Synthesis and characterization of a family of layered trichalcogenides for assisted hydrogen photogeneration

Three layered trisulfides (TiS₃, ZrS₃, HfS₃) have been synthesized by solid–gas reaction between metal and sulfur in a vacuum sealed ampoule at 550 °C during 60 h. The samples used in this work were prepared from a colloidal suspension of powder of each one of the metal trisulfides (MS₃, M = Ti, Zr, Hf) in ethanol and deposited on titanium disks and quartz substrates by ”drop coating” technique. These samples have been characterized by X‐ray diffraction, energy dispersive analysis of X‐ray and scanning electron microscopy. The obtained direct optical band gaps are 1.0 ± 0.1 eV, 2.0 ± 0.1 eV and 2.2 ± 0.1 eV for TiS₃, ZrS₃ and HfS₃, respectively. Photoelectrochemical measurements in 0.5 M Na₂SO₃ have been carried out to characterize the MS₃/electrolyte interface. The flat‐band potentials (V_fb) vs. Ag/AgCl measured by electrochemical impedance spectroscopy (EIS) are –0.84 ± 0.02 V (TiS₃), –0.93 ± 0.02 V (ZrS₃) and –0.92 ± 0.02 V (HfS₃). Hydrogen generation was investigated in a photoelectrochemical cell (PEC) with MS₃ as photoanodes under white light illumination of 200 ± 20 mW/cm² at external bias potentials of 0.3 V vs. Ag/AgCl. Hydrogen evolution flows have been quantified by quadrupole mass spectrometry (QMS) reaching instantaneous values up to 19 ± 2 nmol H₂/min cm² with TiS₃ as photoanode.     

Synthesis of a C(sp2)-bridged Phosphine-Borane by Ionic Coupling

The vinyl carbenoid H₂C=CBr(Li) has been used as key precursor to prepare a geminal C(sp²)-bridged phosphine-borane. Starting from bromoethene, two sequences of lithiation/electrophilic trapping, with ClPiPr₂ and FBMes₂ respectively, affords iPr₂P–C(=CH₂)–BMes₂ 3 [Mes = 2,4,6-(H₃C)₃C₆H₂]. This new phosphine-borane 3 was characterized by multi-nuclear NMR and mass spectroscopy. It adopts a monomeric open structure without P→B interaction. A few crystals of a secondary product 4 were analyzed by X-ray diffraction, revealing an unusual dimeric structure.     

Towards CRISPR powered electrochemical sensing for smart diagnostics

Even though global health has been steadily improved, the global disease burden associated with communicable and non-communicable diseases extensively increased healthcare expenditure. The present COVID-19 pandemic scenario has again ascertained the importance of clinical diagnostics as a basis to make life-saving decisions. In this context, there is a need for developing next-generation integrated smart real-time responsive biosensors with high selectivity and sensitivity. The emergence of clustered regularly interspaced short palindromic repeats (CRISPR)/Cas biosensing systems has shown remarkable potential for developing next-generation biosensors. CRISPR/Cas integrated electrochemical biosensors (E-CRISPR) stands out with excellent properties. In this opinionated review, we illustrate the rapidly evolving applications for E-CRISPR-integrated detection systems towards biosensing and the future scope associated with E-CRISPR based diagnostics.     

Evaluation of Phoma sp. Biomass as an Endophytic Fungus for Synthesis of Extracellular Gold Nanoparticles with Antibacterial and Antifungal Properties

The aim of our study was to examine the different concentrations of AuNPs as a new antimicrobial substance to control the pathogenic activity. The extracellular synthesis of AuNPs performed by using Phoma sp. as an endophytic fungus. Endophytic fungus was isolated from vascular tissue of peach trees (Prunus persica) from Baft, located in Kerman province, Iran. The UltraViolet-Visible Spectroscopy (UV–Vis spectroscopy) and Fourier transform infrared spectroscopy provided the absorbance peak at 526 nm, while the X-ray diffraction and transmission electron microscopy images released the formation of spherical AuNPs with sizes in the range of 10–100 nm. The findings of inhibition zone test of Au nanoparticles (AuNPs) showed a desirable antifungal and antibacterial activity against phytopathogens including Rhizoctonia solani AG1-IA (AG1-IA has been identified as the dominant anastomosis group) and Xanthomonas oryzae pv. oryzae. The highest inhibition level against sclerotia formation was 93% for AuNPs at a concentration of 80 μg/mL. Application of endophytic fungus biomass for synthesis of AuNPs is relatively inexpensive, single step and environmentally friendly. In vitro study of the antifungal activity of AuNPs at concentrations of 10, 20, 40 and 80 μg/mL was conducted against rice fungal pathogen R. solani to reduce sclerotia formation. The experimental data revealed that the Inhibition rate (RH) for sclerotia formation was (15, 33, 74 and 93%), respectively, for their corresponding AuNPs concentrations (10, 20, 40 and 80 μg/mL). Our findings obviously indicated that the RH strongly depend on AuNPs rates, and enhance upon an increase in AuNPs rates. The application of endophytic fungi biomass for green synthesis is our future goal.     

CW laser-induced photothermal conversion and shape transformation of gold nanodogbones in hydrated chitosan films

We investigate the photothermal conversion and transformation of gold nanoparticles with an initial dogbone shape after dispersion in hydrated chitosan films, which is a representative model of biological tissue, and excitation by a CW diode laser for 1 min. Gold nanodogbones are observed to undergo a distinct modification above a sharp threshold of ~11 W cm⁻² and 110 °C. Surprisingly, the very same modification is achieved up to at least 36 W cm⁻² and 250 °C. We use an analytical model derived from Gans theory to associate the change in color of the films with the change in shape statistics of these gold nanoparticles. This model proves both convenient and dependable. We interpret the photothermal transformation as a rearrangement of particles with a dogbone shape and an aspect ratio of 4.1 into rods with an aspect ratio of 2.5, where material from the end lobes of the dogbones may relocate to the waists of the rods. In turn, additional transitions to stable gold nanospheres may exhibit fairly slower kinetics.     

Parallel or classical kinetic resolution of a planar chiral ferrocenylketone through asymmetric reductions

Racemic 1-acetyl-2-methoxymethylferrocene, (±)-1 was subjected to asymmetric reduction with two different methodologies and complementary results were obtained. When the reduction of (±)-1 was carried out in the presence of CBS-oxazaborolidine catalyst and BH₃·Me₂S as the hydrogen source, both enantiomers of the substrate were converted with comparable reaction rates and selectivities. The corresponding diastereoisomeric ferrocenylalcohols 3a and 3b were obtained in a 1:1 ratio and >90% enantiomeric excess; this reaction profile being related with a parallel kinetic resolution with high ds₁ and ds₂ diastereofacial selectivities. On the contrary, the transfer hydrogenation of (±)-1 with HCOOH/triethylamine in the presence of (R,R)-Noyori’s catalyst proceeded via classical kinetic resolution, so that the formed (?)-3b or unreacted (+)-1 could be obtained in highly enantiopure form before or beyond 50% of the substrate conversion, respectively. Alcohol 3b with an (1R_p,S)- or (1S_p,R)-configuration is not easily accessible by the diastereoselective metallation/electrophilic quenching sequence routinely applied in the synthesis of planar chiral ferrocenes. As a result, the described procedures provide a valuable access to this useful starting material for the synthesis of homochiral related derivatives.