Long-range interaction in the D and D′ states of H2

The interaction energy between two hydrogen atoms in the D and D′ ¹Π_u states of the hydrogen molecule has been calculated for large internuclear distances (12 ? R ? 25 bohr). The variational method and a very flexible trial wave-function were used. The results indicate that for the states under consideration the Rayleigh-Schrödinger perturbation theory with the multipole expansion of the interaction hamiltonian gives reliable results only for R > 25 bohr i.e. in the region where the interaction energies are practically negligible.     

Simple Method for Simultaneous Determination of Selenium and Arsenic in Human Hair by Means of Atomic Fluorescence Spectrometry with Hydride Generation Technique

This study describes a simple, rapid and reliable method for simultaneous determination of selenium and arsenic in human hair by means of atomic fluorescence spectrometry combined with a hydride generation technique (HG-AFS). The procedure developed encompasses microwave digestion of a sample in the nitric acid environment only. The interferences caused by nitrous oxides are eliminated by removing a gas from above the digested solution with a stream of argon. The sample is then chemically treated in a flow-through hydride generation system and exposed to measurements in a double-channel atomic fluorescence spectrometer. The method permits determining both analytes in the linear range of 0.5–100µgL^–1 with a detection limit equal to 0.2µgL^–1, as well as with very good repeatability not exceeding 1% for Se and 2% for As. No mutual interferences from either of the analytes in the concentrations ranges matching the hair composition were found. The method was verified in terms of accuracy with the use of a reference material and then applied to the analysis of the natural samples of human hair.     

Reaction of Trimethylbenzene over Alumina-Pillared Montmorillonite

The reaction of trimethylbenzene (TMB) over alumina-pillared montmorillonite (Al-PM) had been investigated in a fixed-bed flow reactor at 300 °C and atmospheric pressure. Al-PM calcined in the range 300-500 °C exhibited decreased layer distance, surface area and acid amount. The strong acid sites of Al-PM calcined at 500 °C were greatly diminished according to measurements of ammonia temperature-programmed desorption. Under our conditions the reaction proceeded mainly via isomerization and disproportionation with little dealkylation. The conversion of reactant decreased in the order 1,2,3-TMB ≥ 1,2,4-TMB > 1,3,5-TMB and the selectivity of isomerization in the order 1,2,3-TMB > 1,3,5-TMB > 1,2,4-TMB, corresponding to the order of diminishing thermal instability. Both the catalytic activity and the selectivity ratio of disproportionation to isomerization decreased with increased calcined temperature and time-on-stream. o-Xylene content in the total xylene produced from 1,2,4-TMB or 1,2,3-TMB greatly exceeded the composition at thermodynamic equilibrium. These results arc consistent with the decrease of both the strong acid sites and the pore size of Al-PM which exhibits the restricted transition state selectivity.     

TheSemmler-Wolff aromatization andSchmidt reaction applied to some pyrido[2′,3′:3,4]pyrazolo[5,1-c][1,2,4]benzotriazines

Pyrido[2,3:3,4]pyrazolo[5,1-c][1,2,4]benzotriazin-4(1H)ones were transformed via their oximes in aSemmler-Wolff aromatization process in the tetracyclic heteroaromatic amines4 or bySchmidt reaction into a mixture of the same amine4 and a ring enlarged lactam3. Syntheses of some halo pyrazolo[3,4-b]pyridines and a photochemical transformation of 3-azidopyrazolo[3,4-b]pyridine are also described.

---

Über dieSemmler-Wolff- undSchmidt-Reaktion einiger Pyrido[2,3:3,4]pyrazolo[5,1-c][1,2,4]benzotriazine

Zusammenfassung Pyrido[23:3,4]pyrazolo[5,1-c][1,2,4]benzotriazin-4(1H)one werden über Oxime in einerSemmler-Wolff-Reaktion in die tetracyklischen aromatischen Amine4 umgewandelt. In einerSchmidt-Reaktion wurden dieselben Ketone in ein Gemisch aus Amin4 und Lactam3 übergeführt. Synthesen von halogensubstituierten Pyrazolo[3,4-b]pyridinen und photochemische Umwandlung von 3-Azidopyrazolo[3,4-b]pyridin werden beschrieben.

     

Self-assembly of rectangles and prisms via a molecular "clip"

Aromatic molecular "clips" bearing two symmetrically bound platinum moieties have been prepared. The molecular "clip" 4 readily self-assembled with linear linkers such as 4,4'-bipyridyl, 1,4-bis[2-(4-isocyano-3,5-diisopropylphenyl)ethynyl]benzene, and nicotinic acid to form molecular rectangles. The overall dimensions of the rectangle 7 were 7.3 Angstroms x 15.3 Angstroms. The molecular "clip" also self-assembled with tritopic pyridyl and isocyanide ligands to form trigonal prismatic frameworks. The characterization of the supramolecules by multinuclear NMR, electrospray mass spectrometry, and X-ray crystal structures is also reported.     

CH...O and CH...F links form the cage structure of dioxane-trifluoromethane

The molecular beam Fourier transform microwave spectrum of 1,4-dioxane-trifluoromethane has been assigned and measured. The two subunits form a cage stabilized by one C-H...O and two C-H...F weak hydrogen bonds. The C-H...O link involves the axial lone pair of one of the two equivalent ring oxygens, while the two C-H...F bridges connect trifluoromethane to the two axial hydrogens in positions 3 and 5. The dissociation energy has been estimated from the D(J) centrifugal distortion parameter to be approximately 6.8 kJ/mol.     

Triiron and Triruthenium Carbonyl Clusters Bearing Bridging Long Chain Diphosphine and Capping Chalcogenido Ligands

Treatment of Ru₃(CO)₁₂ with dpphSe₂ (dpph = 1,6-bis(diphenylphosphino)hexane) in refluxing toluene in the presence of Me₃NO afforded two new compounds, Ru₃(CO)₇(-CO)(₃-Se)(-dpph) (1) and Ru₃(CO)₇(₃-Se)₂(-dpph) (2). A similar reaction of Ru₃(CO)₁₂ with dpppeSe₂ (dpppe = 1,5-bis(diphenylphosphino)pentane) gave exclusively Ru₃(CO)₇(₃-Se)₂(-dpppe) (3). Treatment of Ru₃(CO)₁₂ with dpphS₂ and dpppeS₂ at 110°C in the presence of Me₃NO afforded Ru₃(CO)₇(₃-S)₂(-dpph) (4) and Ru₃(CO)₇(₃-S)₂(-dpppe) (5), respectively. Reactions of Fe₃(CO)₁₂ with dpphSe₂ and dpppeSe₂, under identical conditions, afforded Fe₃(CO)₇(₃-Se)₂(-dpph) (6) and Fe₃(CO)₇(₃-Se)₂(-dpppe) (7), respectively. Compounds 1–7 were characterized spectroscopically and the molecular structures of compounds 1–4 were determined by single crystal X-ray crystallography. The core of 1 contains an equilateral triangle of ruthenium atoms with one capping selenium, one bridging dpph, one doubly bridging carbonyl and seven terminal carbonyl ligands. Complexes 2–4 have a square-pyramidal structure with two metal and two chalcogenide atoms alternating in the basal plane and the third metal atom at the apex of the pyramid, and belong to the family of well-known nido clusters with seven skeletal electron pairs.     

Coelectroosmotic capillary electrophoresis of phenolic acids and derivatized amino acids using N,N-dimethylacrylamide-ethylpyrrolidine methacrylate physically coated capillaries

Two different families of compounds, i.e., phenolic and amino acids have been separated by capillary electrophoresis using a physically adsorbed polymer as capillary coating. The polymer used was N,N-dimethylacrylamide-ethylpyrrolidine methacrylate (DMA-EpyM) and it provided an stable coating by only flushing the capillary with a DMA-EpyM aqueous solution for 2 min between runs. The usefulness of this procedure has been demonstrated through the fast analysis of different families of solutes. Two different detection systems, diode-array detector and laser-induced fluorescence, have been used to determine phenolic acids and derivatized amino acids with fluorescein isothiocyanate, respectively. The main factors affecting reversal of electroosmotic flow (EOF) such as pH, type and concentration of buffer, and concentration and influence of organic solvents, as well as all the instrumental conditions were studied and optimized for both families of compounds.     

A method for the palladium-catalyzed allylic oxidation of olefins

Olefins are converted into allylic acetates by treatment in acetic acid with a catalytic amount of palladium bis(trifluoroacetate) and one equivalent of benzoquinone as oxidant. The reaction is selective for oxidation of a terminal methyl group of geranylacetone.     

Preparation and characterization of electrodeposited Ni-Ru alloys: morphological and catalytic study

Nickel-ruthenium alloys with various compositions have been deposited by electrodeposition for the first time. Cyclic voltammetry and linear stripping voltammetry measurements show that codeposition of nickel with ruthenium is possible below the potential value of nickel reduction. High-quality alloys containing nickel and ruthenium can be plated at cathodic potentials ranging from − 0.5 to − 1.0 V vs SCE. Deposited coatings were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and atomic force microscopy (AFM). The diffractograms obtained show that an increase of nickel concentration in alloy will lead to a change in the phase composition and formation of NiRu (100) and (101) phases which is observed to be 78 mas.% Ni. SEM studies confirm the surface homogeneity and presence of small, regular grains. AFM observation allows the estimation of the real surface area of obtained alloys which increase with more negative electrodeposition potentials. Ni-Ru alloys were found to be highly electroactive in the water splitting process, which can be connected with the presence of the NiRu phase and a well-developed electroactive area.

Electrochemical deposition of Ni-Ru alloys with various composition and their catalytic activity in water splitting process