Tailored thioxanthone‐based photoinitiators for two‐photon‐controllable polymerization and nanolithographic printing

Printing of high‐resolution three‐dimensional nanostructures utilizing two‐photon polymerization has gained significant attention recently. In particular, isopropyl thioxanthone (ITX) has been implemented as a photoinitiator due to its capability of initiating and depleting polymerization on demand, but new photoinitiating materials are still needed in order to reduce the power requirements for the high‐throughput creation of 3D structures. To address this point, a suite of new thioxanthone‐based photoinitiators were synthesized and characterized. Then two‐photon polymerization was performed using the most promising photoinitiating molecule. Importantly, one of the initiators, 2,7‐bis[(4‐(dimethylamino)phenyl ethynyl)‐9H‐thioxanthen‐9‐one] (BDAPT), showed a fivefold improvement in the writing threshold over the commonly used ITX molecule. To elucidate the fundamental mechanism, the excitation and inhibition behavior of the BDAPT molecule were evaluated using density functional theory (DFT) calculations, low‐temperature phosphorescence spectroscopy, ultra‐fast transient absorption spectroscopy, and the two‐photon Z‐scan spectroscopic technique. The improved polymerization threshold of this new photoinitiator presents a clear pathway for the modification of photoinitiators in 3D nanoprinting. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1462–1475     

Evaporative micro-particle self assembly influenced by capillary evacuation

As evaporation does not incur energy introduction, the droplet coffee-stain patterning approach is attractive for biochemical tests conducted in the field or in third world environments. A practical strategy uses chemically functionalized microbeads for the coffee stain deposition process. From an application perspective, it will be necessary to minimize the coffee stain deposition time, as evaporation, depending on the volume of the droplet, can be a slow process. The introduction of a porous media will generate a capillary flow (or wicking) that removes any remnant liquid in the droplet, thus permitting it to be done inexpensively and in the field. Using optical profilometry, we were able to establish that polystyrene microspheres developed more copious and defined single ring coffee depositions than silica of the same size and concentration in a suspension. In analyzing the droplet capillary evacuation process with a porous media, we found the liquid bridge formed during the later stages to rupture and leave behind some liquid material for a second stage evaporation process. This was responsible for a two ring structure that was more visible with silica microspheres. A high degree of hysteresis of the contact angle was found to develop at the contact line in which values below 5° could be achieved. Dynamic observations showed the copious and dense packing of polystyrene particles to be more resistant to ring break up from the evacuation flow. Nevertheless, erosion of the back array portions of the ring was evident notwithstanding either type of microsphere used.     

Experimental and theoretical study of rotationally inelastic diffraction of D2 from NiAl(110)

We present a detailed experimental and theoretical study of elastic and rotationally inelastic diffraction of D(2) from NiAl(110) in the energy range 85-150 meV. The experiments were performed using a high-resolution, fixed angle geometry apparatus. Quantum and classical dynamical calculations were performed by using a six-dimensional potential energy surface constructed upon interpolation of a set of DFT (density functional theory) data. We show that, although elastic diffraction peak intensities are accurately described by theory in the whole range of incidence energies and angles explored, significant discrepancies are obtained for RID peaks, especially for those involving rotational initial states with j(i) > 0. Possible reasons for this discrepancy are discussed.     

A ratiometric CdSe/ZnS nanocrystal pH sensor

The development of a reversible chemical sensor based on a CdSe/ZnS nanocrystal (NC) is described. Signal transduction is accomplished by fluorescence resonance energy transfer (FRET) between the NC and a fluorescent pH-sensitive squaraine dye attached to the surface of the NC. The efficiency of FRET, and consequently the relative intensity of NC and dye emissions, is modulated with the pH-dependent absorption cross section of the squaraine dye. The design of a NC sensor based on FRET results in a ratiometric sensor since the emission intensities of dye and NC may be referenced to the isosbestic point between NC and dye emissions. The ratiometric approach allows sensing to be performed, regardless of issues surrounding collection efficiency (scattering environment, light fluctuations, etc.) and dye:NC loadings.     

Synthesis of α-alkyl-α-aminosilanes by rhodium-catalyzed hydrosilylation of Boc-protected vinyl amines

α-Aminosilanes can be readily prepared by rhodium-catalyzed hydrosilylation of Boc-substituted enamines, followed by acidic removal of the Boc group. This convergent approach allows for the rapid synthesis of new aminosilane structures, useful for their bioactivity and unique reactivity.     

Assaying the efficacy of dual-antiplatelet therapy: use of a controlled-shear-rate microfluidic device with a well-defined collagen surface to track dynamic platelet adhesion

We report the development and demonstration of an assay that distinguishes the pharmacological effects of two widely used antiplatelet therapies, aspirin (COX-1 inhibitor) and clopidogrel (P2Y₁₂ inhibitor). Whole blood is perfused through a low-volume microfluidic device in contact with a well-characterized (ellipsometry, atomic force microscopy) acid-soluble type I collagen surface. Whole human blood treated in vitro with a P2Y₁₂ inhibitor 2-methylthioadenosine 5′-monophosphate triethylammonium salt (2-MeSAMP) extended the time to the start of platelet recruitment, i.e., platelet binding to the collagen surface. Treatment with 2-MeSAMP also slowed the rate of aggregate buildup, with an overall reduced average platelet aggregate area after 8 min of constant blood flow. A far smaller effect was observed for in vitro treatment with aspirin, for which the rate of change of surface coverage is indistinguishable from controls. In whole blood obtained from patients under treatment with dual-antiplatelet therapy (aspirin and clopidogrel), a significant extension of time to platelet recruitment was observed along with a slowed rate of aggregate buildup and an average aggregate size approximately half that of control measurements. Differentiation of the pharmacological effects of these two well-targeted antiplatelet pathways suggests a role for this assay in determining the antiplatelet effects of these and related new therapeutics in clinical settings.     

The use of bacteria immobilized in tubular membrane reactors for heavy metal recovery and degradation of chlorinated aromatics

Microbial treatments of waste water can be done in membrane reactors. A membrane installed outside the reactor is used to separate bacteria from the treated effluent.

A new membrane reactor concept is presented. The separation membrane is introduced in the reactor and not outside as in a normal one. The membrane plays the role of a separator of two streams and is used at the same time as the immobilizing support for the bacteria.

The reactor keeps the bacteria active via a specific nutrient stream that is provided on one side of the membrane. The bacteria grow in and on the membrane where they form an active biofilm. The bacteria can treat the effluent on one side and can be kept active via the nutrient stream at the other side without contamination of the effluent by the nutrient.

In this work, the performance of the BICMER (Bacteria Immobilized Composite MEmbrane Reactor) is demonstrated via treatments of effluents containing heavy metals or organic xenobiotics.

For heavy metal removal Alcaligenes eutrophus CH34 bacteria were used. These bacteria induce a metal bioprecipitation process that results in the formation of crystalline metal carbonates, which are recovered on a separate column in the reactor. In this way metals can be recovered without disturbing the biofilm on the membrane. Metals such as Cd, Zn, Cu, Pb and Y can be reduced to less than 50 ppb. The metals Co, Ni, Pd and Ge are reduced to below 100 ppb.

For organic xenobiotics Alcaligenes eutrophus AE1308 bacteria or other strains (depending on the xenobiotic to be degraded) were used. This strain degrades the xenobiotic 3-chlorobenzoate (Cba) and 2,4-dichlorophenoxyacetic acid to CO₂, H₂O and chloride). Concentrations of 3 mM Cba could be reduced to less than 0.1 mM. For other toxic organic compounds, different biodegrading strains need to be used.     

Hydrogen dissociation on Cu(111): the influence of lattice motion. Part I

We have studied the effect of lattice displacement on the interaction of H(2) with the Cu(111) surface using the Specific Reaction Parameter (SRP) approach to Density Functional Theory (DFT). We have systematically investigated how the motion of the surface atoms affects some features of the Potential Energy Surface (PES), such as the dissociation barrier height and the barrier geometry corresponding to some representative reaction pathways, and the anisotropy of the potential at these geometries. This analysis has allowed us to identify the surface degrees of freedom that are likely to be most relevant for H(2) dissociation. In particular, we have found that the lattice coordinate displacements that have the largest effect on the H(2)/Cu(111) DFT-SRP barrier heights and locations concern the motion of the 1st layer and 2nd layer Cu atoms in the Z direction, and motion of the 1st layer atoms in the directions parallel to the surface. Whereas the first degree of freedom mostly affects the barrier geometry, the second and third motions can lower or raise the barrier height. The latter effect cannot be described with the usual surface oscillator dynamical models employed in the past to include surface motion, and its dynamical influence on the dissociative adsorption needs to be further investigated.     

A high temperature and atmospheric pressure experimental and detailed chemical kinetic modelling study of 2-methyl furan oxidation

An experimental ignition delay time study for the promising biofuel 2-methyl furan (2MF) was performed at equivalence ratios of 0.5, 1.0 and 2.0 for mixtures of 1% fuel in argon in the temperature range 1200–1800 K at atmospheric pressure. Laminar burning velocities were determined using the heat-flux method for mixtures of 2MF in air at equivalence ratios of 0.55–1.65, initial temperatures of 298–398 K and atmospheric pressure. A detailed chemical kinetic mechanism consisting of 2059 reactions and 391 species has been constructed to describe the oxidation of 2MF and is used to simulate experiment. Accurate reproduction of the experimental data has been obtained over all conditions with the developed mechanism. Rate of production and sensitivity analyses have been carried out to identify important consumption pathways of the fuel and key kinetic parameters under these conditions. The reactions of hydrogen atom with the fuel are highlighted as important under all experimental conditions studied, with abstraction by the hydrogen atom promoting reactivity and hydrogen atom addition to the furan ring inhibiting reactivity. This work, to the authors knowledge, is the first to combine theoretical and experimental work to describe the oxidation of any of the alkylated furans. The mechanism developed herein to describe 2MF combustion should also function as a sub-mechanism to describe the oxidation of 2,5-dimethyl furan whilst also providing key insights into the oxidation of this similar biofuel candidate.