Gas-phase tautomeric equilibrium of 4-hydroxypyrimidine with its ketonic forms: a free jet millimeterwave spectroscopy study

4-Hydroxypyrimidine (4HP) has two conformational forms (the hydroxyl hydrogen cis or trans with respect to the adjacent nitrogen), which are in tautomeric equilibrium with two ketonic forms, 4-pyrimidinone (4PO) and 6-pyrimidinone (6PO). We have investigated the free jet absorption millimeterwave spectrum of this system, assigning the rotational spectra of 4HPcis and 4PO; the latter species is more stable by 2.0(9) kJ/mol. No lines corresponding to the trans isomer of 4-hydroxypyridine and to 6PO have been observed.     

Quinones from plants of northeastern Brazil: structural diversity, chemical transformations, NMR data and biological activities

The present review focus in quinones found in species of Brazilian northeastern Capraria biflora, Lippia sidoides, Lippia microphylla and Tabebuia serratifolia. The review cover ethnopharmacological aspects including photography of species, chemical structure feature, NMR datea and biological properties. Chemical transformations of lapachol to form enamine derivatives and biological activities are discussed.     

Excited-state intramolecular proton transfer in 2-(3'-hydroxy-2'-pyridyl)benzoxazole. Evidence of coupled proton and charge transfer in the excited state of some o-hydroxyarylbenzazoles

The influence of solvent, temperature, and viscosity on the phototautomerization processes of a series of o-hydroxyarylbenzazoles was studied by means of ultraviolet-visible (UV-vis) absorption spectroscopy and steady-state and time-resolved fluorescence spectroscopy. The compounds studied were 2-(2'-hydroxyphenyl)benzimidazole (HBI), 2-(2'-hydroxyphenyl)benzoxazole (HBO), 2-(2'-hydroxyphenyl)benzothiazole (HBT), 2-(3'-hydroxy-2'-pyridyl)benzimidazole (HPyBI), and the new derivative 2-(3'-hydroxy-2'-pyridyl)benzoxazole (HPyBO), this one studied in neutral and acid media. All of these compounds undergo an excited-state intramolecular proton transfer (ESIPT) from the hydroxyl group to the benzazole N3 to yield an excited tautomer in syn conformation. A temperature- and viscosity-dependent radiationless deactivation of the tautomer has been detected for all compounds except HBI and HPyBI. We show that this radiationless decay also takes place for 2-(3-methyl-1,3-benzothiazol-3-ium-2-yl)benzenolate (NMeOBT), the N-methylated analog of the tautomer, whose ground-state structure has anti conformation. In ethanol, the radiationless decay shows intrinsic activation energy for HPyBO and HBO; however, it is barrierless for HBT and NMeOBT and controlled instead by the solvent dynamics. The relative efficiency of the radiationless decay in the series of molecules studied supports the hypothesis that this transition is connected with a charge-transfer process taking place in the tautomer, its efficiency being related to the strength of the electron donor (dissociated phenol or pyridinol moiety) and electron acceptor (protonated benzazole). We propose that the charge transfer is associated with a large-amplitude conformational change of the tautomer, the process leading to a nonfluorescent charge-transfer intermediate. The previous ESIPT step generates the structure with the suitable redox pair to undergo the charge-transfer process; therefore, an excited-state intramolecular coupled proton and charge transfer takes place for these compounds.     

Predicting protein disorder and induced folding: from theoretical principles to practical applications

In the last years there has been an increasing amount of experimental evidence pointing out that a large number of proteins are either fully or partially disordered (unstructured). Intrinsically disordered proteins are ubiquitary proteins that fulfil essential biological functions while lacking highly populated and uniform secondary and tertiary structure under physiological conditions. Despite the large abundance of disorder, disordered regions are still poorly detected. Recognition of disordered regions in a protein is instrumental for reducing spurious sequence similarity between disordered regions and ordered ones, and for delineating boundaries of protein domains amenable to crystallization. As presently none of the available automated methods for prediction of protein disorder can be taken as fully reliable on its own, we present a brief overview of the methods currently employed highlighting their philosophy. We show a few practical examples of how they can be combined to avoid pitfalls and to achieve more reliable predictions. We also describe the currently available methods for the identification of regions involved in induced folding and provide a few practical examples in which the accuracy of predictions was experimentally confirmed.     

One-electron versus two-electron mechanisms in the oxidative addition reactions of chloroalkanes to amido-bridged rhodium complexes

The compound syn-[{Rh(mu-NH{p-tolyl})(CNtBu)(2)}(2)] (1) oxidatively adds C--Cl bonds of alkyl chlorides (RCl) and dichloromethane to each metal centre to give the cationic complexes syn-[{Rh(mu-NH{p-tolyl})(eta(1)-R)(CNtBu)(2)}(2)(mu-Cl)]Cl and anti-[{Rh(mu-NH{p-tolyl})Cl(CNtBu)(2)}(2)(mu-CH(2))]. Reaction of 1 with the chiral alkyl chloride (-)-(S)-ClCH(Me)CO(2)Me (R*Cl) gave [{Rh(mu-NH{p-tolyl})(eta(1)-R*)(CNtBu)(2)}(2)(mu-Cl)]Cl ([3]Cl) as an equimolecular mixture of the meso form (R,S)-[3]Cl-C(s) and one enantiomer of the chiral form [3]Cl-C(2). This reaction, which takes place in two steps, was modeled step-by-step by reacting the mixed-ligand complex syn-[(cod)Rh(mu-NH{p-tolyl})(2)Rh(CNtBu)(2)] (4) with R*Cl, as a replica of the first step, to give [(cod)Rh(mu-NH{p-tolyl})(2)RhCl(eta(1)-R*)(CNtBu)(2)] (5) with racemization of the chiral carbon. Further treatment of 5 with CNtBu to give the intermediate [(CNtBu)(2)Rh(mu-NH{p-tolyl})(2)RhCl(eta(1)-R*)(CNtBu)(2)], followed by reaction with R*Cl reproduced the regioselectivity of the second step to give (R,S)-[3]Cl-C(s) and [3]Cl-C(2) in a 1:1 molar ratio. Support for an S(N)2 type of reaction with inversion of the configuration in the second step was obtained from a similar sequence of reactions of 4 with ClCH(2)CO(2)Me first, then with CNtBu, and finally with R*Cl to give [(CNtBu)(2)(eta(1)-CH(2)R)Rh(mu-NH{p-tolyl})(2)(mu-Cl)Rh(eta(1)-R*)(CNtBu)(2)]Cl (R = CO(2)Me, [7]Cl) as a single enantiomer with the R configuration at the chiral carbon. The reactions of 1 with (+)-(S)-XCH(2)CH(CH(3))CH(2)CH(3) (X = Br, I) gave the related complexes [{Rh(mu-NH{p-tolyl})(eta(1)-CH(2)CH(CH(3))CH(2)CH(3))(CNtBu)(2)}(2)(mu-X)]X, probably by following an S(N)2 profile in both steps.     

Simultaneous determination of hyoscine butylbromide and ketoprofen in pharmaceutical preparations by spectrophotometric and liquid chromatographic methods

A binary mixture of hyoscine butylbromide and ketoprofen was determined by 4 different methods. The first involved determination of hyoscine butylbromide and ketoprofen using the ratio-spectra first-derivative spectrophotometric technique at 211 and 234 nm over the concentration ranges of 2-14 and 5-45 microg/mL with mean accuracies 99.84 +/-0.92 and 99.98+/- 0.64%, respectively. The second method utilized second-derivative spectrophotometry over the concentration ranges of 2-14 and 5-35 microg/mL with mean accuracies 99.32+/- 1.06 and 99.55+/-1.15%, respectively. The third method was based on the resolution of the 2 components by bivariate calibration depending on a simple and rapid mathematical algorithm and quantitative evaluation of the absorbances at 206 and 254 nm over concentration ranges of 2-16 and 5-35 microg/mL; mean accuracies of 100.21+/-1.30 and 100.19 +/-1.07% were obtained for hyoscine butylbromide and ketoprofen, respectively. The fourth method was reversed-phase liquid chromatography using 0.05 M ammonium dihydrogen phosphate-acetonitrile-methanol (20 + 30 + 6, v/v) as the mobile phase with ultraviolet detection at 220 nm over concentration ranges of 1-90 and 5-70 microg/mL; mean accuracies were 99.92+/-1.02 and 99.61+/- 0.98%, respectively. The suggested procedures were checked using laboratory-prepared mixtures and were successfully applied for the analysis of pharmaceutical preparations. The methods retained their accuracy and precision when the standard addition technique was applied. The results obtained by applying the proposed methods were statistically analyzed and compared with those obtained by the manufacturer's method.     

Low-temperature N-O bond cleavage of nitrogen monoxide in heterometallic carbonyl complexes. An experimental and theoretical study

The reaction of Na[RuCp(CO) 2] with [MnCp'(CO) 2(NO)]BF 4 gives the corresponding heterometallic derivative [MnRuCpCp'(mu-CO) 2(CO)(NO)] (Cp = eta (5)-C 5H 5; Cp' = eta (5)-C 5H 4Me). In contrast, the group 6 metal carbonyl anions [MCp(CO) 2L] (-) (M = Mo, W; L = CO, P(OMe) 3, PPh 3) react with the Mn and Re complexes [M'Cp'(CO) 2(NO)]BF 4 to give the heterometallic derivatives [MM'CpCp'(mu-N)(CO) 3L] having a nitride ligand linearly bridging the metal centers (W-N = 1.81(3) A, N-Re = 1.97(3) A, W-N-Re = 179(1) (o), in [WReCpCp'(mu-N)(CO) 3{P(OMe) 3}]). Density-functional theory calculations on the reactions of [WCp(CO) 3] (-) and [RuCp(CO) 2] (-) with [MnCp(CO) 2(NO)] (+) revealed a comparable qualitative behavior. Thus, two similar and thermodynamically allowed reaction pathways were found in each case, one implying the displacement of CO from the cation and formation of a metal-metal bond, the other implying the cleavage of the N-O bond of the nitrosyl ligand and release of a carbonyl from the anion as CO 2. The second pathway is more exoergonic and is initiated through an orbitally controlled attack of the anion on the N atom of the NO ligand in the cation. In contrast, the first pathway is initiated through a charge-controlled attack of the anion to the C atom of a CO ligand in the cation. The CO 2-elimination pathway requires at the intermediate stages a close approach of the NO and CO ligands, which is more difficult for the Ru compound because of its lower coordination number (compared to W). This effect, when combined with a stronger stabilization of the initial intermediate in the Ru reaction, makes the CO 2-elimination pathway slower in that case.     

Trinuclear Mo3S7 clusters coordinated to dithiolate or diselenolate ligands and their use in the preparation of magnetic single component molecular conductors

A general route for the preparation of a series of dianionic Mo3S7 cluster complexes bearing dithiolate or diselenolate ligands, namely, [Mo3S7L3](2-) (where L = tfd (bis(trifluoromethyl)-1,2-dithiolate) (4(2-)), bdt (1,2-benzenedithiolate) (5(2-)), dmid (1,3-dithia-2-one-4,5-dithiolate) (6(2-)), and dsit (1,3-dithia-2-thione-4,5-diselenolate) (7(2-))) is reported by direct reaction of [Mo3S7Br6](2-) and (n-Bu)2Sn(dithiolate). The redox properties, molecular structure, and electronic structure (BP86/VTZP) of the 4(2-) to 7(2-) clusters have also been investigated. The HOMO orbital in all complexes is delocalized over the ligand and the Mo3S7 cluster core. Ligand contributions to the HOMO range from 61.67% for 4(2-) to 82.07% for 7(2-), which would allow fine-tuning of the electronic and magnetic properties. These dianionic clusters present small energy gaps between the HOMO and HOMO-1 orbitals (0.277-0.104 eV). Complexes 6(2-) and 7(2-) are oxidized to the neutral state to afford microcrystalline or amorphous fine powders that exhibit semiconducting behavior and present antiferromagnetic exchange interactions. These compounds are new examples of the still rare single-component conductors based on cluster magnetic units.     

Microwave-assisted synthesis of 1,5-dioxo-3-substituted [5]ferrocenophanes

The Claisen-Schmidt reaction between 1,1′-diacetylferrocene and ferrocenecarboxaldehyde under microwave irradiation has been investigated in different conditions. The selective synthesis of 1,5-dioxo-3-ferrocenyl[5]ferrocenophane has been achieved and a simple protocol for its purification was established. The reaction was generally applicable to other non-enolizable aldehydes and the corresponding 1,5-dioxo-3-substituted [5]ferrocenophanes were obtained in high yield within 30 min.