Compression Behaviour of Ni77P23 Amorphous Alloy up to 30.5 GPa

The compression behaviour of Ni77P23 amorphous alloy is investigated at room temperature in a diamond-anvil cell instrument using in-situ high pressure energy dispersive x-ray diffraction with a synchrotron radiation source. The equation of state is determined by fitting the experimental data according to the Birch-Murnaghan equation. It is found that the structure of Ni77P23 amorphous alloy is stable under pressures up to 30.5 GPa. Within the pressure range from zero to the experimental one, the pressure-induced structural relaxation is reversible.     

辐射加热金X光再发射时间测量

利用星光Ⅱ三倍频激光打双盘靶，研究了辐射加热材料的Ｘ光发射时间。激光脉冲能量４０～６０Ｊ、脉冲宽度６００～７００ｐｓ。通过两台时间关联的亚千Ｘ光能谱仪分别监测双盘靶初、次级发射Ｘ光谱，给出了辐射加热次级Ｘ光再发射时间。     

基于ZBLANⅩⅣPr,Yb频率上转换发光的三维立体显示

本文对利用ZBLANⅩⅣPr,Yb频率上转换发光的三维立体显示做了研究,探讨了其中的一些物理问题.在实验中,我们利用Yb³⁺离子敏化的方法提高Pr³⁺的上转换发光效率;通过降低能引起单频上转换发光的激光强度来提高寻址点和非寻址点在显示过程中的对比度.     

Global Smooth Solutions of the Equations of a Viscous,Heat - Conducting,One - Dimensional Gas with Density - Dependent Viscosity

We consider initial boundary value problems for the equations of the one-dimensional motion of a viscous, heat-conducting gas with density-dependent viscosity that decreases (to zero) with decreasing density. We prove that if the viscosity does not decrease to zero too rapidly, then smooth solutions exist globally in time.     

含三正辛胺微胶囊对六价铬的富集

本文将对六价铬有效的萃取剂ＴＯＡ（三正辛胺）微胶囊化，制成填充柱型的酸性体系六价铬的富集分离装置。实验结果表明，微胶囊填充柱中每毫升ＴＯＡ对六价铬的最大萃取容量为１５８．０ｇ／ｍＬ，为纯ＴＯＡ液相萃取的４．９倍。微胶囊经碱／水洗涤后，可再生使用。     

一种漂移室定位子性能反常现象的研究

研究了一种漂移室定位子性能的反常现象,它关系到定位子的使用寿命．着重测量了暗电流和随机噪声与时间、高压及温度的关系.     

不良导体热系数和热体散热率测量方法研究(英文)

本文介绍一种直接测量散热率新方法．进而测出不良导体的热系数。该方法，减小了由间接测量散热率所带来的误差，实验装置简单，操作方便，参数少，测量结果的精确性和重复性都有较大提高，更重要的是这一新的实验方法突出了物理思想。     

激光除锈过程的实时监测技术研究

对激光除锈过程中的实时监测技术进行了实验研究,结果表明:除锈过程中产生的声波强度会随着表面清洁度的变化而发生明显的变化,声波信号包含了除锈过程中的大量信息,可作为激光除锈实时监测的基本信号.     

边界衍射波理论公式的准确性数值分析

利用数值分析的方法分析了由边界波理论公式所得的圆形光阑衍射场的光强分布.通过对边界波理论公式所得的光强分布曲线,对几何照明区与阴影区的光强分布曲线与面衍射积分公式所得的光强分布曲线进行比较,分析了边界波理论公式对衍射场描述的准确性.     

Dielectric effect on the rf characteristics of a helical groove travelling wave tube

A new type of partial-dielectric-loaded helical groove slow-wave structure (SWS) for millimetre wave travelling wave tube (TWT） is presented in this paper.The radio-frequency characteristics including the dispersion properties,the longitudinal electric field distribution and the beam-wave coupling impedance of this structure are analysed.The results show that the dispersion of the helical groove circuit is weakened,the phase velocity is reduced and the position of the maximum Ez is moved from the mouth to the inside of the groove after partially filling the dielectric materials in the helical groove SWS.Therefore,the dielectric-loaded helical groove SWS is suitable for a multi-beam TWT with broad band and high gain.