Carbon composite electrodes: surface and electrochemical properties

Electrodes based on particulate carbon-epoxy or silicone composites have been formed and characterised using electrochemical methods, scanning electron microscopy and scanning electrochemical microscopy. These composites are rigid, exhibit high electrical conductivity and are stable in organic solvents for prolonged periods. The bulk resistance of the Araldite-M and Araldite-CW2215 based electrodes is low, 130+/-12 and 185+/-15 ohms, respectively. In contrast, the bulk resistance of the silicone based electrodes is 1480+/-112 ohms. The uncompensated resistance of electrochemical cells where the composites act as working electrodes is significantly larger than that expected on the basis of solution resistance alone, i.e., up to 7.5 kohms in the case of the silicone composites. These results are interpreted in terms of the presence of pores within the composite material. The response times of the composite electrodes to changes in the applied potential is between 3.1 and 7.2 ms which, although almost an order of magnitude longer than a comparable glassy carbon electrode, is sufficiently rapid to give useful voltammetric data for scan rates of several V s(-1). Close to ideal reversible cyclic voltammetry is observed for ferrocene under semi-infinite diffusion control for scan rates between 0.01 and 0.1 V s(-1) at the Araldite composites. In contrast, the large resistance associated with the silicone based materials causes quasi-reversible responses to be observed over this range of scan rate. Scan rate dependent cyclic voltammetry and time resolved chronoamperometry responses observed for ferrocene in solution are consistent with those expected for a random array of microelectrodes. Scanning electron microscopy and scanning electrochemical microscopy has been used to image the shape, size and electrochemical activity of the electroactive zones. In the case of Araldite-M, the quality of the electrode surface has been probed by comparing the rate of heterogeneous electron transfer at a composite microelectrode with that found for a carbon fibre electrode. The standard heterogeneous electron transfer rate constant, k degrees , is 6.0+/-0.1 x 10(-3) cm s(-1) for the composite compared to 1.5+/-0.1 x 10(-1) cm s(-1) for the carbon fibre electrode. While the smaller rate constant found for the composite suggests a less pristine surface, k degrees is sufficiently large to support reversible, electron transfer under typical electroanalytical conditions. These fundamental measurements will underpin the development of enzyme based biosensors for use in organic solvents.     

Fractal scattering of microwaves from soils

Using a combination of laboratory experiments and computer simulation we show that microwaves reflected from and transmitted through soil have a fractal dimension correlated to that of the soil's hierarchic permittivity network. The mathematical model relating the ground-penetrating radar record to the mass fractal dimension of soil structure is also developed. The fractal signature of the scattered microwaves correlates well with some physical and mechanical properties of soils.     

Characterization of the Suzuki phase in doped alkali halides by Raman spectroscopy

The symmetries and frequencies of the Raman active modes of the Suzuki phase in the systems 6NaCl:CdCl₂; and 6NaCl:MnCl₂, have been calculated. Three of the four peaks allowed by symmetry (A_1g and 2F_g) agree to within 25% in position with the experimental values presented here and with other experimental results. The fourth peak (E_g) seems to be associated with a very soft mode, which explains why this peak has not been observed. The features of the Raman spectrum depend mainly upon the chlorine ions.     

Quasi-particle density of states of the one-dimensional Anderson-Hubbard Hamiltonian

The quasi-particle density of states of the one-dimensional Anderson-Hubbard Hamiltonian has been calculated. The effect of correlation on the local density of states of a disordered chain is shown to depend critically on the energy region.     

Enhancing sonochemical activity in aqueous media using power-modulated pulsed ultrasound: an initial study

Relatively little is known about the effects of pulsed ultrasound on the facilitation of chemical reactivity. Previous studies have indicated that sonochemistry using pulses is generally less effective than continuous ultrasonic irradiation. However, the pulse trains employed were such that the peak power of the pulses was the same as the maximum power used in continuous irradiation. As a result, less acoustic energy was transmitted to the solutions over the same period of time. The effectiveness of ultrasound when the pulse is adjusted so that the same amount of acoustic energy is input compared to continuous irradiation over a given time has not been previously explored. In this study we have embarked on an examination of the efficacy of power-modulated pulsed (PMP) sonochemistry. Specifically, we have explored the effects of pulse type and pulse frequency on the oxidation of potassium iodide and the degradation of acid orange, a common industrial colorant. A rate increase by a factor of three was observed compared with continuous irradiation under conditions of equivalent acoustic input power.     

Radical reaction of sodium hypophosphite with terminal alkynes: synthesis of 1,1-bis-H-phosphinates

[reaction: see text] The room-temperature radical addition of sodium hypophosphite to terminal alkynes produces the previously unknown 1-alkyl-1,1-bis-H-phosphinates in moderate yield. The reaction is initiated by R3B and air and proceeds under mild conditions in an open container. The bissodium salts precipitate spontaneously from the reaction mixtures, thus providing a simple purification procedure and the opportunity for multigram synthesis. The 1,1-bis-H-phosphinate products are novel precursors of the biologically important 1,1-bisphosphonates.     

Locally periodic Timoshenko rod: experiment and theory

The flexural vibrations of a locally periodic rod, which consists of N unit cells, are discussed both from the experimental and theoretical points of view. Timoshenko's beam theory and the transfer matrix method are used to calculate the normal-mode frequencies and amplitudes. The theoretical values are then compared with the experimental ones, which are obtained using an electromagnetic acoustic transducer (EMAT). Good agreement between the numerical results and the experimental measurements is obtained. It is shown that as N grows, a band spectrum emerges.     

Development of a capillary zone electrophoretic method to determine six antidepressants in their pharmaceutical preparations. Experimental design for evaluating the ruggedness of method

A capillary zone electrophoresis method is proposed for the separation of six of the antidepressants most used for the treatment of mental illness (clomipramine, paroxetine, fluoxetine, citalopram, fluvoxamine, and trazodone). Optimum conditions for their separation were investigated. A background electrolyte solution consisting of 50 mM phosphate buffer adjusted to pH 2.0, hydrodynamic injection, and 25 kV as separation voltage were used. Relative standard deviations (RSD) were <0.38% and <2.93% for migration time and corrected peak area (n = 24), respectively. Detection limits obtained for the six antidepressants ranged from 0.03 to 0.11 mg L(-1). Stability of the solutions, linear concentration range, accuracy, and precision were examined during validation of the method. A ruggedness test of this method was performed using the fractional factorial model of Plackett-Burman, requiring in our case design of a matrix of 15 experiments, in which the influence of seven factors at three different levels was tested on different electrophoretic results: efficiency; resolution; and corrected peak area. Statistical evaluation of electrophoretic results was achieved by Youden and Steiner's method. The described method is rapid, sensitive, and rugged and it was tested for the pharmaceutical formulation analysis, giving recoveries between 95.6 and 99.1% with respect to the nominal content.     

Network synthesis under survivability constraints

Telecommunication networks are subject to link and equipment failures. Since failures cannot be entirely avoided, networks have to be designed so as to survive failure situations. In this paper, we are interested in designing low cost survivable networks. Given point-to-point traffic demands and a cost/capacity function for each link, we aim at finding the minimum cost capacities satisfying the given demands and survivability requirements. A survivability model that reroutes interrupted traffic using all the available capacities on the network is presented and studied. In the proposed model, capacity and flow assignments for each network operating state are jointly optimized. We prove the -hardness of the optimisation problem defined by dual constraints. Then, we propose a polynomial relaxation along with a fast heuristic to compute a feasible solution of the problem from its relaxed optimal solution. Our solution approaches are tested on a set of problem instances.Received: September 2002, Revised: July 2003, AMS classification: 90C05     

Metal-chelating nanoparticles as selective fluorescent sensor for Cu2+

A fluorescent sensor for Cu(2+) at the nanomolar level in water has been designed by associating a BODIPY fluorophore and a selective ligand (cyclam) in ultrafine polymer nanoparticles.