Shears band in the 105Sn nucleus

The structure of ¹⁰⁵Sn has been investigated through the ⁵⁰Cr(⁵⁸Ni,2pn) reaction at a beam energy of 210 MeV. In addition to an extension of the spherical level scheme, a regular sequence of dipole transitions has been found. The experimental results are in agreement with the prediction of Tilted Axis Cranking calculations, which satisfactorily explain the properties of the band.     

Hydrophilic interaction liquid chromatography method for the determination of ascorbic acid

Hydrophilic interaction liquid chromatography (HILIC) method using internal standard for the determination and stability study of ascorbic acid was developed. HILIC method was very fast and simple using the following analytical conditions: ZIC HILIC (150 x 2.1 mm, 3.5 microm) chromatographic column and mobile phase composed of ACN and 50 mM ammonium acetate buffer pH 6.8 (78:22 v/v). Diode array detection was performed and chromatograms were processed at 268 nm, the maximum wavelength of absorbance of ascorbic acid. An extensive stability study of ascorbic acid as a function of various factors including temperature, stabilizing agents, oxygen presence and its concentration in solution was performed in order to gain information about the quantitative influence of individual stability factors. Low temperature and stabilizing agents (o-phosphoric acid and oxalic acid) were found to be key factors enabling substantial enhancement of the stability of ascorbic acid.     

Rapid micellar HPLC analysis of loratadine and its major metabolite desloratadine in nano-concentration range using monolithic column and fluorometric detection: application to pharmaceuticals and biological fluids

Background

Loratadine is a commonly used selective non-sedating antihistaminic drug. Desloratadine is the active metabolite of loratadine and, in addition, a potential impurity in loratadine bulk powder stated by the United States Pharmacopeia as a related substance of loratadine. Published methods for the determination of both analytes suffer from limited throughput due to the time-consuming steps and tedious extraction procedures needed for the analysis of biological samples. Therefore, there is a strong demand to develop a simple rapid and sensitive analytical method that can detect and quantitate both analytes in pharmaceutical preparations and biological fluids without prior sample extraction steps.

Results

A highly-sensitive and time-saving micellar liquid chromatographic method is developed for the simultaneous determination of loratadine and desloratadine. The proposed method is the first analytical method for the determination of this mixture using a monolithic column with a mobile phase composed of 0.15 M sodium dodecyl sulfate, 10% n-Butanol and 0.3% triethylamine in 0.02 M phosphoric acid, adjusted to pH 3.5 and pumped at a flow rate of 1.2 mL/min. The eluted analytes are monitored with fluorescence detection at 440 nm after excitation at 280 nm. The developed method is linear over the concentration range of 20.0–200.0 ng/mL for both analytes. The method detection limits are 15.0 and 13.0 ng/mL and the limits of quantification are 20.0 and 18.0 ng/mL for loratadine and desloratadine, respectively. Validation of the developed method reveals an accuracy of higher than 97% and intra- and inter-day precisions with relative standard deviations not exceeding 2%.

Conclusions

The method can be successfully applied to the determination of both analytes in various matrices including pharmaceutical preparations, human urine, plasma and breast milk samples with a run-time of less than 5 min and without prior extraction procedures. The method is ideally suited for use in quality control laboratories. Moreover, it could be a simple time-saving alternative to the official pharmacopeial method for testing desloratadine as a potential impurity in loratadine bulk powder.

Open image in new window

Graphical abstract Typical chromatogram of loratadine and its major metabolite desloratadine using the proposed micellar HPLC method

     

Preparation of Cyclodextrin–Iron Species in Water by Laser Ablation: Secondary Ion Mass Spectrometry

Supramolecular complexes between cyclodextrin and iron species are studied by using secondary ion mass spectrometry. The iron species are prepared by pulsed‐laser ablation of bulk iron in water; this gives Fe⁺ (56 m/z) and Fe_xO_y⁺ (x, y=1–7) species. Cyclodextrin is added to the water either before or after the laser ablation. When it is added before laser ablation, molecular fragments of cyclodextrin are detected as dehydrated glucopyranose units (C₆H₈O₄⁺) associated with Fe⁺, FeO⁺, and Fe₂O⁺ species. The focus is to observe supramolecular host–guest complexes or adducts between intact molecules of cyclodextrin and iron species. When cyclodextrin is added after laser ablation, the relevant peak at 1210 m/z is observed and assigned as C₄₂H₆₇O₃₅FeNa⁺, which corresponds to a cyclodextrin molecule minus three H atoms. Two possible explanations of this finding are the presence of the host–guest C₄₂H₆₇O₃₅Na–Fe complex, in which Fe is in the cavity, or the presence of the adduct C₄₂H₆₇O₃₄Na–FeO with FeO on the outer surface; the formation of these complexes are supported by the hydrophobicity of Fe and hydrophilicity of FeO, respectively. Due to the presence of 12 % of intact C₄₂H₇₀O₃₅Na–Fe complex and an estimated Fe/FeO ratio of approximately 10², host–guest formation is assumed to be more significant.     

Photochemical and phototoxic activity of berberine on murine fibroblast NIH-3T3 and Ehrlich ascites carcinoma cells

The present study demonstrates photoinduced generation of superoxide anion radical and singlet oxygen upon UVA irradiation of berberine chloride, and its cytotoxic/phototoxic effects on murine fibroblast non-cancer NIH-3T3 and Ehrlich ascites carcinoma (EAC) cells. The EPR spectra monitored upon photoexcitation of aerated solutions of berberine evidenced the efficient activation of molecular oxygen via Type I and II mechanisms, as the generation of superoxide anion radical and singlet oxygen was observed. The EAC cell line was more sensitive to the effect of non-photoactivated and photoactivated berberine than the NIH-3T3 cell line. UVA irradiation increased the sensitivity of EAC cells to berberine, while the sensitivity of NIH-3T3 cells to photoactivated berberine was not changed. Berberine significantly induced direct DNA strand breaks in tested cells, oxidative lesions were not detected, and the effect of irradiation of cells after berberine treatment did not affect the increase of DNA damage in EAC and NIH-3T3 cells. The DNA damage generated by a combination of berberine with UVA irradiation induced a significant blockage of EAC cells in the S and G(2)/M phases and the stopping/decrease of cell proliferation after 24h of influence. On the other hand, after 36h or 48h of berberine treatment, the DNA damage induced necrotic or apoptotic death of EAC cells. Whether these divergences are caused by differences in the properties of two non-isogenic cell lines or by different berberine uptake and cell localization will be analyzed in our further investigations.     

Gluten determination by gliadin enzyme-linked immunosorbent assay kit: interlaboratory study

An interlaboratory study with 10 participants was performed to obtain validation and performance data for an enzyme-linked immunosorbent assay (ELISA) kit developed for quantitative gluten determination in foods. The ELISA kit used for this study is based on 2 monoclonal and 1 polyclonal antibody developed by Immunotech, a Beckman Coulter Co. This kit did not show any false positive results or cross-reactivity with oat, rice, maize, and buckwheat. The gliadin standard from the Working Group on Prolamin Analysis and Toxicity was included in the kit as reference material for calibration. All participants obtained a gliadin ELISA kit with Standard Operational Procedure and a form for recording test results. The study included 13 samples labeled as "gluten-free" and 2 samples spiked by wheat flour. Seven samples had gliadin content below the limit of quantitation (LOQ) of the method, and 1 sample exceeded the highest calibration level. Gliadin content in the range from 10 to 157 mg/kg (1st day) and from 11 to 183 mg/kg (2nd day) was found in 7 samples (including 2 spiked samples). Results of these samples were used for further statistical analysis and evaluation. The Cochran, Dixon, and Mandel statistical tests were applied for detection of outliers. The LOQ of the kit was estimated.     

Immunoextraction of zinc proteins from human plasma using chicken yolk antibodies immobilized onto paramagnetic particles and their electrophoretic analysis

Zinc(II) as the only transition metal lacking redox activity is an essential part of approximately 10% proteins as a cofactor of these proteins. Considering the fact that there are numerous zinc(II) containing proteins, proteomics and metallomics studies aimed on them require accurate methods for preparation of real biological samples prior to their subsequent analysis using 2DE and MS. For this purpose, we suggested a new method based on chicken anti-zinc antibodies and magnetizable particles. Antibodies were covalently immobilized to the surface of paramagnetic beads activated with tosyl group. Binding of the antibody to the beads was confirmed by secondary anti-chicken antibody conjugated with horseradish peroxidase. The immunoextraction conditions, such as concentration of the beads (6-18 μg/mL of the sample), time of immunoextraction (6-34 min), pH and composition of the elution buffer, and time of extraction (48-300 s) were optimized. Subsequently, zinc proteins were extracted from human plasma and total concentration of zinc was monitored by electrochemical detection in the extracts. Under optimal conditions it was possible to monitor the proteins and zinc removal from the sample by chip CE, SDS-PAGE, and indirectly using electrochemistry.     

Electrophoretically mediated microanalysis

This review describes the existing developments in the use of the capillary electrophoretic microanalytical technique for the in-line study of enzyme reaction, electrophoretically mediated microanalysis (EMMA). The article is divided into a number of parts. After an introduction, the different modes, basic principle, procedure, and some mathematical treatments of EMMA methodology are discussed and illustrated. The applications of EMMA for enzyme assay and for non-enzymatic determination are summarized into two tables. In addition to classical capillary electrophoresis (CE) instrument EMMA, special emphasis is given to a relatively new technique: EMMA on CE microchip. Finally, conclusions are drawn.