Effects of gamma irradiation on some chemicals using an NaI (Tl) detector

The present work was carried out to find out the gamma ray shielding properties and to study the effects using an NaI (Tl) detector using radioactive sources ⁵⁷Co, ¹³³Ba, ¹³⁷Cs, ⁵⁴Mn, ⁶⁰Co and ²²Na at energies 122, 356, 511, 662, 840, 1170, 1275 and 1330?keV, for some chemicals, namely, sodium thiosulfate (Na₂S₂O₃), benzoic acid (C₇H₆O₂), sodium hydroxide (NaOH), poly vinyl alcohol (PVA) (C₂H₄O), potassium nitrate (KNO3), naphthalene (C₁₀H₈). Mass attenuation coefficient (µ_m) values obtained from the experiment were used to determine the effective atomic numbers (Z_eff) and effective electron densities (N_eff), atomic cross-sections (σ_t) and electronic cross-sections (σ_e); it will be observed from the present work that the variation in the obtained values is only due to the increase or decrease in the gamma ray energy and the chemical composition of the sample. It was seen that the calculated and obtained values showed good agreement. The investigated data are useful in the electronic industry, plastic industry, building materials and agriculture fields. From the present work it was found that the PVA could be used as a better gamma shielding material.     

Total Synthesis of Resorcylic Acid Lactone (−)-Neocosmosin A Using Palladium-Catalyzed α-Arylation of Enones as the Key Step

The total synthesis of the 14-membered resorcylic acid lactone neocosmosin A is described. The key step in the synthesis is the palladium-catalyzed α-arylation of TES-enol ethers of enones. The employment of the α-arylation approach to this class of resorcylic acid lactones is a new approach, which has the scope of being generalized into a unified approach for the synthesis of this class of natural products.     

Validated LC Method, with a Chiral Mobile Phase, for Separation of the Isomers of Fexofenadine Hydrochloride

A rapid, simple and sensitive high-performance liquid chromatographic method (HPLC) has been developed to assay atomoxetine HCl in capsules. The HPLC analysis used a reversed phase C18 (150 × 4.6 mm i.d. 5 μm particle size) analytical column and a mobile phase consisting of monobasic potassium dihydrogen orthophosphate and acetonitrile (95:5 v/v), with UV detection at 269 nm. The validation data showed that the assay is sensitive, specific and reproducible for determination of atomoxetine HCl in this dosage form. Calibration curves were linear from 1 to 10 μg mL⁻¹ (R ² > 0.997). The accuracy of the method ranged from 98.13 to 101.5%. Mean inter- and intra-assay relative standard deviations (RSD) were less than 1.0%. The proposed method provided an accurate and precise analysis of atomoxetine HCl in its pharmaceutical dosage form.     

Nucleophilic acyl substitutions of anhydrides with protic nucleophiles catalyzed by amphoteric, oxomolybdenum species

[reaction: see text] Among six different group VIb oxometallic species examined, dioxomolybdenum dichloride and oxomolybdenum tetrachloride were the most efficient catalysts to facilitate nucleophilic acyl substitution (NAS) of anhydrides with a myriad array of alcohols, amines, and thiols in high yields and high chemoselectivity. In contrast to the well-recognized redox chemical behaviors associated with oxomolybdenum(VI) species, the catalytic NAS was unprecedented and tolerates virtually all kinds of functional groups. By using benzoic anhydride as a mediator for in situ generation of an incipient mixed anhydride-MoO(2)Cl(2) adduct with a given functional alkanoic acid, one can achieve oleate, dipeptide, diphenylmethyl, N-Fmoc-alpha-amino, pyruvic, and tert-butylthio ester, N-tert-butylamide, and trityl methacrylate syntheses with appropriate protic nucleophiles. The amphoteric character of the Mo=O unit in oxomolybdenum chlorides was found to be responsible for the catalytic NAS profile as supported by a control NAS reaction of using an authentic adduct-MoOCl(2)(O(2)CBu(t)())(2) between pivalic anhydride and MoO(2)Cl(2) as the catalyst.     

pm-lattices

The pm-lattices are the bounded distributive lattices in which every prime ideal is contained in a unique maximal ideal. In pm-lattices the map which sends every prime ideal into the unique maximal ideal containing it, is shown to be continuous; and this map is the unique retraction of the prime spectrum onto the maximal spectrum. Further we show that the pm-property is equivalent to the normality of the prime spectrum and it implies that the maximal spectrum isT ₂. Presented by A. Horn. The first named author gratefully acknowledges the financial assistance in the form of U.G.C.Jr. Research Fellowship.     

Evidence of quasi-intramolecular redox reactions during thermal decomposition of ammonium hydroxodisulfitoferriate(III), (NH4)2[Fe(OH)(SO3)2]·H2O

Synthesis of ammonium hydroxodisulfitoferriate(III), (diammonium catena-{bis(μ ²-sulfito-κO,κO)-μ ²-hydroxo-κ²O}ferrate(III) monohydrate) (NH₄)₂[Fe(OH)(SO₃)₂]·H₂O (compound 1) and its thermal behavior is reported. The compound is stable in air. Its thermal decomposition proceeds without the expected quasi-intramolecular oxidation of sulfite ion with ferric ions. The disproportionation reaction of the ammonium sulfite, formed from the evolved NH₃, SO₂ and H₂O in the main decomposition stage of 1, results in the formation of ammonium sulfate and ammonium sulfide. The ammonium sulfide is unstable at the decomposition temperature of 1 (150 °C) and transforms into NH₃ and H₂S which immediately forms elementary sulfur by reaction with SO₂. The formation and decomposition of other intermediate compounds like (NH₄)₂S_nO_x (n = 2, x = 3 and n = 3, x = 6) results in the same decomposition products (S, SO₂ and NH₃). Two basic iron sulfates, formed in different ratios during synthesizing experiments performed under N₂ or in the presence of air, have been detected as solid intermediates which contain ammonium ions. The final decomposition product was proved to be α-Fe₂O₃ (mineral name hematite).

     

Development of a Liquid‐liquid Extraction System for Rhodium(III) by 2‐octylaminopyridine from Weak Malonate Media

We have developed the extraction method of rhodium(III) from malonate media with 2‐octylaminopyridine (2‐OAP) in xylene at pH 8.0. The quantitative extraction of rhodium(III) with extractant was found by screening of different physicochemical parameters like malonate concentration, extractant concentration, pH, diluents, effect of temperature, aq: org phase ratio, loading capacity of 2‐OAP. The optimum condition was malonate=0.025 M, pH=8.0, 2‐OAP=0.05 M in xylene. The complete stripping of rhodium(III) from the loaded organic phase was carried out with 2 M HCl. Log‐log plot was investigated to determine the stoichiometry of the extracted species and it was found to be 1 : 2 : 1 (metal : acid :extractant). The versatility of the proposed method was checked for extraction and separation of rhodium(III) from binary, ternary mixture of associated metal ions as well as platinum group metals and from the synthetic solution of rhodium minerals and alloys.     

Effect of surfactants on the data directionality and learning behaviour of Al/TiO2/FTO thin film memristor-based electronic synapse

Journal of Solid State Electrochemistry - The present communication deals with the development of the titanium dioxide (TiO2) thin films memristor using simple and cost effective hydrothermal route...     

Fate of CS2 in viscose process: a chemistry perspective

Cellulose dissolution in the viscose process has been facilitated through derivatization by carbon disulphide (CS₂) at xanthation stage by converting alkali cellulose (AC) to cellulose xanthate (CX). CX formation has been always accompanied with sulphur based byproducts formation as dictated by the mechanism published in earlier study (Gondhalekar et al. (Cellulose 26 3 1595–1604, 2019)). The sulphur byproducts formed during viscose synthesis are sodium sulphide (Na₂S), sodium trithiocarbonate (Na₂CS₃: TTC) and other minor sulphur compounds. These byproducts continue to form during ripening process as dictated by time and temperature coupled with concentration of free caustic and CS₂ present in the system. These byproducts get converted into sodium sulphate (Na₂SO₄), hydrogen sulphide (H₂S), CS₂ and other sulphurous compounds during spinning. Overall, uncontrolled ripening without parametric optimization adversely impacts raw material (RM) consumption and creates sustainability challenges. Overall optimization based on viscose process fundamental insights presented in this study will effectively help in achieving operational excellence by reducing rate of undesired reactions to improve RM specific consumption and will compliment overall sustainability efforts in viscose industry.