垂直加热管外自由降膜流的破断特性

在较宽液膜雷诺数和进口温度范围内对垂直加热管外自由降膜流破断特性进行了实验研究。应用热物理学相似分析的方法整理实验数据，给出新的破断准则数综合关系式，并与１９９３年发表的另一些作者的结果作了比较。实验参数的变化范围如下：ｔｉｎ＝２０～９０℃，最大液膜雷诺数Ｒｅ为１．２１×１０４，最大热流密度达１．３９×１０５ｗ／ｍ２。     

对相干态与两个原子的相互作用过程中原子与场的动力学特性

研究了对相干态(paircoherentstate)与两个二能级原子的相互作用过程中原子和场的动力学特性,并讨论了原子间的偶极相互作用对它们的影响.结果表明:辐射场的压缩以及和压缩(sumsqueezing)的幅度,出现的次数均随原子间的耦合强度的增加而迅速减小.当两个模之间的光子数差增大时,辐射场的压缩以及和压缩的幅度,出现的次数均随之减小,辐射场的两模之间的非经典相关程度减弱,模1的亚泊松分布减弱.在原子的崩溃区域,模2的亚泊松分布增强.增大q将加快原子和双模光场的能量交换. 关键词：     

构造Birkhoff动力学函数的Santilli第二方法的简化

研究力学系统Birkhoff动力学函数的构造方法.Santilli第二方法是目前构造Birkhoff动力学函数时常用的方法之一,但研究发现其计算公式存在冗余项.通过具体的证明得到了简化的Santilli第二方法,从而为自伴随系统Birkhoff动力学函数的构造提供了更为简洁的计算公式.举例说明结果的应用.     

基于半导体光放大器中非线性偏振旋转效应单一光缓存环全光时隙交换处理能力研究

对基于半导体光放大器(SOA)中非线性偏振旋转效应(NPR)效应的单一光缓存环多数据包的全光时隙交换(TSI)处理能力进行了理论和实验研究,在使用归纳法导出单一缓存环实现多数据包全光时隙(TSI)必要条件的基础上,针对各种全光TSI操作要求得出了相应光数据包的调度方案,在实验上,以基于SOA中NPR效应的单一光缓存环实验系统,开展了多数据包全光TSI操作的实验研究,根据上述光数据包理论调度方案进行相应系统参数设定,进行了速率为10 Gb/s的3个和4个数据包的全光TSI实验,实验结果与理论预期相符合,研究成果为减少昂贵SOA元件的用量、简化基于光缓存环全光TSI系统的结构提供了可靠依据,对推进全光TSI技术的发展具有重要意义。     

Improving Cu2ZnSnS4 (CZTS) solar cell performance by an ultrathin ZnO intermediate layer between CZTS absorber and Mo back contact

The effects of an ultrathin ZnO intermediate layer deposited at the CZTS/Mo interface on CZTS solar cell performance have been investigated in this work. The ZnO layer inhibits the generation of MoS₂ layer and the formation of voids in the CZTS absorber. Consequently, the incorporation of this layer reduces the series resistance and increases the shunt resistance, which boosts photovoltaic conversion efficiency from 1.13% to 4.3%. (© 2014 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

A new method for high-energy pulsed Gamma measurement within intense background x-rays

The accelerator-generating 6.13~MeV pulsed Gamma by ¹⁹F(p, αγ )¹⁶⁰ reaction usually synchronizes with an intense bremsstrahlung x-ray which has a maximum energy of 1~MeV. This paper proposes a new method, named the scattering and absorbing method, to diagnose the 6.13~MeV Gamma. This method includes two parts: the detector and a scatterer placed in front of the detector. The detector converts the Gamma to electrons and then collects the electrons by a scintillator. In order to restrain the interference of the low-energy background, the scintillator collects the electrons at a small angle. The scintillator is wrapped with electro-absorbing material to absorb the low-energy electrons generated by background x-rays. The theoretical sensitivity ratio of 6.13~MeV Gamma to 1~MeV x-rays is greater than 150. The scatterer is a pretreatment tool to scatter some background x-rays away from the radial beam before they enter the detector. By varying the length, the scatterer can reduce the background x-rays to an acceptable level for the detector.     

X-ray spectra induced by slow highly charged Ar q + ions in collision with Nb surface

The X-ray spectra of Nb surface induced by Ar ^q+ (q = 16,17) ions with the energy range from 10 to 20 keV/q were studied by the optical spectrum technology. The experimental results indicate that the multi-electron excitation occurred as a highly charged Ar¹⁶⁺ ion was neutralized below the metal surface. The K shell electron of Ar¹⁶⁺ was excited and then de-excited cascadly to emit K X-ray. The intensity of the X-ray emitted from K shell of the hollow Ar atom decreased with the increase of projectile kinetic energy. The intensity of the X-ray emitted from L shell of the target atom Nb increased with the increase of projectile kinetic energy. The X-ray yield of Ar¹⁷⁺ is three magnitude orders larger than that of Ar¹⁶⁺. Supported by the National Natural Science Foundation of China (Grant Nos.10774149 and 10405025)     

一类非线性T-S模糊时滞系统的鲁棒观测器型H∞控制器设计

针对同时具有分布时滞和非线性项的T-S模糊时滞系统, 提出观测器型H_∞输出反馈控制器设计方法. 首先, 以非线性矩阵不等式形式给出时滞相关的满足H_∞性能指标的稳定性分析充分条件; 其次, 给出与所给稳定性条件等价的线性矩阵不等式条件. 在此基础上, 讨论带有非线性项的观测器型H_∞输出反馈控制的可解问题. 最后, 通过仿真算例说明控制器设计方法的可行性. 关键词： T-S模糊系统 分布时滞 观测器型输出反馈控制 H_∞控制')" href="#">H_∞控制     

Preparation and Characterization of Chitosan-Blended Multiwalled Carbon Nanotubes

Composites comprised of chitosan (CS) and multiwalled carbon nanotubes (MWCNTs) were fabricated by milling and ultrasonication dispersion methods. Scanning electron microscopy images showed homogeneous dispersion of MWCNTs throughout the CS matrix for samples prepared by either ultrasonication or milling methods. Further, the crystallinity of the CS component was found to decrease with the addition of MWCNTs, although the decomposition temperature and the storage modulus (E′) of the samples were improved. The decomposition temperature for the composite prepared by milling was 7°C higher than that by the ultrasonication. Meanwhile, the E′ decreased relatively slowly with temperature in the dynamic mechanical analysis measurements. In addition, IR analysis implied an interaction between CS and MWCNTs, which likely originated from hydrogen bonds between the amino, hydroxyl, and carboxyl groups of the two components. Compared with the ultrasonication, milling was more effective to promote the formation of the hydrogen bonds between CS and the MWCNTs and thus enhance the thermal stability of CS.