Promoting effect of Pt in Ni-based catalysts for CH4 reforming

The effect of Pt/Ni ratio on the surface properties and catalytic behavior of bimetallic PtNi catalysts for reforming of methane with CO₂ was studied. The TPR, FTIR of adsorbed CO and XPS data showed that introduction of a small amount of Pt (0.3 – 0.5 wt.%) into the Ni catalyst leads to a decrease of the NiO size, its easy reduction and a uniform distribution of the nickel metal particles.     

CH...O and CH...F links form the cage structure of dioxane-trifluoromethane

The molecular beam Fourier transform microwave spectrum of 1,4-dioxane-trifluoromethane has been assigned and measured. The two subunits form a cage stabilized by one C-H...O and two C-H...F weak hydrogen bonds. The C-H...O link involves the axial lone pair of one of the two equivalent ring oxygens, while the two C-H...F bridges connect trifluoromethane to the two axial hydrogens in positions 3 and 5. The dissociation energy has been estimated from the D(J) centrifugal distortion parameter to be approximately 6.8 kJ/mol.     

In situ infrared study of SBA-15 functionalized with carboxylic groups incorporated by a co-condensation route

Two samples of SBA-15 mesoporous silica with a different content of carboxylic groups (-COOH) were prepared by a co-condensation route, using 4-(triethoxysilil)butyronitrile as the organosilane agent, then treating the samples with sulfuric acid, which removes the template and simultaneously hydrolyses the -CN to -COOH groups, as shown by IR spectroscopy. Both incorporation of organosilane agents and subsequent acid treatment do not affect the ordered SBA-15 structure. The proton-donor ability of carboxylic groups, as well their accessibility to reactants, has been studied in the IR by dosing ammonia, which forms reversibly COO- groups and NH4+ ions. The related equilibrium constants have been determined by elaboration of IR data. Outgassing the samples at progressively increasing temperatures destabilizes to an increasing extent the ammonium/carboxylate ion pair, because of the decrease in surface polarity brought about by dehydration: this decreases the related equilibrium constants. The amount of carboxylic groups undergoing reaction appears instead to be constant with dehydration, and to coincide with the whole population of COOH groups. Titration with alkali solutions yielded surface concentrations for the two samples of ca. 1.0 and 0.45 COOH/nm2. Proportionality between the surface concentrations and the intensities of the C=O IR band is observed: this suggests that COOH groups are noninteracting with each other and allows the computation of the related extinction molar coefficient.     

New [Mo(eta3-allyl)(CO)2L3]+ complexes with monodentate or tridentate nitrogen-donor ligands

Cationic complexes [Mo(eta(3)-allyl)(CO)2L3]+ (L3 = either nitrogen-donor tridentate ligand or three monodentate ligands) were prepared in high yield and under mild conditions using as precursors either the triflato complex [Mo(eta(3)-allyl)(OTf)(CO)2(NCMe)2] or the combination of the chloro complex [Mo(eta(3)-allyl)Cl(CO)2(NCMe)2] and the salt NaBAr'(4)(Ar'= 3,5-bis(trifluoromethyl)phenyl). The tridentate ligands employed were 2,2':6',2'-terpyridine (terpy) and cis,cis-1,3,5-cyclohexanetriamine (CHTA), whereas the monodentate ligands imidazole (im) and 3,5-dimethylpyrazole (dmpz) were chosen. In order to stabilize the labile intermediates, an excess of acetonitrile was used in most of the syntheses. However, the pyrazole complex was prepared through a nitrile-free route to avoid reactions at the coordinated nitrile. The solid state structures of [Mo(eta(3)-methallyl)(CO)2(terpy)]OTf (2), [Mo(eta(3)-methallyl)(CO)2(CHTA)]BAr'4 (3), [Mo(eta(3)-methallyl)(CO)2(NCMe)3]BAr'4 (4), [Mo(eta(3)-allyl)(CO)2(im)3]OTf (5) and [Mo(eta(3)-allyl)(CO)2(dmpz)3]BAr'4 (6) were determined by means of single-crystal X-ray diffraction.     

Pickering emulsions with controllable stability

We prepare solid-stabilized emulsions using paramagnetic particles at an oil/water interface that can undergo macroscopic phase separation upon application of an external magnetic field. A critical field strength is found for which emulsion droplets begin to translate into the continuous-phase fluid. At higher fields, the emulsions destabilize, leading to a fully phase-separated system. This effect is reversible, and long-term stability can be recovered by remixing the components with mechanical agitation.     

New antiproliferative 14,15-secopregnane glycosides from Solenostemma argel

Eight new 14,15-secopregnane glycosides, namely argelosides C-J, possessing two ketal functions involved in three five-membered rings, have been isolated from the hairy seeds of Solenostemma argel. Their structures have been established by MS and NMR experiments, combined with quantum mechanical calculations of the ¹³C chemical shifts for the interpretation of the experimental data. On the basis of the obtained results, the structures of argelosides A and B have been revised. Additionally, the effect of these compounds on the VEGF-induced in Kaposi's sarcoma cell proliferation was evaluated. Results indicated that all the compounds reduced the cell proliferation in a dose-dependent manner.     

Cyclopentathiadiazines, new heterocyclic materials from cyclic enaminonitriles

Indene and cyclopentene enaminonitriles were reacted with SCl2, iBu3N and NCS to give the first cyclopenta[1,2,6]thiadiazines that showed unusual characteristics, one as a NIR dye and another as a liquid crystal.     

Correction to: Foreword to the memorial issue for Professor Roberto Marassi

Journal of Solid State Electrochemistry -     

Analysis of Fatty Acids,Amino Acids and Volatile Profile of Apple By-Products by Gas Chromatography-Mass Spectrometry

Apple industrial by-products are a promising source of bioactive compounds with direct implications on human health. The main goal of the present work was to characterize the Jonathan and Golden Delicious by-products from their fatty acid, amino acid, and volatile aroma compounds’ point of view. GC-MS (gas chromatography-mass spectrometry) and ITEX/GC-MS methods were used for the by-products characterization. Linoleic and oleic were the main fatty acids identified in all samples, while palmitic and stearic acid were the representant of saturated ones. With respect to amino acids, from the essential group, isoleucine was the majority compound identified in JS (Jonathan skin) and GS (Golden skin) samples, lysine was the representant of JP (Jonathan pomace), and valine was mainly identified in GP (Golden pomace). A total number of 47 aroma volatile compounds were quantified in all samples, from which the esters groups ranged from 41.55–53.29%, aldehydes 29.75–43.99%, alcohols from 4.15 to 6.37%, ketones 4.14–5.72%, and the terpenes and terpenoids group reached values between 2.27% and 4.61%. Moreover, the by-products were valorized in biscuits manufacturing, highlighting their importance in enhancing the volatile aroma compounds, color, and sensorial analysis of the final baked goods.     

Investigation on corrosion inhibition and adsorption mechanism of azomethine derivatives at mild steel/0.5 ​M ​H2SO4 solution interface: Gravimetric,electrochemical, SEM and EDX studies

The inhibition performance of five azomethine derivatives such as: 1-(4-Methyloxy phenylimino)-1-(phenylhydrazono)-propan-2-one (SB₁), 1-(4-Methylphenylimino)-1-(phenylhydrazono) propan-2-one (SB₂), 1-(phenylimino)-1(phenylhydrazono)-propan-2-one (SB₃), 1-(4-Bromo phenylimino)-1(phenylhydrazono)-propan-2-one (SB₄) and 1-(4-Chlorophenylimino)-1(phenylhydrazono) -propan-2-on (SB₅) as corrosion inhibitors for mild steel in sulfuric acid 0.5 ?M were investigated using different methods. All experimental results demonstrate that these compounds are eficients inhibitors. The inhibition efficiencies ($IE$) increase with inhibitors concentration. At 7.5 $\times$ 10^?5 ?M, the $IE$ was 97.27%, 96.31%, 94.23%, 93.19 and 91.64% for SB₁, SB₂, SB₃, SB₄ and SB₅, respectively. The potentiodynamic polarization results indicated that all the studied inhibitors act as mixed type. The adsorption process on mild steel surface obeyed Langmuir isotherm. The associated activation parameters and thermodynamic have been calculated and discussed. The adsorbed film formed on the metal surface was characterized by SEM and EDX.