Heteronuclear Multiple-Quantum Coherence NMR Spectroscopy of Im-cyt C

Some ¹³C chemical shifts of the CH_n groups in the aliphatic side chains of Im-cyt c have been determined for the first time based on the H chemical shifts of their attached protons with the aid of heteronuclear multiple-quantum coherence (HMQC) spectroscopy. Comparison of chemical shifts of these specifically assigned ¹³C and H resonances from Im-cyt c with those from cyt c indicates that ¹³C-NMR spectra may provide an opportunity to probe the electronic structure and conformational changes induced by axial ligand substitution.     

Surface-enhanced Raman scattering effect of gold nanoparticle arrays: The influence of annealing temperature,excitation power and array thickness

Gold nanoparticle arrays are fabricated for surface-enhanced Raman scattering (SERS) and the effect of the annealing temperature, the thickness of nanoparticle array and the exciting power on the SERS signals are investigated. The particle distribution and particle size are dense and uniform on the glass substrate when the 10 nm gold film was annealed at 250 °C and strong SERS signals for Rhodamine 6G were achieved via a 532 nm excitation with a 10 mW power. The SERS signal at 1650 cm⁻¹ is enhanced more than 10 times as compared to that of the gold film without annealing. The strong SERS behavior of gold nanoparticle arrays may broaden the SERS applications in biomedical and analytical chemistry.     

Magnetic properties in zinc-blende CdS induced by Cd vacancies

The magnetic property induced by neutral Cd and S vacancies in CdS bulk and thin film are investigated, using first principles simulation. For bulk CdS, the magnetism originates from Cd, instead of S, vacancies. The ferromagnetism with a Curie temperature above room temperature can be expected. For CdS thin film, both Cd and S vacancies does not yield any magnetism at the (111) surface, while local magnetic moments at the outermost S plane of the (001) surface is ascribed to the surface effect. The ferromagnetism at S-terminated (001) surface can account for the experimental observation.     

一种裕量最大的高速载波比特功率分配算法

在国家电网公司Q/GDW 1379.4-2013技术规范对智能电能表载波通信单元功率消耗的限定要求下,为保障低压远程电力集抄台区本地通信链路的传输速率稳定可靠,给智能用电实时交互平台提供带宽支持,提出了一种裕量最大的高速载波比特功率分配算法。该算法以兼并窄带载波和宽带载波优势的G3-PLC技术为应用对象,使用约束注水法限定各子载波的传输比特数,根据时变的电力信道增益自适应调整比特功率分配方案,并响应通信服务质量QoS对系统误码率和目标传输速率的要求,结合信噪比门限算法对约束注水法进行界定和优化,得到了功率裕量最大化的表达式。仿真结果表明：提出的算法优于低反馈开销算法,能够适应低压电力线信道。在系统目标传输速率为200kbps时,达到了最大裕量值20,极大程度地降低了通信单元调制解调芯片实际的功率消耗。     

Spectroscopic Measurement in 9He and 12Be

Spectroscopy for neutron-rich nuclei ⁹He and ¹²Be has been performed by means of heavy-ion double charge exchange (HIDCX) (¹⁸O, ¹⁸Ne) reaction on stable target nuclei ⁹Be and ¹²C, respectively. Several clear peaks in ¹²Be at low excitation energy region even above neutron separation energy have been observed in one-shot measurement, whereas no prominent signals of ⁹He have been observed owing to the small cross section. It is shown that the HIDCX reaction is a new powerful spectroscopic tool for study of unstable neutron-rich nuclei.     

分散剂对YAG粉末形貌和性能的影响

以硝酸铝［Al(NO3)39H2O］和硝酸钇［Y(NO3)36H2O］为原料,碳酸氢铵［NH4HCO3］为沉淀剂,PEG400,PEG800和PEG1000等为分散剂,采用正向共沉淀法合成了钇铝石榴石（YAG）前驱体粉末。并用X射线衍射仪（XRD）、扫描电子显微镜（SEM）、粒度测试仪等分析了粉末的形貌和性能。结果表明,分散剂的加入,减少了粉末的团聚现象,而且由PEG400,PEG800分散剂制备的先驱体粉末经1200 ℃煅烧60 min后均能形成纯度较高的YAG相,但PEG1000样品粒度更细,比表面积为1748.78 m2/kg,中位径为1.42 m,而前者所得粉末的比表面积分别为29.39和128.60 m2/kg,中位径分别为196.14和20.55 m。     

CO2置换CH4水合物实验研究进展

全面总结了目前CO2置换CH4水合物中CH4实验研究进展。首先从水合物结构角度出发讨论置换的可能性及置换效率;而后分别从热力学和动力学角度探讨置换反应机理;最后设计并优化了实验系统。作者认为探明置换内在机理是未来置换法开采水合物能源技术发展的关键。     

非球形烟尘粒子后向散射场的光谱分析

在利用后向散射法测量烟尘浓度和粒径的过程中,对烟尘粒子模型的后向散射光谱特性进了计算,确定影响后向散射光谱强度的主要因素并进行分析。对实际排放的烟尘进行显微观察表明,利用椭球、圆柱和广义切比雪夫3种非球模型可以较好地模拟烟尘粒子,其等效直径约1μm。通过T矩阵法对这3种非球形粒子模型后向散射场的光谱特性进行了分析,结果表明:非球形粒子的可见/红外波段后向散射现象较球形粒子明显,特别是广义切比雪夫粒子的后向散射光强最高可达到前向的3.5倍;对于吸收性非球形粒子(复折射率m=1.57-0.56i),后向散射光强远大于非吸收性非球形粒子(复折射率m=1.57-0.001i);随着粒子等效半径的增大,光源波长也应随之增加。这为在实际测量时光源及方位的选择提供了理论依据。