脉冲激光沉积法制备高温压电薄膜0.20 BiInO$lt;sub$gt;3$lt;/sub$gt;-0.80PbTiO$lt;sub$gt;3$lt;/sub$gt;$lt;strong$gt;$lt;font color="#ff0000"$gt;$lt;font color="#ff0000"$gt;（已撤稿）$lt;/font$gt;$lt;/font$gt;$lt;/strong$gt;

采用脉冲激光沉积法制备了0.20BiInO₃-0.80PbTiO₃（20BI-PT）高温压电薄膜,并与0.15BiInO₃-0.85PbTiO₃（15BI-PT）样品进行了比较研究. X射线衍射谱显示,20BI-PT样品100峰出现了明显的劈裂,显示样品具有更高的四方对称性. FESEM图显示,20BI-PT样品中出现了部分111取向的三角形晶粒. 20BI-PT样品的铁电剩余极化（P_r）为～28 μC/cm²,矫顽场（E_c）为～120 kV/cm,相较15BI-PT样品,P_r略有增加,但同时E_c也有增加. 20BI-PT样品的横向压电系数（e_31,f）约为–4.7±0.6 C/m²,和15BI-PT相比几乎一样. 介电温度谱显示,20BI-PT 样品的居里温度比15BI-PT增加了约30 ℃,达590 ℃,且介电峰没有明显的频率依赖性. Rayleigh分析显示,20BI-PT样品中内在本征因素及可翻转畴对介电非线性的贡献和15BI-PT基本相同,但是外在因素的贡献没有15BI-PT的贡献大,这可能和20BI-PT样品中晶粒111相对取向率较高有关. 关键词： 薄膜 脉冲激光沉积 铁电 压电     

Improvement of all-optical switching performance based on azo dye-doped polymer film using two cross-linearly polarized pump beams

We propose a method for improving the characteristics of all-optical switching based on azo dye-doped polymers. Using alternately two cross-linearly polarized beams (532 nm, continuous light wave (CW)) to pump azo dye–ethyl red (ER) doped polymer methyl methacrylate (PMMA) film, the modulation depth of the all-optical switching reached 96% at the pump powers of 4.8 mW and 1.6 mW and the modulation frequency of 1000 Hz. For comparison, we used respectively the single linearly polarized beam (4.8 mW) and the alternately linear–circular polarized beams (4.8 mW and 1.6 mW) to pump the film at the modulation frequency of 1000 Hz, the obtained modulation depths of the all-optical switching were 36% and 45.8%, respectively. Furthermore, the experimental measurement and analysis showed that the turn off speed of the all-optical switching could be obviously increased by use of our pump method.     

Development of plasma pyrolysis/gasification systems for energy efficient and environmentally sound waste disposal

As more efficient and reliable torches for thermal plasma generation have become available in recent years, the use of thermal plasma as an energy source for pyrolysis/gasification has attracted much interest, and special attention has been paid to waste treatment for resource and energy recovery. Plasma pyrolysis/gasification systems have unique features such as the extremely high reaction temperature and ultra-fast reaction velocity compared to traditional pyrolysis/gasification systems. Plasma pyrolysis/gasification is therefore acknowledged as a novel pyrolysis/gasification technology with great potential in solid waste disposal. This paper gives a comprehensive review on the development of fundamental researches on plasma pyrolysis/gasification systems including direct current (DC) arc plasma system and radio frequency (RF) plasma system with an emphasis on reactor design such as plasma fixed/moving bed reactor system, plasma entrained-flow bed reactor system and plasma spout-fluid bed reactor system.     

Multi-environment probability density function method for modelling turbulent combustion using realistic chemical kinetics

A computational fluid dynamics (CFD) tool for performing turbulent combustion simulations that require finite-rate chemistry is developed and tested by modelling a series of bluff-body stabilized flames that exhibit different levels of finite-rate chemistry effects ranging from near equilibrium to near global extinction. The new modelling tool is based on the multi-environment probability density function (MEPDF) methodology and combines the following: the direct quadrature method of moments (DQMOM); the interaction-by-exchange-with-the-mean (IEM) mixing model; and realistic combustion chemistry. Using DQMOM, the MEPDF model can be derived from the transport PDF equation by depicting the joint composition PDF as a weighted summation of a finite number of multi-dimensional Dirac delta functions in the composition space. The MEPDF method with multiple reactive scalars retains the unique property of the joint PDF method of treating chemical reactions exactly. However, unlike the joint PDF methods that typically must resort to particle-based Monte-Carlo solution schemes, the MEPDF equations (i.e. the transport equations of the weighted delta-peaks) can be solved by traditional Eulerian grid-based techniques. In the current study, a pseudo time-splitting scheme is adopted to solve the MEPDF equations; the reaction source terms are computed with a highly efficient and accurate in-situ adaptive tabulation (ISAT) algorithm. A 19-species reduced mechanism based on quasi-steady state assumptions is used in the simulations of the bluff-body flames. The modelling results are compared with the experimental data, including mixing, temperature, major species and important minor species such as CO and NO. Compared with simulations using a Monte-Carlo joint PDF method, the new approach shows comparable accuracy.     

Heavy ion irradiation-induced phase transformation in polycrystalline Dy2O3

Radiation damage effects in polycrystalline pellets of the rare earth sesquioxide Dy₂O₃ irradiated with 300?keV Kr²⁺ ions were studied by combining grazing incidence X-ray diffraction (GIXRD) with transmission electron microscopy (TEM). Radiation damage was introduced using 300?keV Kr²⁺ ions to fluences up to 1?×?10²⁰?Kr?m^?2 at cryogenic temperature. GIXRD and cross-sectional TEM observations revealed that the crystal structure of the irradiated Dy₂O₃ transformed from a cubic, so-called C-type rare earth sesquioxide structure to a monoclinic, B-type rare earth sesquioxide structure upon ion irradiation. In addition, TEM and high-resolution electron microscopy (HREM) indicated that the transformed surface Dy₂O₃ layer adopts an epitaxial orientation relationship with the substrate Dy₂O₃.     

Analysis of polished polycrystalline diamond using dual beam focused ion beam microscopy

This paper presents a study on polycrystalline diamond (PCD) polished by dynamic friction polishing (DFP) with the aid of advanced dual beam FIB (focused ion beam) microscopy. After disclosing a variety of wear tracks by DFP using electron imaging in combination with the ion channelling effect, a dual beam FIB was successfully employed at wear track sites to specifically create both the large cross-sectional specimen for microanalysis and thin foil for nanoanalysis. The study concluded that the polished PCD subsurface was free from microscale cracking. However, the attached debris layer on the top surface contained metal oxides and non-diamond carbon phase with inhomogeneous distributions of C, Fe, Cr, Ni, Si and O across the layer. An attached layer directly above a diamond grain was composed of essentially amorphous carbon, suggesting that a direct phase transformation from diamond crystalline to amorphous occurred during DFP.     

Microplasma Technology and Its Applications in Analytical Chemistry

Abstract

This review article describes some existing microplasma sources and their applications in analytical chemistry. These microplasmas mainly include direct current glow discharge (DC), microhollow-cathode discharge (MHCD) or microstructure electrode (MSE), dielectric barrier discharge (DBD), capacitively coupled microplasmas (CCμPs), miniature inductively coupled plasmas (mICPs), and microwave-induced plasmas (MIPs). The historical development and recent advances in these microplasma techniques are presented. Fundamental properties of the microplasmas, the unique features of the reduced size and volume, as well as the advantageous device structures for chemical analysis are discussed in detail, with the emphasis toward detection of gaseous samples. The analytical figures of merit obtained using these microplasmas as molecular/elemental-selective detectors for emission spectrometry and as ionization sources for mass spectrometry are also given in this review article.     

Preparation and characterization of vinyltriethoxysilane based inorganic–organic gel glasses dispersed 4′-n-pentyl-4-cyanobiphenyl nematic liquid crystal

Vinyltriethoxysilane based inorganic–organic glasses dispersed with 4′-n-pentyl-4-cyanobiphenyl nematic liquid crystal are designed to fabricate a new type of gel glass dispersed with liquid crystal. Scanning electron microscopy shows that the nematic liquid crystal phase, occupying the interconnected cavities, is continuously embedded in the inorganic–organic matrixes. The effect of the nematic liquid crystal weight concentration on the morphology is investigated. The differential scanning calorimetry shows that the nematic-isotropic transition temperature depends on the nematic liquid crystal weight concentration. The Raman spectra show that there are no obvious Raman frequency shifts, compared with pure nematic liquid crystal. The in situ diffuse reflectance FTIR spectra show that the integral intensity of bands of hydroxyls has not varied.     

服装主观热感觉的统计分析

本文用多因子方差分析模型和多重比较分析了服装穿着时的主观热感觉与服装品种、环境条件、穿着者的活动状态与籍贯之间的关系。通过主成分回归建立了用生理指标预测主观热感觉的模型，从而得出一种定量地评价服装属性的方法。     

正交试验设计在麦白霉素高产菌株选育中的应用

本文应用正交试验设计改进了麦白霉素的生产工艺，在四个关键环节上选出了比对照组高出７００μ／ｍｌ以上的高产稳定菌株。该法使试验次数减少，选育周期缩短，既节省了人力物力和降低了生产成本，又增加了麦白霉素药粉的产量，取得了可观的经济效益。