A differential scanning calorimetry study on poly(ethylene terephthalate) isothermally crystallized at stepwise temperatures: multiple melting behavior re-investigated

The multiple melting behavior of poly(ethylene terephthalate) (PET) was investigated with differential scanning calorimetry (DSC) by examining PET samples having been subjected to special schemes of crystallization and annealing treatment at multiple descending temperatures. Upon such step-wise annealing in decreasing temperatures, the existence of doublet melting peaks in addition to a series of multiple minor peaks in the PET has been demonstrated using carefully designed thermal schemes. Using the Hoffman theory, multiple lamellae populations, might be suggested to be simultaneously present in the PET subjected to such thermal treatments. However, direct experimental evidence has yet to be provided. The low-temperature minor crystals simply melt during normal scanning without having time enough to reorganize into higher-melt crystals. Nevertheless, the effect of scanning on non-isothermal crystallization does exist but is primarily confined to the temperature range much below the main melting region where the crystallization of polymer chains can progress at a reasonable rate. At higher temperatures near the main melting region, annealing for extended times is required in order to result in relative changes of the melting endotherms of the upper and lower peaks in the main melting doublet. In all we have shown that interpretations of the multiple melting phenomenon in semicrystalline polymers can be better refined.     

Zur Polymorphie von SrTeO3

Beside the transition into a ferroelectric phase at 583 K, monoclinic SrTeO₃(I) at ?1260 K transforms slowly into a high-temperature form (SrTeO₃(II)) which after quenching undergoes rapid phase transitions at 648 and 733 K. X-Ray data of triclinic α-SrTeO₃(II) (room temperature), monoclinic β-SrTeO₃(II) (660 K), and monoclinic γ-SrTeO₃(II) (770 K) are presented.     

The inverted cucurbit[n]uril family

We report the isolation, characterization, and recognition behavior of iCB[6] and iCB[7], which are diastereomers of CB[6] and CB[7], respectively, containing a single inverted glycoluril unit. Product resubmission experiments establish that these inverted CB[n] are intermediates in the mechanism of CB[n] formation. As a consequence of the inverted glycoluril ring, these inverted cucurbiturils possess a permanent dipole moment, are slightly smaller than their diastereomers, show distinctive selectivity in their recognition behavior, and report directly on the contents of their hydrophobic cavity.     

Oxidative additions of alkynyl/vinyl iodides to gold and gold-catalyzed vinylation reactions triggered by the MeDalphos ligand

The hemilabile Ad₂P(o-C₆H₄)NMe₂ ligand promotes fast, quantitative and irreversible oxidative addition of alkynyl and vinyl iodides to gold. The reaction is general. It works with a broad range of substrates of various electronic bias and steric demand, and proceeds with complete retention of stereochemistry from Z and E vinyl iodides. Both alkynyl and vinyl iodides react faster than aryl iodides. The elementary step is amenable to catalysis. Oxidative addition of vinyl iodides to gold and π-activation of alkenols (and N-alkenyl amines) at gold have been combined to achieve hetero-vinylation reactions. A number of functionalized heterocycles, i.e. tetrahydrofuranes, tetrahydropyranes, oxepanes and pyrrolidines were obtained thereby (24 examples, 87% average yield). Taking advantage of the chemoselectivity for vinyl iodides over aryl iodides, sequential transformations involving first a hetero-vinylation step and then a C–N coupling, a C–C coupling or an heteroarylation were achieved from a vinyl/aryl bis-iodide substrate.

The hemilabile Ad₂P(o-C₆H₄)NMe₂ ligand promotes fast, quantitative and irreversible oxidative addition of alkynyl and vinyl iodides to gold.     

A systematic study of bovine serum albumin (BSA) and sodium dodecyl sulfate (SDS) interactions by surface tension and small angle X-ray scattering

Classical parameters obtained from surface tension technique coupled to small angle X-ray scattering (SAXS) measurements gave support to investigate conformational changes in the bovine serum albumin (BSA)-sodium dodecyl sulfate (SDS) complexes, as well as the size of the micelle-like clusters distributed along the polypeptide chain. The studied systems were composed of 1 wt% of BSA in the absence and presence of increasing SDS molar concentration up to 80 mM, under experimental conditions of low ionic strength and pH 5.40. At SDS concentrations below the critical aggregation concentration (cac) of 2.2 mM, SAXS results indicate that the detergent does not modify the native protein conformation. However, the beginning of protein unfolding, evidenced by SAXS through an increase in the values of radius of gyration Rg and protein maximum dimension Dmax, is coincident with the onset of SDS cooperative binding to BSA identified by the first breakpoint in the surface tension-SDS profile. Further SDS addition leads to the formation of micelle-like aggregates randomly distributed along the unfolded polypeptide chain, consistent to a necklace and bead model. The SAXS data also demonstrate that the SDS micelles grow in size up to 50 mM detergent. At 50 mM surfactant, the micelles stop growing. This concentration is near the BSA saturation binding by SDS measured by dialyzes and indicated by the second breakpoint in surface tension-SDS profile. The SAXS and surface tension data are also consistent with the formation of free micelles in equilibrium with BSA-SDS complexes for surfactant amount above the saturation.     

Investigation on corrosion inhibition and adsorption mechanism of azomethine derivatives at mild steel/0.5 ​M ​H2SO4 solution interface: Gravimetric,electrochemical, SEM and EDX studies

The inhibition performance of five azomethine derivatives such as: 1-(4-Methyloxy phenylimino)-1-(phenylhydrazono)-propan-2-one (SB₁), 1-(4-Methylphenylimino)-1-(phenylhydrazono) propan-2-one (SB₂), 1-(phenylimino)-1(phenylhydrazono)-propan-2-one (SB₃), 1-(4-Bromo phenylimino)-1(phenylhydrazono)-propan-2-one (SB₄) and 1-(4-Chlorophenylimino)-1(phenylhydrazono) -propan-2-on (SB₅) as corrosion inhibitors for mild steel in sulfuric acid 0.5 ?M were investigated using different methods. All experimental results demonstrate that these compounds are eficients inhibitors. The inhibition efficiencies ($IE$) increase with inhibitors concentration. At 7.5 $\times$ 10^?5 ?M, the $IE$ was 97.27%, 96.31%, 94.23%, 93.19 and 91.64% for SB₁, SB₂, SB₃, SB₄ and SB₅, respectively. The potentiodynamic polarization results indicated that all the studied inhibitors act as mixed type. The adsorption process on mild steel surface obeyed Langmuir isotherm. The associated activation parameters and thermodynamic have been calculated and discussed. The adsorbed film formed on the metal surface was characterized by SEM and EDX.     

Reactions of quaternized imidazo-quinazoline and-pyridopyrimidine with active methylene compounds

Summary Syntheses of 1-methylimidazo[1,2-c]quinazolinium iodide (3) and 1-methylimidazo[2,1-f]pyrido[3,2-d]pyrimidinium iodide (4) are described. These tricyclic compounds react with nucleophiles derived from active methylene compounds to give the corresponding open-chain enamines.

---

Reaktionen von quaternisierten Imidazo-Chinazolinen und -Pyridopyrimidinen mit Verbindungen mit reaktiven Methylengruppen

Zusammenfassung Synthesen von 1-Methylimidazo[1,2-c]chinazoliniumjodid (3) und 1-Methylimidazo[2,1-f]pyrido[3,2-d]pyrimidiniumjodid (4) werden beschrieben. Diese tricyclischen Verbindungen reagieren mit einigen Carbanionen aus Verbindungen mit reaktiven Methylengruppen, wobei die offenkettigen Enamine entstehen.

     

Modeling of submicrometer aerosol penetration through sintered granular membrane filters

We present a deep-bed aerosol filtration model that can be used to estimate the efficiency of sintered granular membrane filters in the region of the most penetrating particle size. In this region the capture of submicrometer aerosols, much smaller than the filter pore size, takes place mainly via Brownian diffusion and direct interception acting in synergy. By modeling the disordered sintered grain packing of such filters as a simple cubic lattice, and mapping the corresponding 3D connected pore volume onto a discrete cylindrical pore network, the efficiency of a granular filter can be estimated, using new analytical results for the efficiency of cylindrical pores. This model for aerosol penetration in sintered granular filters includes flow slip and the kinetics of particle capture by the pore surface. With a unique choice for two parameters, namely the structural tortuosity and effective kinetic coefficient of particle adsorption, this semiempirical model can account for the experimental efficiency of a new class of "high-efficiency particulate air" ceramic membrane filters as a function of particle size over a wide range of filter thickness and texture (pore size and porosity) and operating conditions (face velocity).     

Two organometallic fragments inclusioned in a 1,3-alternate calix[4]arene tetraphosphane: evidence for transition metal-arene interaction through the cavity

The preparation of an 1,3-alternate calix[4]arene tetraphosphane ligand, 25,26,27,28-tetrakis{2-(diphenylphosphino)ethoxy}calix[4]arene (4), is described. Ligand 4 is obtained in four steps in 17% overall yield. Reaction of 4 with AgBF4 produced the encapsulated two silver complex [Ag2{(P,P,P,P)-tetraphencalix[4]arene}](BF4)2. The solid-state structure shows that the encapsulated silver undergoes a substantial pi-interaction by two opposite arene rings. Rhodation of 4 employing [Rh(cot)2]BF4 yielded the encapsulated complex with a bent coordination mode. Two organometallic fragments inclusioned inside a 1,3-alternate calix[4]arene tetraphosphane was also achieved by the reaction of 4 with [PtH(PPh3)2 (thf)]+. Full characterization includes X-ray structural studies of compounds 4-6.