Coordination of phosphinoboranes R2PB(C6F5)2 to platinum: an alkene-type behavior

The paucity of boron-containing heteroalkene complexes prompted us to explore the coordination of phosphinoboranes. The complexes {[R(2)PB(C(6)F(5))(2)]Pt(PPh(3))(2)} (R = Cy, t-Bu) were obtained by ethylene displacement. Spectroscopic and crystallographic data indicated symmetric side-on coordination of the phosphinoborane to Pt. Thorough analysis of the bonding situation by computational means revealed important similarities but also significant differences between the phosphinoborane and ethylene complexes.     

A cryosolution infrared study of the complexes of fluoroform with ammonia and pyridine: Evidence for a C-H...N pseudo blue-shifting hydrogen bond

Mid-infrared spectra of mixed solutions in liquid xenon containing fluoroform and either ammonia or pyridine have been investigated at temperatures between 173 and 213 K. For both Lewis bases, a new band is found in the CH stretching region at a frequency approximately 5 cm(-1) higher than that of monomer fluoroform, which is assigned to a complex between fluoroform and the Lewis base. A detailed analysis of the nu1/2nu(4) Fermi resonance in the proton donor shows that the blue shifts observed for the complexes are not caused by a strengthening of the CH bond during the complexation, but are due to the changes in the Fermi resonance interactions. Information on the nu1/2nu(4) Fermi resonance was also obtained for the complexes of fluoroform with dimethyl ether and trimethyl amine.     

Adsorption of silanes bearing nitrogenated Lewis bases on SiO2/Si (100) model surfaces

The present paper describes the one-pot procedure for the formation of self-assembled thin films of two silanes on the model oxidized silicon wafer, SiO2/Si. SiO2/Si is a model system for other surfaces, such as glass, quartz, aerosol, and silica gel. MALDI-TOF MS with and without a matrix, XPS, and AFM have confirmed the formation of self-assembled thin films of both 3-imidazolylpropyltrimethoxysilane (3-IPTS) and 4-(N-propyltriethoxysilane-imino)pyridine (4-PTSIP) on the SiO2/Si surface after 30 min. Longer adsorption times lead to the deposition of nonreacted 3-IPTS precursors and the formation of agglomerates on the 3-IPTS monolayer. The formation of 4-PTSIP self-assembled layers on SiO2/Si is also demonstrated. The present results for the flat SiO2/Si surface can lead to a better understanding of the formation of a stationary phase for affinity chromatography as well as transition-metal-supported catalysts on silica and their relationship with surface roughness and ordering. The 3-IPTS and 4-PTSIP modified SiO2/Si wafers can also be envisaged as possible built-on-silicon thin-layer chromatography (TLC) extraction devices for metal determination or N-heterocycle analytes, such as histidine and histamine, with "on-spot" MALDI-TOF MS detection.     

Triiron and Triruthenium Carbonyl Clusters Bearing Bridging Long Chain Diphosphine and Capping Chalcogenido Ligands

Treatment of Ru₃(CO)₁₂ with dpphSe₂ (dpph = 1,6-bis(diphenylphosphino)hexane) in refluxing toluene in the presence of Me₃NO afforded two new compounds, Ru₃(CO)₇(-CO)(₃-Se)(-dpph) (1) and Ru₃(CO)₇(₃-Se)₂(-dpph) (2). A similar reaction of Ru₃(CO)₁₂ with dpppeSe₂ (dpppe = 1,5-bis(diphenylphosphino)pentane) gave exclusively Ru₃(CO)₇(₃-Se)₂(-dpppe) (3). Treatment of Ru₃(CO)₁₂ with dpphS₂ and dpppeS₂ at 110°C in the presence of Me₃NO afforded Ru₃(CO)₇(₃-S)₂(-dpph) (4) and Ru₃(CO)₇(₃-S)₂(-dpppe) (5), respectively. Reactions of Fe₃(CO)₁₂ with dpphSe₂ and dpppeSe₂, under identical conditions, afforded Fe₃(CO)₇(₃-Se)₂(-dpph) (6) and Fe₃(CO)₇(₃-Se)₂(-dpppe) (7), respectively. Compounds 1–7 were characterized spectroscopically and the molecular structures of compounds 1–4 were determined by single crystal X-ray crystallography. The core of 1 contains an equilateral triangle of ruthenium atoms with one capping selenium, one bridging dpph, one doubly bridging carbonyl and seven terminal carbonyl ligands. Complexes 2–4 have a square-pyramidal structure with two metal and two chalcogenide atoms alternating in the basal plane and the third metal atom at the apex of the pyramid, and belong to the family of well-known nido clusters with seven skeletal electron pairs.     

Novel Copolymers of 4-Fluorostyrene. 11. Some Ring-substituted 1,1-dicyano-2-(1-naphthyl)ethylenes

Novel copolymers of trisubstituted ethylene monomers, ring-substituted 1,1-dicyano-2-(1-naphthyl)ethylenes, RC₁₀H₆CH?C(CN)₂ (where R is H, 2-OCH₃, 4-OCH₃) and 4-fluorostyrene were prepared by solution copolymerization in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers is (5.86) > 2-CH₃O (4.28) > 4-CH₃O (2.87). Relatively high T_g of the copolymers in comparison with that of poly(4-fluorostyrene) indicates a decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–500°C range with residue (7.3–7.7% wt.), which then decomposed in the 500–800°C range.     

Novel Copolymers of Styrene. 15. Phenoxy Ring-Substituted Methyl 2-Cyano-3-Phenyl-2-Propenoates

Electrophilic trisubstituted ethylenes, phenoxy ring-substituted methyl 2-cyano-3-phenyl-2-propenoates, RPhCH=C(CN)CO₂CH₃, where R is 4-(4-BrC₆H₅O), 2-(4-ClC₆H₅O), 3-(4-ClC₆H₅O), 4-(3-ClC₆H₅O), 4-(4-ClC₆H₅O), 4-(4-FC₆H₅O), 2-(3-CH₃OC₆H₅O), 2-(4-CH₃OC₆H₅O), 3-(4-CH₃OC₆H₅O), 4-(4-CH₃OC₆H₅O), 3-(4-CH₃C₆H₅O) were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of phenoxy ring-substituted benzaldehydes and methyl cyanoacetate, and characterized by CHN analysis, IR, ¹H and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The compositions of the copolymers were calculated from nitrogen analysis and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r₁) for the monomers is 4-(4-CH₃OC₆H₅O) (6.07) > 3-(4-ClC₆H₅O) (3.38) > 3-(4-CH₃OC₆H₅O) (2.78) > 4-(3-ClC₆H₅O) (2.77) > 2-(4-ClC₆H₅O) (2.29) > 3-(4-CH₃C₆H₅O) (1.98) > 4-(4-FC₆H₅O) (1.92) > 4-(4-ClC₆H₅O) (1.89) > 2-(3-CH₃OC₆H₅O) (1.39) > 2-(4-CH₃OC₆H₅O) (0.90) > 4-(4-BrC₆H₅O) (0.77). Relatively high T_g of the copolymers in comparison with that of polystyrene indicates a decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200-500°C range with residue (2.5-8.0% wt), which then decomposed in the 500-800°C range.     

Novel Copolymers of Styrene. 16. Halogen Ring-Disubstituted Methyl 2-Cyano-3-Phenyl-2-Propenoates

Electrophilic trisubstituted ethylenes, ring-disubstituted methyl 2-cyano-3-phenyl-2-propenoates, RPhCH?C(CN)CO₂CH₃, where R is 2,5-dichloro, 3,5-dichloro, 2,3-difluoro, 3-chloro-2-fluoro, 3-chloro-4-fluoro, 4-chloro-3-fluoro, 2-chloro-5-nitro, and 2-chloro-6-nitro were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-disubstituted benzaldehydes and methyl cyanoacetate, and characterized by CHN analysis, IR, ¹H and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The compositions of the copolymers were calculated from nitrogen analysis and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r₁) for the monomers is 4-Cl-3-F (4.87) > 2,3-F₂ (4.49) > 3-Cl-4-F (3.50) > 3-Cl-2-F (2.96) > 2-Cl-5-NO₂ (2.02) > 2,5-Cl₂ (1.54) > 2-Cl-6-NO₂ (1.00) > 3,5-Cl₂ (0.41). Relatively high T_g of the copolymers in comparison with that of polystyrene indicates a decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–500ºC range with residue (1.5–34.5% wt), which then decomposed in the 500-800ºC range.     

A molecularly imprinted polymer for the determination of neopterin

A molecularly imprinted polymer (MIP) for the specific retention of neopterin has been developed. A set of 6 polymers was prepared by radical polymerization under different experimental condition using methacrylic acid as functional monomer and ethylene glycol dimethacrylate as crosslinker, with the aim to understand their influence on the efficiency of the MIP. The performance of each MIP was tested in batch experiments via their binding capacity. The MIP prepared in the presence of nickel ions in dimethylsulfoxide-acetonitrile mixture (P4) exhibited the highest binding capacity for neopterin (260 μmol per gram of polymer). A selectivity study with two other pteridines demonstrated the polymer P4 also to possess the best selectivity.

Asymmetric Carboxycyanation of Aldehydes by Cooperative AlF/Onium Salt Catalysts: from Cyanoformate to KCN as Cyanide Source

Asymmetric 1,2-additions of cyanide yield enantioenriched cyanohydrins as versatile chiral building blocks. Next to HCN, volatile organic cyanide sources are usually used. Among them, cyanoformates are more attractive on technical scale than TMSCN for cost reasons, but catalytic productivity is usually lower. Here, the development of a new strategy for cyanations is described, in which this activity disadvantage is overcome. A Lewis acidic Al center cooperates with an aprotic onium moiety within a remarkably robust bifunctional Al–F–salen complex. This allowed for unprecedented turnover numbers of up to 10⁴. DFT studies suggest an unexpected unique trimolecular pathway in which the ammonium bound cyanide attacks the aldehyde, which itself is activated by the carbonyl group of the cyanoformate binding to the Al center. In addition, a novel practical carboxycyanation method was developed that makes use of KCN as the sole cyanide source. The use of a pyrocarbonate as carboxylating reagent provided the best results.     

Insight into industrial PLA aging process by complementary use of rheology,HPLC, and MALDI

Nowadays, there is a growing availability of biodegradable industrial materials intended to food contact applications whose service life behavior needs to be further investigated. This article is focused on the degradation of two materials based on polylactic acid. The correlation between the rate of degradation and the amount of trapped degradation products was investigated applying three characterization techniques in parallel, namely rheology, high‐performance liquid chromatography (HPLC), and matrix‐assisted laser desorption/ionization (MALDI). The rate of degradation was studied through the evaluation of their rheological properties and calculation of the number of average molecular weights, and weight‐average molecular weights. Water‐soluble oligomers and lactic acid were quantified by HPLC‐ultraviolet. Changes in cyclic and linear oligomers were monitored by MALDI‐time‐of‐flight mass spectrometry. Specimens of 4‐mm thickness of each biopolymer were subjected to hydrolysis in deionized water up to 6 months at two temperatures, simulating service conditions of food packaging. The diminution in viscosity and consequently in molecular weight distribution (20–60%) showed the degradation of the molecular structure of both polylactic acids. The chain scission was followed through the increasing values of lactic acid and hydrolyzed oligomers (twofold to eightfold), and the predominant signal of the linear oligomers over the cyclic ones with aging. Rheology, HPLC, and MALDI showed to be complementary tools to better understand the changes in the molecular structure. The obtained results showed the necessity of adding suitable stabilizers for each particular food packaging application. Copyright © 2013 John Wiley & Sons, Ltd.