Iron(II)‐ and Cobalt(II) Complexes with Tridentate Bis(imino)pyridine Nitrogen Ligands Bearing Chiral Bulky Aliphatic and Aromatic Substituents: Crystal Structure of [CoCl2{2, 6‐bis[R‐(+)‐(bornylimino)methyl]pyridine}]

Iron(II) and cobalt(II) complexes ( 7 ‐ 15 ) based on new aldimine 2, 6‐bis[(imino)methyl]pyridine ( 1 , 2 , 4 , 6 ) and ketimine (2, 6‐bis[(imino)ethyl]pyridine ( 3 , 5 ) ligands with bulky chiral aliphatic or aromatic terminal groups have been prepared and characterized by ¹H NMR, ¹³C NMR, IR‐, mass spectroscopy (EI), and elemental analysis. The complex [CoCl₂(BBoMP)]·¹/₂ CHCl₃ ( 13 ) (BBoMP: 2, 6‐bis{(R‐(+)‐(bornylimino)‐methyl}pyridine) crystallizes in monoclinic space group P2₁ with cell dimensions: a = 7.6603(11) Å, b = 28.3153(14) Å, c = 13.537(2) Å, V = 2908.1(6) ų, Z = 4. The coordination sphere around Co is distorted trigonal bipyramidal.     

乙醇和甲苯组成的最低共沸混合物热力学性质的研究

The molar heat capacity of the azeotropic mixture composed of ethanol and toluene was measured by a high precision adiabatic calorimeter from 80 to 320 K. The glass transition and phase transitions of the azeotropic mixture were determined based on the heat capacity measurements. A glass transition at 103.350 K was found. A solid-solid phase transition at 127.282 K, two solid-liquid phase transitions at 153.612 and 160.584 K were observed, which correspond to the transition of metastable crystal to stable crystal of ethanol and the melting of ethanol and toluene, respectively. The thermodynamic functions and the excess ones of the mixture relative to the standard temperature 298.15 K were derived based on the relationships of the thermodynamic functions and the function of the measured heat capacity with respect to temperature.     

Theoretical investigation of the mechanisms of reaction of NCN with NO and NS

Quantum-chemical calculations were performed on the mechanisms of reaction of NCN with NO and NS. Possible mechanisms were classified according to four pathways yielding products in the following four possible groups: N2O/N2S + CN, N2 + NCO/NCS, N2 + CNO/CNS, and CNN + NO/NS, labeled in order from p1/p1s to p4/p4s. The local structures, transition structures, and potential-energy surfaces with respect to the reaction coordinates are calculated, and the barriers are compared. In the NCN + NO reaction, out of several adduct structures, only the nitroso adduct NCNNO lies lower in energy than the reactants, by 21.89 kcal/mol; that adduct undergoes rapid transformation into the products, in agreement with experimental observation. For the NS counterpart, both thionitroso NCNNS and thiazyl NCNSN adducts have energies much lower than those of the reactants, by 43 and 29 kcal/mol, respectively, and a five-membered-ring NCNNS (having an energy lower than those of the reactants by 36 kcal/mol) acts as a bridge in connecting these two adducts. The net energy barriers leading to product channels other than p4s are negative for the NS reaction, whereas those for the NO analogue are all positive. The channel leading to p1 (N2O + CN) has the lowest energy (3.81 kcal/mol), whereas the channels leading to p2 (N2 + NCO) and p2s (N2 + NCS) are the most exothermic (100.94 and 107.38 kcal/mol, respectively).     

Synthesis of Functionalized o‐, m‐, and p‐Terphenyl Derivatives by Consecutive Cross‐Coupling Reactions of Triazene‐Substituted Arylboronic Esters

Triazene‐substituted arylboronic esters were prepared readily from the corresponding aryl magnesium derivatives and shown to function as a new class of donor–acceptor‐substituted coupling reagents. The selective functionalization of these aromatic derivatives led to a wide variety of terphenyl derivatives in which the original bifunctional unit (often further substituted with another functional group) formed the central aromatic ring. The functionalized terphenyl derivatives were formed in two efficient cross‐coupling steps from the triazene‐substituted boronic esters: Suzuki cross‐coupling with an aryl halide was followed by BF₃?OEt₂‐induced palladium‐catalyzed coupling of the diazonium salt generated in situ from the triazene with an arylboronic acid.     

Synthesis of SBA-15/carbon composite with an ink-bottle-like pore structure by a novel pulse CVD technique

A novel and easy post modification method, pulse chemical vapor deposition (pulse CVD), was developed to tailor the pore-opening of SBA-15 while largely keeping its surface area and pore volume. By using acetylene as carbon precursor and nitrogen as carrier gas, the pore-mouth of SBA-15 was effectively reduced from 8.1 nm to 5.1 nm within 5 min while maintaining the pore body at 8.1 nm. This ink-bottle-structured SBA-15/carbon composite only losses 12% BET specific surface area and 16% total pore volume, respectively. The SBA-15/carbon composite is highly hexagonally ordered and has similar particle morphology as the original SBA-15. The effect of three pore modification factors—the number of cycles of pulse CVD, the ratio of acetylene/nitrogen and the feeding time of carbon precursor, on the final pore structure of the SBA-15/carbon composite is also studied.     

Kinetically controlled Ag+-coordinated chiral supramolecular polymerization accompanying a helical inversion

We report kinetically controlled chiral supramolecular polymerization based on ligand–metal complex with a 3 : 2 (L : Ag⁺) stoichiometry accompanying a helical inversion in water. A new family of bipyridine-based ligands (d-L1, l-L1, d-L2, and d-L3) possessing hydrazine and d- or l-alanine moieties at the alkyl chain groups has been designed and synthesized. Interestingly, upon addition of AgNO₃ (0.5–1.3 equiv.) to the d-L1 solution, it generated the aggregate I composed of the d-L1AgNO₃ complex (d-L1 : Ag⁺ = 1 : 1) as the kinetic product with a spherical structure. Then, aggregate I (nanoparticle) was transformed into the aggregate II (supramolecular polymer) based on the (d-L1)₃Ag₂(NO₃)₂ complex as the thermodynamic product with a fiber structure, which led to the helical inversion from the left-handed (M-type) to the right-handed (P-type) helicity accompanying CD amplification. In contrast, the spherical aggregate I (nanoparticle) composed of the d-L1AgNO₃ complex with the left-handed (M-type) helicity formed in the presence of 2.0 equiv. of AgNO₃ and was not additionally changed, which indicated that it was the thermodynamic product. The chiral supramolecular polymer based on (d-L1)₃Ag₂(NO₃)₂ was produced via a nucleation–elongation mechanism with a cooperative pathway. In thermodynamic study, the standard ΔG° and ΔH_e values for the aggregates I and II were calculated using the van''t Hoff plot. The enhanced ΔG° value of the aggregate II compared to that of the formation of aggregate I confirms that aggregate II was thermodynamically more stable. In the kinetic study, the influence of concentration of AgNO₃ confirmed the initial formation of the aggregate I (nanoparticle), which then evolved to the aggregate II (supramolecular polymer). Thus, the concentration of the (d-L1)₃Ag₂(NO₃)₂ complex in the initial state plays a critical role in generating aggregate II (supramolecular polymer). In particular, NO₃⁻ acts as a critical linker and accelerator in the transformation from the aggregate I to the aggregate II. This is the first example of a system for a kinetically controlled chiral supramolecular polymer that is formed via multiple steps with coordination structural change.

The nanoparticles were transformed into the supramolecular polymer as the thermodynamic product, involving a helical inversion from left-handed to right-handed helicity.     

Sustainable biorefinery processes using renewable deep eutectic solvents

1. Download : Download high-res image (194KB)
2. Download : Download full-size image

     

Investigation of m-nitroaniline formation during the Zimmermann reaction

The Zimmermann reaction for the determination of 17-ketosteroids was tested under both room-temperature and steam-distillation reaction conditions. meta-Nitroaniline was isolated from the residue of the steam distillation by ether extraction and thin-layer chromatography. Conclusive identification was by infrared spectroscopy. In contrast, m-nitroaniline was not formed under room-temperature reaction conditions, even when allowed to react for 24 hr. Similar results were also obtained for the reaction between acetone and m-dinitrobenzene under alkaline conditions. In conclusion, the results indicate that m-nitroaniline formation cannot account for the conversion of structure I to structure II under room-temperature reaction conditions as investigated herein.     

Electroanalytical Study of the Composition of the Raw Pigment Mixtures that Yield the Metallic Lustre on Ceramics. A Link Between Composition and Final Result

Voltammetry of immobilized microparticles was used to study the electrochemistry of the raw pigments that produce the metallic lustre on ceramics after a successful firing. To study this influence of the mixture components on the reduction properties to achieve the metallic lustre, 14 mixtures of illitic clay, Fe₂O₃, HgS, CuO and AgNO₃ were prepared and studied in different media. Iron oxide improves the yield of the reduction of the metals and cinnabar helps a closer reduction of silver to copper reduction and prevents the Ag? Cu alloying because of the formation of silver–mercury adducts. The presence of one of the metals influences the peak position of the other metal. The use of vinegar as diluting agent is not casual, because in this media the reduction of silver takes place at a potential closer to the copper. This electroanalytical technique allowed to distinguish between powders of different composition and offered some information about the role of the components in the reduction of copper and silver and the selection of vinegar to prepare the raw pigment suspensions.     

Semiempirical Molecular Orbital Studies of the Acylation Step in the Lipase‐Catalyzed Ester Hydrolysis

In this study, we present the results from the semiempirical molecular orbital calculations for the acylation step in the lipase‐catalyzed ester hydrolysis. The results reveal that the lowest energy path for the formation of the tetrahedral intermediate is for the serine residue of the catalytic triad to attack the substrate, followed by coupling heavy atom movement and proton transfer. The calculations of four active site models show that the cooperation of the aspartate group and the oxyanion hole is capable of lowering the activation energy by about 16 kcalmol^?1. Our results further suggest that the lipase‐catalyzed ester hydrolysis adopts the single proton transfer mechanism.