Synthesis and characterization of novel thermally stable aromatic and semiaromatic polyamides derived from thiourea-based flexible diacid dichlorides

Abstract  

New diacid dichlorides bearing phenyl thiourea groups were prepared by a facile synthetic approach and characterized using spectroscopic and elemental analyses. A series of novel aromatic and semiaromatic polyamides were prepared via a condensation route from the synthesized diacid dichlorides with 4,4′-oxydianiline. The polymers were characterized by FT-IR, ¹H NMR, ¹³C NMR, and their physical properties, including their solution viscosities, solubilities and thermal properties, were studied too. Polyamides with phenyl thiourea moieties in the backbone showed good solubilities in amide solvents such as DMAc, DMF, DMSO, and NMP. All of the synthesized polymers had η _inh values of 0.042–0.053 dm³/g, and were obtained in quantitative yield. GPC measurements of the synthesized polyamides indicated M _w values of 64,759–86,172. The crystallinity of the polymers was evaluated via their X-ray diffraction patterns. Their glass transition temperatures were found to be 218–229 °C. Furthermore, thermogravimetric analysis indicated that the polymers were thermally stable in the range 300–398 °C in a N₂ atmosphere.     

Organocatalytic enantioselective synthesis of quinolizidine alkaloids (+)-myrtine, (−)-lupinine, and (+)-epiepiquinamide

The organocatalytic synthesis of quinolizidine alkaloids (+)-myrtine, (−)-lupinine, and (+)-epiepiquinamide is described. It involved, as the key step, an enantioselective intramolecular aza-Michael reaction (IMAMR) catalyzed by Jørgensen catalyst I, affording the common precursor with high enantioselectivity. This compound was subsequently transformed into the three alkaloids in a highly diastereoselective manner.     

Highly trifluoromethylated platinum compounds

The homoleptic, square‐planar organoplatinum(II) compound [NBu₄]₂[Pt(CF₃)₄] ( 1 ) undergoes oxidative addition of CF₃I under mild conditions to give rise to the octahedral organoplatinum(IV) complex [NBu₄]₂[Pt(CF₃)₅I] ( 2 ). This highly trifluoromethylated species reacts with Ag⁺ salts of weakly coordinating anions in Me₂CO under a wet‐air stream to afford the aquo derivative [NBu₄][Pt(CF₃)₅(OH₂)] ( 4 ) in around 75 % yield. When the reaction of 2 with the same Ag⁺ salts is carried out in MeCN, the solvento compound [NBu₄][Pt(CF₃)₅(NCMe)] ( 5 ) is obtained in around 80 % yield. The aquo ligand in 4 as well as the MeCN ligand in 5 are labile and can be cleanly replaced by neutral and anionic ligands to furnish a series of pentakis(trifluoromethyl)platinate(IV) compounds with formulae [NBu₄][Pt(CF₃)₅(L)] (L=CO ( 6 ), pyridine (py; 7 ), tetrahydrothiophene (tht; 8 )) and [NBu₄]₂[Pt(CF₃)₅X] (X=Cl ( 9 ), Br ( 10 )). The unusual carbonyl–platinum(IV) derivative [NBu₄][Pt(CF₃)₅(CO)] ( 6 ) is thermally stable and has a ν_CO of 2194 cm^?1. The crystal structures of 2? CH₂Cl₂, 5 , [PPh₄][Pt(CF₃)₅(CO)] ( 6′ ), and 7 have been established by X‐ray diffraction methods. Compound 2 has shown itself to be a convenient entry to the chemistry of highly trifluoromethylated platinum compounds. To the best of our knowledge, compounds 2 and 4 – 10 are the organoelement compounds with the highest CF₃ content to have been isolated and adequately characterized to date.     

Chromium and molybdenum pentacarbonyl complexes of phosphinocarbodithioates: synthesis, molecular structure and behaviour in RAFT polymerisation

Molybdenum and chromium pentacarbonyldiphenylphosphinocarbodithioate complexes have been prepared in a one‐pot reaction from the corresponding metallocarbonyldiphenylphosphine. The complexes have been characterised by IR, ¹H, ³¹P and ¹³C NMR spectroscopies and by mass spectrometry. The solid‐state structures of [Cr(CO)₅{PPh₂CS₂CH(Ph)CH₃}] ( 1 ) and [Mo(CO)₅{PPh₂CS₂CH(Ph)CH₃}] ( 2 ) are reported. Compounds 1 and 2 are isostructural and crystallise in the triclinic P$\bar 1Molybdenum and chromium pentacarbonyldiphenylphosphinocarbodithioate complexes have been prepared in a one-pot reaction from the corresponding metallocarbonyldiphenylphosphine. The complexes have been characterised by IR, (1)H, (31)P and (13)C?NMR spectroscopies and by mass spectrometry. The solid-state structures of [Cr(CO)(5){PPh(2)CS(2)CH(Ph)CH(3)}] (1) and [Mo(CO)(5){PPh(2)CS(2)CH(Ph)CH(3)}] (2) are reported. Compounds 1 and 2 are isostructural and crystallise in the triclinic P1 space group. These new organometallic compounds are highly efficient reversible chain-transfer agents for reversible addition-fragmentation chain-transfer (RAFT) polymerisation of styrene (St) and n-butyl acrylate (nBA), with controlled number-average molar mass values and narrow dispersities (<1.2). The controlled character of the polymerisation was further exemplified by the synthesis of St and nBA diblock copolymers.     

Internal Lewis acid assisted hydrogen bond donor catalysis

Boronate ureas are introduced as a new class of noncovalent catalysts for conjugate addition reactions with enhanced activity. Through intramolecular coordination of the urea functionality to a strategically placed Lewis acid, rate enhancements up to 10 times that of more conventional urea catalysts are observed. The tunable nature of boronate ureas is a particularly attractive feature and enables the rational design of catalysts for optimal performance, in terms of both activity and stereocontrol, in new bond-forming processes.     

Tandem hollow-fiber flow field-flow fractionation

Reinjection of one ore more collected fractions of eluted samples is recognized as a useful procedure in analytical separation techniques, among which field-flow fractionation (FFF), to improve the actual separation of complex samples. Hollow-fiber flow FFF (HF5) is a micro-channel subset of flow FFF (F4), which has recently reached a performance comparable to that of standard, flat-channel F4. To further improve HF5 of complex protein samples, we present a new device and method for in-line, reinjection HF5 that we call tandem HF5 (HF5/HF5). HF5 is ideally suited for tandem operation because (1) small channel volume and low operation flow rates allow reducing dilution and volume of the collected fractions, and (2) the relaxation/focusing step that takes place between the 1st and 2nd run (refocusing) allows reestablishing the volume and concentration of the sample plug before the 2nd elution. HF5/HF5 proves particularly effective in the case of oligomeric proteins since it allows collecting and reinjecting the bands that correspond to each separated oligomeric form. This provides information on the dynamic equilibria between the different oligomers. For HF5/HF5 operations, a modified, prototype HF5 instrumentation is presented which includes a "trap" constituted of a four-port, two-way valve positioned downstream the UV detector and a collection loop. The effect of refocusing conditions on HF5/HF5 performance is investigated by varying refocusing time. With a complex protein samples such as blood serum, HF5/HF5 can improve detectability of the low abundance components since overloading effects due to high-abundance components are reduced. This is shown for serum lipoproteins: while after the 1st run high density lipoproteins (HDLs) are not separated from high-abundance serum proteins, after the 2nd run it is shown possible to separate the HDL subclasses.     

Direct synthesis of NNN-donor enantiopure scorpionate ligands by an efficient diastereoselective nucleophilic addition to imines

New enantiopure imines (1-9) with a chiral substrate to control the stereochemistry of a newly created stereogenic center have been synthesized by reaction of the commercially available (1R)-(-)-myrtenal and different primary amines. The diastereomerically enriched lithium-scorpionate compounds [Li(κ(3)-mobpza)(THF)] (10) (mobpza = N-p-methylphenyl-(1R and 1S)-1-[(1R)-6,6-dimethylbicyclo[3.1.1]-2-hepten-2-yl]-2,2-bis(3,5-dimethylpyrazol-1-yl)ethylamide), [Li(κ(3)-mobpza)(THF)] (11) (mobpza = N-p-methoxyphenyl-(1R and 1S)-1-[(1R)-6,6-dimethylbicyclo[3.1.1]-2-hepten-2-yl]-2,2-bis(3,5-dimethylpyrazol-1-yl)ethylamide), [Li(κ(3)-fbpza)(THF)] (12) (fbpza = N-p-fluorophenyl-(1R and 1S)-1-[(1R)-6,6-dimethylbicyclo[3.1.1]-2-hepten-2-yl]-2,2-bis(3,5-dimethylpyrazol-1-yl)ethylamide), and [Li(κ(3)-clbpza)(THF)] (13) (clbpza = N-p-chlorophenyl-(1R and 1S)-1-[(1R)-6,6-dimethylbicyclo[3.1.1]-2-hepten-2-yl]-2,2-bis(3,5-dimethylpyrazol-1-yl)ethylamide) were obtained by a diastereoselective 1,2-addition of an organolithium reagent to imines in good yield and with good diastereomeric excess (ca. 80%). The complexes [LiCl(κ(2)-R,R-fbpzaH)(THF)] (14) and [LiCl(κ(2)-R,R-clbpzaH)(THF)] (15) were obtained in enantiomerically pure form by the treatment of THF solutions of 12 or 13 with NH(4)Cl. The enantiomerically pure amines (R,R-mbpzaH) (16), (R,R-mobpzaH) (17), (R,R-fbpzaH) (18), and (R,R-clbpzaH) (19) were obtained by hydrolysis of the lithium-scorpionate compounds 10-13 with H(2)O. The lithium compound 12 was reacted with [TiCl(4)(THF)(2)] or [ZrCl(4)] to give the enantiopure complexes [MCl(3)(κ(3)-R,R-fbpza)] [M = Ti (20), Zr (21)]. The amine compound 18 reacted with [MX(4)] (M = Ti, X = O(i)Pr, OEt; M = Zr; X = NMe(2)) to give the complexes [MX(3)(κ(3)-R,R-fbpza)] (22-24). The reaction of Me(3)SiCl with [Zr(NMe(2))(3)(κ(3)-R,R-fbpza)] (24) in different molar ratios led to the halide-amide-containing complexes [ZrCl(NMe(2))(2)(κ(3)-R,R-fbpza)] (25) and [ZrCl(2)(NMe(2))(κ(3)-R,R-fbpza)] (26) and the halide complex 21. The isolation of only one of the three possible diastereoisomers of complexes 25 and 26 revealed that chiral induction from the ligand to the zirconium center took place. The structures of these compounds were elucidated by (1)H and (13)C{(1)H} NMR spectroscopy, and the X-ray crystal structures of 5, 12, 14, 15, and 24 were also established.     

Lanthanide(III)/pyrimidine-4,6-dicarboxylate/oxalate extended frameworks: a detailed study based on the lanthanide contraction and temperature effects

Detailed structural, magnetic, and luminescence studies of six different crystalline phases obtained in the lanthanide/pyrimidine-4,6-dicarboxylate/oxalate system have been afforded: {[Ln(μ-pmdc)(μ-ox)(0.5)(H(2)O)(2)]·3H(2)O}(n) (1-Ln), {[Ln(μ-pmdc)(μ-ox)(0.5)(H(2)O)(3)]·2H(2)O}(n) (2-Ln), {[Ln(μ(3)-pmdc)(μ-ox)(0.5)(H(2)O)(2)]·~2.33H(2)O}(n) (3-Ln), {[Ln(2)(μ(3)-pmdc)(μ(4)-pmdc)(μ-ox)(H(2)O)(3)]·5H(2)O}(n) (4-Ln), {[Ln(μ(3)-pmdc)(μ-ox)(0.5)(H(2)O)(2)]·H(2)O}(n) (5-Ln), and [Ln(pmdc)(1.5)(H(2)O)(2.5)] (6-Ln). The slow generation of the oxalate (ox) anion, obtained from the in situ partial hydrothermal decomposition of the pyrimidine-4,6-dicarboxylate (pmdc) ligand, allows us to obtain good shaped single crystals, while direct addition of potassium oxalate provides the same compounds but as polycrystalline samples. The crystal structures of all compounds are based on the double chelation established by the pmdc and ox ligands to provide distorted 2D honeycomb layers that, in some cases, are fused together, leading to 3D systems, by replacing some of the coordinated water molecules that complete the coordination sphere of the lanthanide by uncoordinated carboxylate oxygen atoms of the pmdc. The presence of channels occupied by crystallization water molecules is also a common feature with the exception of compounds 5-Ln. It is worth noting that compounds 3-Ln present a commensurate crystal structure related to the partial occupancy of the crystallization water molecules placed within the channels. Topological analyses have been carried out, showing a previously nonregistered topology for compounds 4-Ln, named as jcr1. The crystal structures are strongly dependent on the lanthanide ion size and the temperature employed during the hydrothermal synthesis. The lanthanide contraction favors crystal structures involving sterically less hindranced coordination environments for the final members of the lanthanide series. Additionally, reinforcement of the entropic effects at high temperatures directs the crystallization process toward less hydrated crystal structures. The magnetic data of these compounds indicate that the exchange coupling between the lanthanide atoms is almost negligible, so the magnetic behavior is dominated by the spin-orbit coupling and the ligand field perturbation. The luminescence properties that exhibit the compounds containing Nd(III), Eu(III), and Tb(III) have been also characterized.     

Multiplexed binding determination of seven glycoconjugates for Pseudomonas aeruginosa lectin I (PA-IL) using a DNA-based carbohydrate microarray

The binding of seven multivalent glycoconjugates displaying linear or antenna-like structures and different electronic environments were evaluated towards PA-IL on a DNA-based carbohydrate microarray. The affinity can be modulated by the charge and the topology of the galactosylated derivatives.