Drag on two nonuniformly structured flocs moving along the axis of a cylindrical tube

The boundary effect on the drag on two identical, nonuniformly structured flocs moving along the axis of a cylindrical tube filled with a Newtonian fluid is investigated at a small to medium larger Reynolds number. A two-layer model is adopted to simulate various possible structures of a floc, and the flow field inside is described by Darcy–Brinkman model. The results of numerical simulation reveal that a convective flow is present in the rear region of a floc when Reynolds number is on the order of 40. The presence of the tube wall and/or the porous structure of a floc has the effect of reducing that convective flow. For a fixed level of the volume-average permeability of a floc, the influence of the tube wall on the drag depends upon floc structure; the influence on a nonuniformly structured floc is more significant than that on a uniformly structured floc. The more nonuniform the floc structure, the more appreciable the deviation of the drag coefficient–Reynolds number curve from a Stokes’-law-like relation becomes. The smaller the volume-average permeability of a floc and/or the smaller the separation distance between the two flocs, the greater is the deviation, but the presence of the tube wall has the effect of reducing that deviation.     

Electrochemical monitoring of indigo preparation using Maya’s ancient procedures

The preparation of indigo from Indigofera suffruticosa following the procedures attributed to ancient Mayas was electrochemically monitored using the voltammetry-of-microparticles approach. The mechanism formation of indigotin and indirubin from its precursors, indican and isatan, is discussed. Comparison of voltammetric profiles for differently prepared and commercial indigos and genuine Maya Blue samples suggests that the preparation procedure of indigo changed during the Late Classical Maya period. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Preparation of polymer-supported phosphine from ferrocene for palladium-catalyzed Suzuki-Miyaura cross-coupling reactions

Polymer-supported phosphine ligand 3b derived from ferrocene was prepared,and applied in palladium-catalyzed Suzuki- Miyaura reactions.A range of aryl bromides can couple with phenylboronic acid to obtain corresponding biaryls in excellent yields. The recycling of the polymer-bound catalyst was tested without adding palladium.     

离子性指数、极化效应指数烷烃^13C NMR化学位移的 关系研究

定义了烷烃分子中碳原子的离子性指数(INI)，用离子性指数(INI)、极化效应指数(PEI)及N^i~H(i=αβΥ)结构信息参数研究了烷烃的^13CNMR化学位移模型，结果表明，烷烃^13CNMR化学位移(CS)可用下式来定量描述：CS=194.6156-37.7394(INI)+98.6505(ΣPEI)+27.1630(INI/ΣPEI)-652.9106(ΣPEI/INI)+0.7735N^α~H+2.2468N^β~H-0.1742N^γ~H。用上式估算了304个碳原子的化学位移，平均绝对误差仅为0.77δ，标准差0.9860δ，预测值与实验值非常吻合。     

Elemental analysis of Korean women’s blood serums using instrumental neutron activation analysis

Instrumental neutron activation analysis was used to assess the concentration of the inorganic trace elements in Korean women’s blood serums. It was found that a high concentration of Na and Cl incurs an analytical interference, but the 12 elements such as Br, Ca, Cl, Co, Cr, Cs, Fe, K, Na, Rb, Se and Zn could be determined under the condition of an interference minimization. Serum samples collected from 63 women were analyzed and the concentration level and range of the elements were evaluated. NIST SRMs were analyzed simultaneously for quality control. The average values of the Na and Cl determined in the serum samples were 3,365 and 3,533 mg/l, Ca was 96.4 mg/l and K was 191 mg/l. Besides, Br, Se and Zn have a concentration level of 6.46, 0.13 and 0.98 mg/l, respectively. It was found that there is no significant difference between the present values and the reported values.     

DETERMINATION OF DEGREE OF CRYSTALLINITY OF NYLON 1212 BY WIDE-ANGLE X-RAY DIFFRACTION

Based on the X-ray scattering intensity theory and using the approximate expression for the atomic scattering factor, the correction factors for three crystalline peaks and an amorphous peak of Nylon 1212 were calculated and the formula of degree of crystallinity of Nylon 1212 was derived by a graphic multipeak resolution method. The degree of crystallinity calculated from the WAXD method is compatible with those obtained by density and calorimetry methods.     

Theoretical and experimental studies of the electrochemistry of <Emphasis Type="Italic">p</Emphasis>-aminophenol on a golden electrode

The geometric parameters, vibrational frequencies, and thermochemical values of p-quinonimine (p-AQ) and p-aminophenol (p-AP) were computed ab initio (IIF) and by the density functional theory (DFT) method with the 6-31G(d, p) basis set. Cyclic voltammetry with a golden electrode of p-AP solutions in phosphate buffers at pH 7.30 showed that the standard electrode potential of half reaction for p-QI and p-AP was 0.728 V. The standard electrode potentials of half reactions for p-QI and p-AP were calculated using the free energies and solvation energies of p-QI, p-AP, p-benzoquinone (p-BQ), and hydroquinone (p-HQ). The results showed that the standard electrode potential of half reaction for p-QI and p-AP was 0.743 V at the B3LYP/6-31G(d, p) level and 0.755 V at the HF/6-31G(d, p) level. The standard electrode potentials computed at the B3LYP/6-31G(d, p) and HF/6-31G(d, p) levels were close to their experimental values. The article is published in the original.     

In Vitro Determination of Dobesilate in Medicine and Human Urine with Chemiluminescence Detection

A unique flow injection chemiluminescence (CL) method for the determination of calcium dobesilate in pharmaceutical preparations and human urine is presented in this paper. The analytical reagents involved in the CL reaction, luminol and ferricyanide, were both immobilized on an anion-exchange column in an FI system. The CL signal produced by the reaction of luminol with ferricyanide (the reagents had been eluted from the column through sodium phosphate injection) decreased in the presence of dobesilate. The decreased CL intensity was linear to the dobesilate concentration in the range 0.2100.0ngmL^–1. At a flow rate of 2.0mLmin^–1, one analytical cycle can be completed in 1.5min, including sampling and washing, resulting in a throughput of 40 cycles per hour. The proposed method was applied successfully to the determination of dobesilate in pharmaceutical preparations and human urine without any pre-treatment. It was found that, after oral administration, the dobesilate concentration reached its maximum after three hours, and the dobesilate metabolism ratio in 24 hours was 57.1% in the bodies of volunteers.Received September 14, 2002; accepted March 11, 2003 Published online July 16, 2003     

Technological quality determination of pharmaceutical disintegrant by DSC cooling and DSC photovisual

A number of disintegrants are available on the market. They improve tablets’ disintegration. The objective of this work is the comparison of the technological quality parameters of disintegrants using different analytical techniques. Three batches of disintegrants and their binary mixtures (water:disintegrants) were investigated. Cooling experiments were used from –30 up to 200°C. The data obtained showed calorimetric differences between the samples. In the binary mixtures water showed different crystallization behaviour from the one found in the literature. According to the results DSC technique helped the quality control of different disintegrants.     

Thermodynamic characterization of different actin isoforms

Summary The thermodynamic properties of the cardiac and skeletal a-actin isoforms were studied to characterize the molecular bases of the functional differences between them with the method of differential scanning calorimetry (DSC). The thermal properties of the actin filaments were described in the presence of calcium and magnesium ions as well. Based on the calculated free energy changes the α-cardiac actin filaments appeared to be more stable in its physiologically more relevant, magnesium saturated form. The magnesium saturated form of the α-cardiac actin filaments seemed to be more stable compared to the calcium saturated form of it. The enthalpy and entropy changes could differentiate between the α-cardiac and α-skeletal actin isoforms and between the calcium and magnesium saturated cardiac actin isoforms as well. Our results can demonstrate that the few differences between the amino acid sequences of the α-actin isoforms have an influence on the thermal properties and maybe on the function of these proteins as well.