Glass transition temperature and thermal stability of ZnS/PMMA nanocomposites

In this article, ZnS nanoparticles were prepared by wet chemical precipitation method using zinc sulphate (ZnSO₄), sodium sulphide (Na₂S) and thio-glycerol. These nanoparticles were characterized through X-ray diffraction (XRD) and transmission electron microscope (TEM) measurements. The solution-based processing was used to prepare Poly methyl methacrylate (PMMA) nanocomposites with different weight percents (0, 2, 4, 6 and 8) of ZnS nanoparticles. The obtained ZnS/PMMA nanocomposites were characterized through XRD, scanning electron microscope and TEM measurements. The dynamic mechanical analyzer was used to obtain the storage modulus and glass transition temperature (T _g) of the nanocomposites. The apparent activation energy of the glass transition region was also determined using the Vogel–Fulcher–Tammann equation. The results indicated that the thermal stability of ZnS/PMMA nanocomposites was higher than PMMA and 6 wt. % of ZnS nanoparticles in PMMA matrix showed the maximum activation energy, which indicated that this nanocomposite had higher thermal stability than other composites.     

Investigations on silver/polyaniline electrodes for electrochemical supercapacitors

Polyaniline (PANI) and silver doped polyaniline (Ag/PANI) thin films were deposited on stainless steel substrates by a dip coating technique. To study the effect of doping concentration of Ag on the specific capacitance of PANI the concentration of Ag was varied from 0.3 to 1.2 weight percent. Fourier transform-infrared and Fourier transform-Raman spectroscopy, and energy dispersion X-ray techniques were used for the phase identification and determination of the doping content in the PANI films, respectively. The surface morphology of the films was examined by Field Emission Scanning Electron Microscopy, which revealed a nanofiber like structure for PANI and nanofibers with bright spots of Ag particles for the Ag/PANI films. There was decrease in the room temperature electrical resistivity of the Ag/PANI films of the order of 10(2) with increasing Ag concentration. The supercapacitive behavior of the electrodes was tested in a three electrode system using 1.0 M H(2)SO(4) electrolyte. The specific capacitance increased from 285 F g(-1) (for PANI) to 512 F g(-1) for Ag/PANI at 0.9 weight percent doping of Ag, owing to the synergic effect of PANI and silver nanoparticles. This work demonstrates a simple strategy of improving the specific capacitance of polymer electrodes and may also be easily adopted for other dopants.     

Regioselectivity switch achieved in the palladium catalyzed α-arylation of enones by employing the modified Kuwajima-Urabe conditions

A new regioselective approach to the synthesis of α-aryl enones is reported. This represents an important application of the Kuwajima-Urabe protocol toward the synthesis of this simple albeit complex functional array. Several α-aryl enones were synthesized by the palladium catalyzed arylation of triethylsilylenol ethers of enones with high regioselectivity and broad scope, utilizing sterically encumbered electron-rich phosphine ligands to drive the reaction.     

Polyvinyl alcohol: an efficient fuel for synthesis of superparamagnetic LSMO nanoparticles for biomedical application

La(0.7)Sr(0.3)MnO(3) (LSMO) nanoparticles have been prepared using glycine and polyvinyl alcohol (PVA) as fuels. Their crystal structure, particle morphology and compositions are characterized using X-ray diffraction, transmission electron microscopy, field-emission electron microscopy and energy dispersive analysis of X-ray. They show a pseudo-cubic perovskite structure. The spherical particle sizes of 30 and 20 nm have been obtained from samples prepared by glycine and PVA respectively. The field cooled (FC) and zero field cooled (ZFC) magnetizations have been recorded from 5 to 375 K at 500 Oe and superparamagnetic blocking temperatures (T(B)) of 75 and 30 K are obtained from samples prepared by glycine and PVA respectively. Particle size distribution is observed from dynamic light scattering measurements. Dispersion stability of the particles in water is studied by measuring the Zeta potential with varying the pH of the medium from 1 to 12. Under induction heating experiments, a hyperthermia temperature (42-43 °C) is achieved by both the samples (3-6 mg mL(-1)) at magnetic fields of 167-335 Oe and at a frequency of 267 kHz. The bio-compatibility of the LSMO nanoparticles is studied on the L929 and HeLa cell lines by MTT assay for up to 48 h. The present work reveals the importance of synthesis technique and fuel choice on structural, morphological, magnetic, hyperthermia and biocompatible properties of LSMO and predicts the suitability for biomedical applications.     

Earbud-type earphone modeling and measurement by head and torso simulator

This paper presents an analytical model using equivalent circuit method to design an earbud earphone. The electroacoustic parameters of a miniature loudspeaker are measured through a laser triangulation method. Design configurations are analyzed in accordance with the open and closed states of vent and sound holes of earphone. The equivalent circuit model is validated by the head and torso simulator measurements in an anechoic chamber. The effects of vent and sound holes on frequency response are examined and elucidated. The vent and sound holes found to affect the fundamental resonance frequency, low, and medium frequency response. The effect of sponge cover over the earphone’s front side is also investigated. Finally, it is concluded that the sponge can elevate the sound pressure level to 120 dBSPL and above, raising the possibility of permanent and incurable hearing loss. The major contribution of this work leads to successful development of earbud earphone.     

Synthesis, photophysical characterization, and enzymatic incorporation of a microenvironment-sensitive fluorescent uridine analog

The synthesis of a microenvironment-sensitive base-modified fluorescent ribonucleoside analog based on a 5-(benzo[b]thiophen-2-yl)pyrimidine core, enzymatic incorporation of its corresponding triphosphate into RNA oligonucleotides, and photophysical characterization of fluorescently modified oligoribonucleotides are described.     

Spinodal decomposition and phase separation kinetics in nanoclay–biopolymer solutions

Intensity of light, I(q,t), scattered from homogeneous aqueous solutions, of nanoclay (Laponite) and protein (gelatin‐A), was studied to monitor the temporal and spatial evolution of the solution into a phase‐separated nanoclay–protein‐rich dense phase, when the sample temperature was quenched below spinodal temperature, T_s (=311 ± 3 K). The zeta potential data revealed that the dense phase comprised charge‐neutralized intermolecular complexes of nanoclay and protein chains of low surface charge. The early stage, t < 500 s, of phase separation could be described adequately through Cahn‐Hilliard theory of spinodal decomposition where the intensity grows exponentially, I(q, t) = I₀ exp.(2R(q)t). The wave vector, q dependence of the growth parameter, R(q) exhibited a maxima independent of time. Corresponding correlation length, 1/q_c = ξ_c was found to be ≈75 ± 5 nm independent of quench depth. In the intermediate regime, anomalous growth described by I(q, t) ～ t^α with α = 0.1 ± 0.02 independent of q was observed. Rheological studies established that there was a propensity of network structures inside the dense phase. Isochronal temperature sweep studies of the dense phase determined the melting temperature, T_m = 312 ± 4 K, which was comparable with the spinodal temperature. The stress‐diffusion coupling prevailing in the dense phase when analyzed in the Doi‐Onuki model yielded a viscoelastic correlation length, ξ_v determined from low‐frequency storage modulus, G ′₀ ≈ k_B T/ξ, which was ξ_v ≈ 35 ± 3 nm indicating 2ξ_v ≈ ξ_c. It is concluded that the early stage of phase separation in this system was sufficiently described by linear Cahn‐Hilliard theory, but the same was not true in the intermediate stage. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 555–565, 2010     

Synthesis of Some New 3-Substituted Benzofuran Derivatives by Cyclization of Various Phenoxy Acetic Acid Ethyl Esters

Six new 2-[3-(1-benzofuran-3-yl)-1H-pyrazol-1-yl] pyridines were synthesized by cyclization of various phenoxy acetic acid ethyl esters using NaOEt in ethanol at room temperature.     

Green and efficient synthesis of 2, 3-dihydroquinazolin-4(1H)-ones in aqueous medium using ZnFe<Subscript>2</Subscript>O<Subscript>4</Subscript> catalyst under microwave irradiation

A versatile and environmentally benign protocol for the synthesis of 2, 3-dihydroquinazolin-4(1H)-ones has been successfully performed in water, using ZnFe₂O₄ catalyst from 2-aminobenzamide with different aromatic aldehydes.     

Polypyrrole–NiO hybrid nanocomposite films: highly selective,sensitive, and reproducible NO2 sensors

Polypyrrole–nickel oxide (PPy–NiO) hybrid nanocomposite thin-film sensor was prepared by spin-coating method on glass substrate. The PPy–NiO hybrid nanocomposite thin film sensors were used to study room temperature gas-sensing properties for oxidizing (NO₂, Cl₂) as well as reducing (NO₂, H₂S, C₂H₅OH, NH₃, and Cl₂) gases. It was revealed that PPy–NiO (50 %) hybrid nanocomposite thin-film sensor could detect NO₂ at low concentration (100 ppm) with very high selectivity (47 % compared with Cl₂) and high sensitivity (47 %), with better stability (90 %) and reproducibility. The response and recovery times were changed significantly with NO₂ concentration.