In situ infrared study of SBA-15 functionalized with carboxylic groups incorporated by a co-condensation route

Two samples of SBA-15 mesoporous silica with a different content of carboxylic groups (-COOH) were prepared by a co-condensation route, using 4-(triethoxysilil)butyronitrile as the organosilane agent, then treating the samples with sulfuric acid, which removes the template and simultaneously hydrolyses the -CN to -COOH groups, as shown by IR spectroscopy. Both incorporation of organosilane agents and subsequent acid treatment do not affect the ordered SBA-15 structure. The proton-donor ability of carboxylic groups, as well their accessibility to reactants, has been studied in the IR by dosing ammonia, which forms reversibly COO- groups and NH4+ ions. The related equilibrium constants have been determined by elaboration of IR data. Outgassing the samples at progressively increasing temperatures destabilizes to an increasing extent the ammonium/carboxylate ion pair, because of the decrease in surface polarity brought about by dehydration: this decreases the related equilibrium constants. The amount of carboxylic groups undergoing reaction appears instead to be constant with dehydration, and to coincide with the whole population of COOH groups. Titration with alkali solutions yielded surface concentrations for the two samples of ca. 1.0 and 0.45 COOH/nm2. Proportionality between the surface concentrations and the intensities of the C=O IR band is observed: this suggests that COOH groups are noninteracting with each other and allows the computation of the related extinction molar coefficient.     

Use of electrospray mass spectrometry (ESI-MS) for the study of europium(III) complexation with bis(dialkyltriazinyl)pyridines and its implications in the design of new extracting agents

ESI mass spectrometry was used to investigate the europium complexation by tridentate ligands L identical with 2,6-bis(5,6-dialkyl-1,2,4-triazin-3-yl)-pyridines (DATP) that have shown unique separation properties of actinides(III) from lanthanides(III) in nitric acid solutions. Complexes of three ligands, namely methyl (DMTP), n-propyl (DnPTP), and iso-propyl (DiPTP), have been investigated in acidic solutions to check the aqueous-phase stability of Eu(L)(3)(3+) ions identified previously in the solid state. The data obtained show, first, the presence of stable Eu(L)(3)(3+) ions with DnPTP (log beta(3)(app) = 12.0 +/- 0.5) and DiPTP (log beta(3)(app) = 14.0 +/- 0.6) in methanol/water (1:1 v/v) solutions under pH range 2.8-4.6 and, second, a mechanism whereby alkyl moieties contribute to a self-assembling process leading to the formation of Eu(L)(3)(3+) ions. Other complexes such as Eu(L)(2)(3+) ions are only observed for DnPTP (log beta(2)(app) = 6.7 +/- 0.5) and DMTP (log beta(2)(app) = 6.3 +/- 0.1) and Eu(L)(3+) only for DMTP (log beta(1)(app) = 2.9 +/- 0.2). The log beta(n)(app) values for the Eu(L)(n)(3+) (n = 1-3) complexes were determined at pH 2.8. Better insight was given in this study concerning the role of the hydrophobic exterior of the ligands for the design of a new range of extracting agents.     

CH...O and CH...F links form the cage structure of dioxane-trifluoromethane

The molecular beam Fourier transform microwave spectrum of 1,4-dioxane-trifluoromethane has been assigned and measured. The two subunits form a cage stabilized by one C-H...O and two C-H...F weak hydrogen bonds. The C-H...O link involves the axial lone pair of one of the two equivalent ring oxygens, while the two C-H...F bridges connect trifluoromethane to the two axial hydrogens in positions 3 and 5. The dissociation energy has been estimated from the D(J) centrifugal distortion parameter to be approximately 6.8 kJ/mol.     

Triiron and Triruthenium Carbonyl Clusters Bearing Bridging Long Chain Diphosphine and Capping Chalcogenido Ligands

Treatment of Ru₃(CO)₁₂ with dpphSe₂ (dpph = 1,6-bis(diphenylphosphino)hexane) in refluxing toluene in the presence of Me₃NO afforded two new compounds, Ru₃(CO)₇(-CO)(₃-Se)(-dpph) (1) and Ru₃(CO)₇(₃-Se)₂(-dpph) (2). A similar reaction of Ru₃(CO)₁₂ with dpppeSe₂ (dpppe = 1,5-bis(diphenylphosphino)pentane) gave exclusively Ru₃(CO)₇(₃-Se)₂(-dpppe) (3). Treatment of Ru₃(CO)₁₂ with dpphS₂ and dpppeS₂ at 110°C in the presence of Me₃NO afforded Ru₃(CO)₇(₃-S)₂(-dpph) (4) and Ru₃(CO)₇(₃-S)₂(-dpppe) (5), respectively. Reactions of Fe₃(CO)₁₂ with dpphSe₂ and dpppeSe₂, under identical conditions, afforded Fe₃(CO)₇(₃-Se)₂(-dpph) (6) and Fe₃(CO)₇(₃-Se)₂(-dpppe) (7), respectively. Compounds 1–7 were characterized spectroscopically and the molecular structures of compounds 1–4 were determined by single crystal X-ray crystallography. The core of 1 contains an equilateral triangle of ruthenium atoms with one capping selenium, one bridging dpph, one doubly bridging carbonyl and seven terminal carbonyl ligands. Complexes 2–4 have a square-pyramidal structure with two metal and two chalcogenide atoms alternating in the basal plane and the third metal atom at the apex of the pyramid, and belong to the family of well-known nido clusters with seven skeletal electron pairs.     

Coelectroosmotic capillary electrophoresis of phenolic acids and derivatized amino acids using N,N-dimethylacrylamide-ethylpyrrolidine methacrylate physically coated capillaries

Two different families of compounds, i.e., phenolic and amino acids have been separated by capillary electrophoresis using a physically adsorbed polymer as capillary coating. The polymer used was N,N-dimethylacrylamide-ethylpyrrolidine methacrylate (DMA-EpyM) and it provided an stable coating by only flushing the capillary with a DMA-EpyM aqueous solution for 2 min between runs. The usefulness of this procedure has been demonstrated through the fast analysis of different families of solutes. Two different detection systems, diode-array detector and laser-induced fluorescence, have been used to determine phenolic acids and derivatized amino acids with fluorescein isothiocyanate, respectively. The main factors affecting reversal of electroosmotic flow (EOF) such as pH, type and concentration of buffer, and concentration and influence of organic solvents, as well as all the instrumental conditions were studied and optimized for both families of compounds.     

PHOTODYNAMIC DAMAGE TO EGG LECITHIN LIPOSOMES*

Abstract— Egg lecithin liposomes were lysed by singlet oxygen (¹O*₂) generated by red light irradiation of oxygenated methylene blue (MB⁺) and by superoxide (O^?₂) generated by blue-green irradiation of oxygenated riboflavin (RF) in the presence of ethylenediaminetetraacetic acid (EDTA) or reduced nicotinamide adenine dinucleotide (NADH). The MB⁺/O₂ sensitized process is more efficient in alkaline solutions, attributed to the stabilization of the triplet state di-cation. The small increase of the lysis efficiency from pH4 to pH9 for the RF/EDTA/O₂ system suggests that HO^?₂ may be more damaging than O^?₂. Estimates based on large-target reaction kinetics indicate that ¹O*₂ is about 200 times more effective than superoxide for inducing liposome lysis. Similar experiments with saturated 1 -α-phosphatidylcholine dipalmitoyl liposomes showed no photosensitized lysis for either system.     

Oxidative additions of alkynyl/vinyl iodides to gold and gold-catalyzed vinylation reactions triggered by the MeDalphos ligand

The hemilabile Ad₂P(o-C₆H₄)NMe₂ ligand promotes fast, quantitative and irreversible oxidative addition of alkynyl and vinyl iodides to gold. The reaction is general. It works with a broad range of substrates of various electronic bias and steric demand, and proceeds with complete retention of stereochemistry from Z and E vinyl iodides. Both alkynyl and vinyl iodides react faster than aryl iodides. The elementary step is amenable to catalysis. Oxidative addition of vinyl iodides to gold and π-activation of alkenols (and N-alkenyl amines) at gold have been combined to achieve hetero-vinylation reactions. A number of functionalized heterocycles, i.e. tetrahydrofuranes, tetrahydropyranes, oxepanes and pyrrolidines were obtained thereby (24 examples, 87% average yield). Taking advantage of the chemoselectivity for vinyl iodides over aryl iodides, sequential transformations involving first a hetero-vinylation step and then a C–N coupling, a C–C coupling or an heteroarylation were achieved from a vinyl/aryl bis-iodide substrate.

The hemilabile Ad₂P(o-C₆H₄)NMe₂ ligand promotes fast, quantitative and irreversible oxidative addition of alkynyl and vinyl iodides to gold.     

A systematic study of bovine serum albumin (BSA) and sodium dodecyl sulfate (SDS) interactions by surface tension and small angle X-ray scattering

Classical parameters obtained from surface tension technique coupled to small angle X-ray scattering (SAXS) measurements gave support to investigate conformational changes in the bovine serum albumin (BSA)-sodium dodecyl sulfate (SDS) complexes, as well as the size of the micelle-like clusters distributed along the polypeptide chain. The studied systems were composed of 1 wt% of BSA in the absence and presence of increasing SDS molar concentration up to 80 mM, under experimental conditions of low ionic strength and pH 5.40. At SDS concentrations below the critical aggregation concentration (cac) of 2.2 mM, SAXS results indicate that the detergent does not modify the native protein conformation. However, the beginning of protein unfolding, evidenced by SAXS through an increase in the values of radius of gyration Rg and protein maximum dimension Dmax, is coincident with the onset of SDS cooperative binding to BSA identified by the first breakpoint in the surface tension-SDS profile. Further SDS addition leads to the formation of micelle-like aggregates randomly distributed along the unfolded polypeptide chain, consistent to a necklace and bead model. The SAXS data also demonstrate that the SDS micelles grow in size up to 50 mM detergent. At 50 mM surfactant, the micelles stop growing. This concentration is near the BSA saturation binding by SDS measured by dialyzes and indicated by the second breakpoint in surface tension-SDS profile. The SAXS and surface tension data are also consistent with the formation of free micelles in equilibrium with BSA-SDS complexes for surfactant amount above the saturation.     

Investigation on corrosion inhibition and adsorption mechanism of azomethine derivatives at mild steel/0.5 ​M ​H2SO4 solution interface: Gravimetric,electrochemical, SEM and EDX studies

The inhibition performance of five azomethine derivatives such as: 1-(4-Methyloxy phenylimino)-1-(phenylhydrazono)-propan-2-one (SB₁), 1-(4-Methylphenylimino)-1-(phenylhydrazono) propan-2-one (SB₂), 1-(phenylimino)-1(phenylhydrazono)-propan-2-one (SB₃), 1-(4-Bromo phenylimino)-1(phenylhydrazono)-propan-2-one (SB₄) and 1-(4-Chlorophenylimino)-1(phenylhydrazono) -propan-2-on (SB₅) as corrosion inhibitors for mild steel in sulfuric acid 0.5 ?M were investigated using different methods. All experimental results demonstrate that these compounds are eficients inhibitors. The inhibition efficiencies ($IE$) increase with inhibitors concentration. At 7.5 $\times$ 10^?5 ?M, the $IE$ was 97.27%, 96.31%, 94.23%, 93.19 and 91.64% for SB₁, SB₂, SB₃, SB₄ and SB₅, respectively. The potentiodynamic polarization results indicated that all the studied inhibitors act as mixed type. The adsorption process on mild steel surface obeyed Langmuir isotherm. The associated activation parameters and thermodynamic have been calculated and discussed. The adsorbed film formed on the metal surface was characterized by SEM and EDX.     

Modeling of submicrometer aerosol penetration through sintered granular membrane filters

We present a deep-bed aerosol filtration model that can be used to estimate the efficiency of sintered granular membrane filters in the region of the most penetrating particle size. In this region the capture of submicrometer aerosols, much smaller than the filter pore size, takes place mainly via Brownian diffusion and direct interception acting in synergy. By modeling the disordered sintered grain packing of such filters as a simple cubic lattice, and mapping the corresponding 3D connected pore volume onto a discrete cylindrical pore network, the efficiency of a granular filter can be estimated, using new analytical results for the efficiency of cylindrical pores. This model for aerosol penetration in sintered granular filters includes flow slip and the kinetics of particle capture by the pore surface. With a unique choice for two parameters, namely the structural tortuosity and effective kinetic coefficient of particle adsorption, this semiempirical model can account for the experimental efficiency of a new class of "high-efficiency particulate air" ceramic membrane filters as a function of particle size over a wide range of filter thickness and texture (pore size and porosity) and operating conditions (face velocity).