Theoretical Study of Weakly Bound Dimers between Hydrogen Fluoride and Some Polar Molecules

Weakly bound linear and bent dimers, FH—X (where X = CO, OC, CNH, NCH, N₂O and ON₂), are investigated using the DFT B3LYP and ab initio MP2 methods with the same basis sets (6–311++G(3df,2pd)). The strengths of the H—C or H—N H‐bonds in dimers FH—CO, FH—CNH, and FH—N₂O are compared with those of the H—O or H—N H‐bonds in dimers FH—OC, FH—NCH, and FH—ON₂. The results obtained for the H‐bond distances, the elongation effect of the HF bond, the red shift of the HF stretching frequency, and the energy difference between the dimer and the charge transfer reveal that the H‐bonds of the first group of dimers are stronger than those of the second. The Gibbs energies calculated for the six dimer formations indicate that the weakly bound dimers are unstable at room temperature (T = 298 K) (FH—X's → FH + X's, ΔG < 0).     

Syntheses,Characterization and Crystal Structures of Three Structurally Similar Dinuclear Schiff Base Cadmium(II) Complexes with Bridging Azide or Thiocyanate Ligands

Three novel Schiff base cadmium(II) complexes, derived from the end‐on (μ‐1,1‐N₃) azide or end‐to‐end (μ‐1,3‐NCS) thio cyanate bridges and similar tridentate Schiff base ligands, have been synthesized under similar synthetic procedures and their crystal structures determined by X‐ray diffraction methods. They are the dinuclear double end‐on azide‐bridged [Cd₂(L1)₂(N₃)₂(μ‐1,1‐N₃)₂] ( 1 ), the dinuclear double end‐on azide‐bridged [Cd₂(L2)₂(N₃)₂(μ‐1,1‐N₃)₂] ( 2 ), and the dinuclear double end‐to‐end thiocyanate‐bridged [Cd₂(L3)₂(NCS)₂(μ_1,3‐NCS)₂] ( 3 ), where L1, L2 and L3 are three similar tridentate Schiff bases obtained by condensation of 2‐pyridylaldehyde with N,N‐diethylethane‐1,2‐diamine, of 2‐pyridylaldehyde with N‐isopropylethane‐1,2‐diamine, and of 2‐pyridylaldehyde with N,N‐dimethylpropane‐1,3‐diamine, respectively. Each cadmium(II) centre in the complexes is in a distorted octahedral coordination. There is a crystallographic inversion centre in each of the complexes. The similar small ligands used as the secondary ligands in the preparation of the cadmium(II) complexes with similar Schiff bases can result in similar structures.     

Mild and Efficient Deprotection of 1,3‐Dithianes with N,N′‐ Diiodo‐N,N′‐1,2‐Ethanediyl‐Bis(p‐Toluenesulphonamide)

Aliphatic and aromatic 1,3‐dithiane are oxidized to the corresponding carbonyl compounds in good yields under mild conditions by N,N′‐diiodo‐N,N′‐1,2‐ethanediyl‐bis(p‐toluenesulphonamide) [NIBTS] and silver nitrate.     

Synthesis of N—（4—Salicylideneiminoaryl）monoaza Crown Ethers and Dioxygen Affinities of Their Cobalt（Ⅱ）Complexes

The Schiff base‐containing pendant monoaza crown ether HL¹, HL², HL³ and HL⁴ have been synthesized by condensation of salicylaldehyde with N‐(4‐aminoaryl) monoaza crown ethers, which were prepared conveniently from 4‐nitro‐N, N‐di(hydroxyethyl) aniline or 4‐nitrobenzyl chloride via cyclization or condensation and reduction. The structures of HL¹—HL⁴ were verified by ¹H NMR, IR spectra, MS and elemental analysis. Moreover, the oxygenation constants (KO2) and thermodynamic parameters (δH⁰ and δS⁰) of their cobalt(II) complexes were determined in the range of ?5 °C to 25 °C, and the effect of crown ring bonded to a Schiff base on the dioxygen affinities of cobalt(II) complexes was also observed as compared to the uncrowned analogue (CoL).     

Synthesis and Visible Spectral Behaviour of Some New N‐Bridgehead Heterocyclic Cyanine Dyes Incorporating Pyrazolo (4,5‐b) Indolizine (Benzoindolizine)

The new unsymmetrical N‐bridgehead, apo (zeromethine), mono‐methine, dimethine, meso substituted tetramethine and styryl cyanine dyes incorporating pyrazolo (4,5‐b) indolizine (benzoindolizine) nuclei were prepared. Structural confirmation was carried out by elemental analyses, IR, H‐NMR, mass spectra and ¹³C‐NMR with the aid of carbon DEPT spectral data. The visible absorption spectra for the newly synthesized cyanines were examined in 95% ethanol.     

Polymerization of methyl methacrylate by 2‐pyrrolidinone and n‐dodecyl mercaptan

The bulk polymerization of methyl methacrylate initiated with 2‐pyrrolidinone and n‐dodecyl mercaptan (R‐SH) has been explored. This polymerization system showed “living” characteristics; for example, the molecular weight of the resulting polymers increased with reaction time by gel permeation chromatographic analysis. Also, the polymer was characterized by Fourier transform infrared spectroscopy, ¹H NMR, and ¹³C NMR techniques. The polymer end with the iniferter structures was found. By the initial‐rate method, the polymerization rate depended on [2‐pyrrolidinone]^1.0 and [R‐SH]⁰. Combining the structure analysis and the polymerization‐rate expression, a possible mechanism was proposed. n‐Dodecyl mercaptan served dual roles—as a catalyst at low conversion and as a chain‐transfer agent at high conversion. Finally, the thermal properties were studied, and the glass‐transition temperature and thermal‐degradation temperature were, respectively, 25 and 80–100 °C higher than that of the azobisisobutyronitrile system. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3692–3702, 2002     

Reactions of cobalt clusters with deuterium

The kinetics of chemical reactions of cobalt clusters Co_n with deuterium are described. Absolute rate constants have been measured in the size range n=7–68 at 293 K. The rate constants are found to be a strong function of cluster size, varying by a factor of 400. This size dependence is most prominent for n=7 to 25: Co₁₅ is the most reactive cluster, and Co_7–9 and Co_19–20 are particularly unreactive. Abrupt changes in the rate constants from one cluster size to the next are observed. For the clusters above n=25, the rate constants show several less prominent maxima and minima superimposed on a slow, nearly monotonic increase with cluster size.     

An Integrated Theory of Adsorption and Partition Mechanism and Eash Contribution to Solute Retention in Reversed Phase Liquid Chromatography

With the combination of the the stoichiometric displacement model for retention (SDM-R) in reversed phase liquid chromatography (RPLC) and the stoichiometric displacement model for adsorption (SDM-A) in physical chemistry,the total number of moles of the re-solvated methanol of stationary phase side.nr,and that of solute side in the mobile phase,q,corresponding the one mole of the desorbing solute,were separately determined and referred as the characterization parameters of the contributions of the adsorption mechanism and partition mechanism to the solute retention,respectively.A chromatographic system of insulin,using mobile phase consisting of the pseudo-homologue of alcohols(methanol,ethanol and 2-propanol)-water and trifluoroacetic acid was employed.The maximum number of the methanol layers on the stationary phase surface was found to be 10.6,only 3 of which being valid in usual RPLC,traditionally referred as a volume process in partition mechanism.However,it still follows the SDM-R.Both of q and nr of insulin were found not to be zero,indicating that the retention mechanism of insulin is a mixed mode of partition mechanism and adsorption mechanism.When methanol is used as the organic modifier,the ratio of q/nr was 1.13,indicating the contribution to insulin retention due to partition mechanism being a bit greater than that due to adsorption mechanism.A linear relationship between q,or nr and the carbon number of the pseudo-homologue in the mobile phase was also found.As a methodology for investigating the retention mechanism retention and behavior of biopolymers.a homologue of organic solvents as the organic modifier in mobile phase has also been explored.     

Synthesis,Structure and Reactivity of [1, 2‐Bis(diphenylphosphinite)ethane]bromotricarbonylmanganese(I) with Reactions of Phosphites,Phosphonites. and Phosphinites

The manganese carbonyl complex [MnBr(CO)₃ L ] ( 1 ), where L = Ph₂POCH₂CH₂OPPh₂, was prepared by reacting [MnBr(CO)₅] with the bidentate ligand 1, 2‐Bis(diphenylphosphinite)ethane. From this compound and the appropriate phosphite, phosphinite or phosphonite ligands were synthesized the complexes [MnBr(CO)₂ LL ′], where L ′ = P(OMe)₃ ( 2 ) or P(OEt)₃ ( 3 ) and [MnBr(CO)₃ L ′₂], where L ′ =PPh(OEt)₂ ( 4 ) or PPh₂(OEt) ( 5 ). The obtained compounds have been characterized by elemental analysis, mass spectrometry, IR and NMR (¹H, ¹³C and ³¹P) spectroscopies and X‐ray diffractometry for the complexes 1 , 4 and 5 .     

Square‐Planar Carbonylchlororhodium(I) Complexes Containing trans‐Spanning Diphosphine Ligands as Catalysts for the Carbonylation of Methanol

The rhodium(I) complexes trans‐[Rh(diphos)(CO)Cl] 7 (diphos=pbpb), 8 (diphos=nbpb), and 9 (diphos=cbpb) were synthesized (Scheme 4) and used as catalysts for the carbonylation of MeOH to AcOH (Scheme 1). The trans coordination imposed by the rigid C‐spacer framework of the diphos ligands pbpb, nbpb, and cbpb, demonstrated by ³¹P‐NMR and IR spectroscopy of 7 – 9 and unambiguously confirmed by single‐crystal X‐ray structure analysis of 7 , improved the thermal stability of the rhodium(I) system under carbonylation conditions and, hence, the catalytic performance of the complexes. For the catalytic carbonylation of MeOH, the active catalyst could be prepared in situ from the mixture of [Rh(CO)₂Cl]₂ and the corresponding diphos ligand pbpb, nbpb, or cbpb, giving the same results as carbonylation in the presence of the isolated complexes 7, 8 or 9 (see Table). The highest activity was observed for complex 7 (or the mixture [Rh(CO)₂Cl]₂/pbpb, the catalytic turnover number (TON) being 950 after 15 min (170°, 22 bar).