Spectrophotometric and conductometric study of complexation of salophen and some transition metal ions in nonaqueous polar solvents

The complexation reaction between Cu(2+), Co(2+) and Ni(2+) metal cations with N,N'-bis(salicylidene)-1,2-phenylenediamine (salophen), in three nonaqueous polar solvents such as: acetonitrile (AN), dimethyl sulfoxide (DMSO), methanol (MeOH) and two binary mixtures of AN:DMSO and AN:MeOH at 25 degrees C were studied by spectrophotometric and conductometric methods. All investigated metal ions form 1:1 ML complex which their stability constants were determined and increase as Irving-Williams stability order of Co(2+)相似文献   

Adsorption of triton X-100 on silica gel: effects of temperature and alcohols

Adsorption of Triton X-100 (TX-100) on silica gel has been studied as a function of temperature (308–328 K) and composition for mixtures of water with ethanol or t-butanol. The adsorption capacity of silica gel for TX-100 decreases with increase in alcohol content. Adsorption isotherms of TX-100 on silica gel are four-region and were analyzed using the ARIAN (adsorption isotherm regional analysis) model. Data in regions 2, 3 and 4 were fitted to the Temkin, bilayer and reverse desorption isotherms, respectively. The results show that adsorption of TX-100 on silica gel in water and alcohol-water binary mixtures occurs mainly through formation of monolayer surface aggregates or low bilayer coverage.      

An efficient ultrasonic-assisted synthesis of ethyl-5-(aryl)-2-(2-alkokxy-2-oxoethylidene)-7-methyl-3-oxo-3, 5-dihydro-2H-thiazolo [3, 2-a] pyrimidine-6-carboxylate derivatives

Dihydropyrimidinone derivatives were prepared by tri-component reaction of ethyl aceto acetate, aldehydes and thiourea in the presence of modified montmorillonite nanostructure as a catalyst and used as key intermediates for the synthesis of ethyl-5-(aryl)-2-(2-alkokxy-2-oxoethylidene)-7-methyl-3-oxo-3,5-dihydro-2H-thiazolo[3,2-a]pyri midine-6-carboxylate derivatives with use of diethyl and dimethyl acetylene dicarboxylate by two methods: (a) in methanol as a solvent under ultrasonic irradiation at ambient temperature (b) in methanol as a solvent at ambient temperature (conventional magnetic stirring). Ultrasound-assisted synthesis provides excellent yields in short reaction times (15–25 min) at room temperature.     

Synthesis and application of a novel solid-phase microextraction adsorbent: Hollow fiber supported carbon nanotube reinforced sol–gel for determination of phenobarbital

A novel solid-phase microextraction technique using a hollow fiber-supported sol–gel combined with multi-walled carbon nanotubes was employed in the determination of phenobarbital in wastewater. In this new technique, a silica-based, organic–inorganic polymer containing functionalized multi-walled carbon nanotubes (MWCNTs) was prepared with sol–gel technology via the reaction of tetraethylorthosilicate (TEOS) with an acidic catalyst (HCl). This sol was injected into a polypropylene hollow fiber segment for in situ gelation. This device operated in direct immersion sampling mode. The experimental setup is simple and affordable, and the device is disposable, so there is no risk of cross-contamination or carry-over. Parameters affecting extraction such as pH of the aqueous solution, ageing and extraction times, aqueous sample volume, agitation speed and carbon nanotube amount were optimized. Linearity was observed over a range of 0.50–5000 ng mL⁻¹, with an estimation coefficient (r²) higher than 0.982. The limit of detection (LOD) was 0.32 ng mL⁻¹ (n = 5), and repeatability (RSD% = 2.9) was from the average of three levels of analyte concentrations (1, 1000 and 4500 ng mL⁻¹) with three replicates for each within a single day. Finally, a pre-concentration factor of 2100 was obtained for phenobarbital.     

MgO Nanoparticles as a Recyclable Heterogeneous Catalyst for the Synthesis of Polyhydroquinoline Derivatives under Solvent Free Conditions

Magnesium oxide nanopartticels in average size between 35–120 nm were prepared by sonochemistry method. Synthesis of polyhydroquinoline derivatives using MgO nanoparticles from the reaction of dimedone, benzaldehyde, ethyl acetoacetate and ammonium acetate under solvent‐free conditions is reported. Easy handling, reusability, thermal stability and non‐toxicity of the catalyst make the present protocol as an eco‐friendly and economically acceptable method for synthesis of these heterocycles.     

NMR study of the stoichiometry and stability of complexation reaction between Mg2+, Ca2+, Sr2+ and Ba2+ ions and 60-crown-20 in binary acetonitrile solvent mixtures

Proton nuclear magnetic resonance (¹H-NMR) spectroscopy was used to study the complexation reaction between Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ ions and 60-crown-20 in a series of binary mixtures of deuterated acetonitrile (AN), nitromethane (NM) and D₂O at 27?°C. Formation constants of the 1:1 complexes were determined through computer fitting of the chemical shift/mol ratio data and found to vary in the order of Ba²⁺?>?Sr²⁺?>?Mg²⁺?≈?Ca²⁺. The influence of the solvent composition on the stability of the resulting complexes was also discussed. In all cases, the changes in the stability constants with the solvent composition were monotonic and showed a good correlation with the inherent solvation ability of the pure solvents which form the mixture.     

Edge-shared [M2Cl10]2? complexes of reaction between oxophilic group 4 metal and phosphorus ylides

The reactions between oxophilic group 4 metal chlorides, ??-keto ylides in THF, led to the formation of titanium, zirconium and hafnium edge-shared [M₂Cl₁₀]^2? complexes (1a?C3f). We describe that the reaction between MCl₄ (M = Ti, Zr and Hf) with phosphorus ylides produce edge-shared [M₂X₁₀]^2? complexes instead of O-coordination previously reported complexes. Adding dimethyl sulfoxide (DMSO) to these complexes in room temperature crystalline solid [M(DMSO)₈] · 4Cl · mH₂O · DMSO] (M = Ti (1g), Zr (2g) and Hf (3g); m = 0?C3) together with phosphonium salts in mother liquid were formed. The compounds were characterized by elemental analysis, IR and ¹H, ¹³C and ³¹P NMR spectroscopy.     

A novel inorganic–organic nanohybrid material SBA-15@triazine/H<Subscript>5</Subscript>PW<Subscript>10</Subscript>V<Subscript>2</Subscript>O<Subscript>40</Subscript> as efficient catalyst for the one-pot multicomponent synthesis of multisubstituted pyridines

A novel inorganic–organic nanohybrid material SBA-15@triazine/H₅PW₁₀V₂O₄₀ (SBA-15@ADMPT/H₅PW₁₀V₂O₄₀) was prepared and used as an efficient, eco-friendly, and highly recyclable catalyst for the one-pot multicomponent synthesis of multisubstituted pyridines from the reaction of aldehydes, cyclic ketones, malononitrile, and ammonium acetate with good to excellent yields (77–97%). The nanohybrid catalyst was prepared by the chemical anchoring of Keggin heteropolyacid H₅PW₁₀V₂O₄₀ onto the surface of SBA-15 mesoporous silica modified with 2-APTS -4,6-bis(3,5-dimethyl-1H-pyrazol-1-yl)-1,3,5-triazine (ADMPT) linker. Standard characterization data such as FT-IR, XRD, SEM, TEM, BET, EDX, and DTA-TGA spectroscopy confirmed that the heteropolyacid H₅PW₁₀V₂O₄₀ is well dispersed on the surface of the solid support and its structure is preserved after immobilization on the SBA-15 mesoporous silica modified with ADMPT. Furthermore, the nanocatalyst can be recovered easily and reused five times without considerable loss of catalytic activity. In general, these advantages highlight this protocol as an attractive and useful methodology, among the other methods reported in the literature, for the eco-friendly and rapid synthesis of biologically active multisubstituted pyridines.     

One-pot three-component process for the synthesis of substituted pyrano[2,3-<Emphasis Type="Italic">c</Emphasis>]pyrazoles catalyzed by nanostructured FSM-16-SO<Subscript>3</Subscript>H

A three-component process for the one-pot synthesis of 6-amino-4-aryl-5-cyano-3-methyl-1-phenyl-1,4-dihydropyrano[2,3-c]pyrazoles by the reaction of aldehydes, 3-methyl-1-phenyl-1H-pyrazol-5(4H)-one, and malononitrile in the presence of FSM-16-SO₃H as an efficient mesoporous catalyst. The FSM-16-SO₃H was prepared and characterized by SEM, XRD, BET, and FT-IR techniques. The advantages of the presented method are high yields, short reaction times, easy purification of products, easy work-up, and reusability of the catalyst.     

Preparation of Nano Silica Supported Sodium Hydrogen Sulfate: As an Efficient Catalyst for the Trimethyl,Triethyl and t‐Butyldimethyl Silylations of Aliphatic and Aromatic Alcohols in Solution and under Solvent‐free Conditions

Nano silica supported sodium hydrogen sulfate has been prepared by mixing NaHSO₄ with activated Nano silicagel. We wish to report a new method for the synthesis of trimethyl (TMS), triethyl (TES) and t‐butyldimethyl silyl (TBS) ethers from benzylic, allylic, propargylic alcohols, phenols, naphtholes and some of phenolic drugs in the solution and under solvent‐free conditions.