Growth and optical properties of a new self-Q-switched laser crystal: Cr:Yb3Al5O12

Cr⁴⁺:YbAG (Cr⁴⁺:Yb₃Al₅O₁₂) crystal with a size up to Φ24 mm×30 mm was grown by the Czochralski method. In the absorption spectrum, there are two absorption bands at 939 and 969 nm, respectively, which are suitable for InGaAs diode laser pumping, and there is an absorption band at 1030 nm, which is suitable for passive Q-switched laser output at 1.03 μm. A broad emission spectrum from 970 to 1100 nm was exhibited from 940 nm wavelength pumping. This crystal is promising as a self-Q-switched laser crystal used for compact, efficient, highly stable, passive self-Q-switched thin chip solid-state lasers.     

Broadband Light Source for Wavelength-Division Multiple Access Passive Optical Network

We demonstrated a unified two-band broadband light source based on erbium-doped fiber. The proposed scheme generates high output power at both bands and saves doped-fiber and pump lasers.     

技术不确定环境下新产品策略的设计应用

技术的动态发展和企业间的竞争对企业新产品策略有很大影响,直接决定新产品的引进周期。本文在产业技术动态变化的随机环境下构建随机动态规划模型,关注产业技术进步、投资成本和产品市场竞争等影响因素,探讨企业进行新产品引进的周期选择,对新产品引进的周期和质量决策进行方法设计和应用举例。利用随机动态规划模型得出新产品引进的最优时间周期,用算例分析技术进步和产品研发成本对企业引进周期策略的影响,采取策略迭代的方法进行求解,发现技术进步较快时企业的新产品引进步伐也较快,研发成本的提高使企业的新产品引入步伐降低。     

Spatial decay in a double diffusive convection problem in Darcy flow

This paper deals with a model of time-dependent double diffusive convection in Darcy flow. In particular it is concerned with the spatial decay of solutions when the flow is confined to a semi-infinite cylinder. Decay bounds for an energy expression are derived.     

On Donaldson’s flow of surfaces in a hyperkähler four-manifold

We prove some basic properties of Donaldson’s flow of surfaces in a hyperkähler 4-manifold. When the initial submanifold is symplectic with respect to one Kähler form and Lagrangian with respect to another, we show that certain kinds of singularities cannot form, and we prove a convergence result under a condition related to one considered by M.-T. Wang for the mean curvature flow.     

Approximation of signals from local averages

This work is concerned with approximation of a signal from local averages. It improves a result of Butzer and Lei [P.L. Butzer, J. Lei, Approximation of signals using measured sampled values and error analysis, Commun. Appl. Anal. 4 (2000) 245–255].     

Fabrication of magnetic composite nanofibers of poly(ε-caprolactone) with FePt nanoparticles by coaxial electrospinning

In this article, composite nanofibers of poly(ε-caprolactone) (PCL) with iron–platinum (FePt) nanoparticles were successfully fabricated via coaxial electrospinning. The structure and morphology of FePt/PCL composite nanofibers were observed using transmission electron microscope and scanning electron microscope, respectively. The magnetic behavior of FePt/PCL composite nanofibers was investigated by alternating gradient magnetometer at room temperature.     

Nanoparticle composites: FePt with wide-band-gap semiconductor

We present a simple way to synthesize FePt and ZnO (wide-band-gap semiconductor) nanoparticle composites. The FePt nanoparticles were fabricated using the method reported by Sun et al. By controlling the heating rate, 3 nm FePt nanoparticles were synthesized. Well-dispersed FePt and ZnO nanoparticle composites were prepared by further adding zinc acetate and oleyl amine into the 3 nm FePt nanoparticle dispersion. By controlling the molar ratio of the FePt and zinc acetate, FePt and ZnO nanoparticle composites with different FePt particle fractions were obtained. The intensity of photo luminescence spectra of the nanoparticle composites increases very much with decreasing FePt particle fraction, whereas the peak position shifts a little. After annealing at 550 °C for half an hour, the nanoparticle composites become magnetically hard or semi-hard with coercivity much dependent on the FePt particle volume fraction. The coercivity of the composites increases with annealing temperature. The composites hold the promise of applications in new generation recording and/or optical devices.     

First-Principles Study on the Electronic Structures for Y^3＋：PbWO4 Crystals

The possible defect models of Y^3＋：PbWO4 crystals are discussed by defect chemistry and the most possible substituting positions of the impurity Y^3＋ ions are studied by using the general utility lattice program （GULP）. The calculated results indicate that in the lightly doped Y^3＋ ：PWO crystal, the main compensating mechanism is [2Ypb^＋ ＋ VPb^2-], and in the heavily doped Y^3＋ ：PWO crystal, it will bring interstitial oxygen ions to compensate the positive electricity caused by YPb^＋, forming defect clusters of [2Ypb^＋ ＋Oi^2-] in the crystal. The electronic structures of Y3＋ ：PWO with different defect models are calculated using the DV-Xα method. It can be concluded from the electronic structures that, for lightly doped cases, the energy gap of the crystal would be broadened and the 420nm absorption band will be restricted; for heavily doped cases, because of the existence of interstitial oxygen ions, it can bring a new absorption band and reduce the radiation hardness of the crystal.     

Damage analysis of tetragonal perovskite structure ceramics implicated by asymptotic field solutions and boundary conditions

Cracking of ceramics with tetragonal perovskite grain structure is known to appear at different sites and scale level. The multiscale character of damage depends on the combined effects of electromechanical coupling, prevailing physical parameters and boundary conditions. These detail features are exhibited by application of the energy density criterion with judicious use of the mode I asymptotic and full field solution in the range of r/a=10⁻⁴ to 10⁻² where r and a are, respectively, the distance to the crack tip and half crack length. Very close to the stationary crack tip, bifurcation is predicted resembling the dislocation emission behavior invoked in the molecular dynamics model. At the macroscopic scale, crack growth is predicted to occur straight ahead with two yield zones to the sides. A multiscale feature of crack tip damage is provided for the first time. Numerical values of the relative distances and bifurcation angles are reported for the PZT-4 ceramic subjected to different electric field to applied stress ratio and boundary conditions that consist of the specification of electric field/mechanical stress, electric displacement/mechanical strain, and mixed conditions. To be emphasized is that the multiscale character of damage in piezoceramics does not appear in general. It occurs only for specific combinations of the external and internal field parameters, elastic/piezoelectric/dielectric constants and specified boundary conditions.