Parametric study of plasma active medium and gain saturation region in a Ne-like soft X-ray laser

Plasmas created by the interaction of high power optical laser with a target surface can be used as a source of soft X-ray lasers. Plasma and pump laser characteristics play significant role in achieving high gain coefficient for such plasma based on soft X-ray lasers. In the present work, the plasma active medium parameters for germanium element at a wavelength of 19.6 nm irradiated by a double-pulse pump laser have been studied using MED103 hydrodynamic code. For this purpose, first, the effects of laser intensity, pulse width and delay time of two pulses on the gain coefficient have been investigated and the optimum conditions for the maximum gain extent of Ne-like germanium soft X-ray laser are obtained. Then, in order to calculate the intensity of such high gain lasers in which Linford equation is invalid, we have adopted the general formula of amplified spontaneous emission intensity, which is valid in all range of intensities even at much higher intensities than saturation intensity. Finally, the soft X-ray laser intensities in the saturated areas for different plasma lengths have been calculated. The results show that the output of soft X-ray laser intensity with 294 cm⁻¹ gain coefficient can reach to about several times saturated intensity by applying a 1–2 mm plasma length as the active medium.     

Fabrication of a Nanostructure Based Electrochemical Sensor for Voltammetric Determination of Epinephrine,Uric Acid and Folic Acid

A carbon paste electrode (CPE) was modified by incorporation of graphene nano sheets and a ferrocene derivative. The modified electrode showed an excellent electrocatalytic effect on the oxidation of epinephrine. In phosphate buffer solution (PBS) of pH 7.0, the oxidation current increased linearly with concentration of epinephrine in the range of 0.05–550.0 µM and a detection limit (3σ) 27.0 nM was obtained for epinephrine. Then the modified electrode was used to determine epinephrine in an excess of uric acid and folic acid by SWV.     

Total Synthesis of Tri-, Hexa- and Heptasaccharidic Substructures of the O-Polysaccharide of Providencia rustigianii O34

A general and efficient strategy for synthesis of tri-, hexa- and heptasaccharidic substructures of the lipopolysaccharide of Providencia rustigianii O34 is described. For the heptasaccharide seven different building blocks were employed. Special features of the structures are an α-linked galactosamine and the two embedded α-fucose units, which are either branched at positions-3 and -4 or further linked at their 2-position. Convergent strategies focused on [4+3], [3+4], and [4+2+1] couplings. Whereas the [4+3] and [3+4] coupling strategies failed the [4+2+1] strategy was successful. As monosaccharidic building blocks trichloroacetimidates and phosphates were employed. Global deprotection of the fully protected structures was achieved by Birch reaction.     

New insight into experimental and theoretical mechanistic study on a green synthesis of functionalized 4H-chromenes using magnetic nanoparticle catalyst

A green synthesis of functionalized 4H-chromenes using one-pot, three-component reaction of salicylaldehyde ( 1 ), active methylene ( 2 ), and carbon-based nucleophile ( 3 ) using Fe₃O₄@CONa nanoparticles in water has been performed at 60°C. The Fe₃O₄@CONa nanoparticle as an efficient, green, and magnetically reusable heterogeneous catalyst was applied in these reactions up to the nine runs. Green catalyst and solvent, short reaction time, high product yields, as well as simple work-up procedure were found as some advantages of this methodology. The density functional theory calculations were applied to all-inclusive perception of the one-pot, three-component reaction mechanism. The most reactions progressed through the following route: (a) nucleophilic addition of 2 to 1 ; (b) ring closing, dehydration; (c) nucleophilic substitution of 3 (2-naphtol, 4-hydroxycumarin) to intermediate. Sometimes mechanism mutated to: (a) nucleophilic addition of 3 (indole, 2-methylindole) to 1 , and dehydration; (b) nucleophilic addition of 2 to intermediate; and (c) ring closing, and dehydration. The frontier molecular orbitals, NBO analyses, molecular electrostatic potential of reactants, and intermediates confirmed the proposal mechanisms. Theoretical study could be so helpful to pick out suitable reactants of the reaction.     

\hbox {Ph}_{3}\hbox {P/CCl}_{4} as a highly efficient reagent for one-pot N-alkylation of sulfonamides from alcohols: a rapid route to N-alkyl sulfonamides synthesis

A mild, efficient, and selective protocol for the one-pot $N$ -alkylation of sulfonamides with alcohols using triphenylphosphine and carbon tetrachloride is described. In this method, treatment of alcohols with a mixture of triphenylphosphine, carbon tetrachloride, and potassium sulfonylamide salts in refluxing anhydrous DMF furnishes the corresponding $N$ -alkyl sulfonamides in good to excellent yields. This protocol is highly efficient for various structurally diverse alcohols and potassium sulfonylamide salts. In this paper the influence of solvents and various reagents as sources for electrophilic-halogen instead of carbon tetrachloride in combination with triphenylphosphine have been examined. This protocol demonstrates the selectivity between primary and secondary alcohols. A plausible mechanism for this protocol has been described.     

In situ formation deposited ZnO nanoparticles on silk fabrics under ultrasound irradiation

Deposition of zinc(II) oxide (ZnO) nanoparticles on the surface of silk fabrics was prepared by sequential dipping steps in alternating bath of potassium hydroxide and zinc nitrate under ultrasound irradiation. This coating involves in situ generation and deposition of ZnO in a one step. The effects of ultrasound irradiation, concentration and sequential dipping steps on growth of the ZnO nanoparticles have been studied. Results show a decrease in the particles size as increasing power of ultrasound irradiation. Also, increasing of the concentration and sequential dipping steps increase particle size. The physicochemical properties of the nanoparticles were determined by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and wavelength dispersive X-ray (WDX).     

Some algebraic properties of hypergraphs

We consider Stanley-Reisner rings k[x ₁, …, x _n ]/I(H) where I(H) is the edge ideal associated to some particular classes of hypergraphs. For instance, we consider hypergraphs that are natural generalizations of graphs that are lines and cycles, and for these we compute the Betti numbers. We also generalize some known results about chordal graphs and study a weak form of shellability.     

Synthesis and photoluminescent and nonlinear optical properties of manganese doped ZnS nanoparticles

In this work we synthesized ZnS:Mn²⁺ nanoparticles by chemical method using PVP (polyvinylpyrrolidone) as a capping agent in aqueous solution. The structure and optical properties of the resultant product were characterized using UV-vis optical spectroscopy, X-ray diffraction (XRD), photoluminescence (PL) and z-scan techniques. UV-vis spectra for all samples showed an excitonic peak at around 292 nm, indicating that concentration of Mn²⁺ ions does not alter the band gap of nanoparticles. XRD patterns showed that the ZnS:Mn²⁺ nanoparticles have zinc blende structure with the average crystalline sizes of about 2 nm. The room temperature photoluminescence (PL) spectrum of ZnS:Mn²⁺ exhibited an orange-red emission at 594 nm due to the ⁴T₁-⁶A₁ transition in Mn²⁺. The PL intensity increased with increase in the Mn²⁺ ion concentration. The second-order nonlinear optical properties of nanoparticles were studied using a continuous-wave (CW) He-Ne laser by z-scan technique. The nonlinear refractive indices of nanoparticles were in the order of 10⁻⁸ cm²/W with negative sign and the nonlinear absorption indices of these nanoparticles were obtained to be about 10⁻³ cm/W with positive sign.     

UV-prepared salep-based nanoporous hydrogel for controlled release of tetracycline hydrochloride in colon

A highly swelling nanoporous hydrogel (NPH) was synthesized via UV-irradiation graft copolymerization of acrylic acid (AA) onto salep backbone and its application as a carrier matrix for colonic delivery of tetracycline hydrochloride (TH) was investigated. Optimized synthesis of the hydrogel was performed by the classic method. The swelling behavior of optimum hydrogel was measured in different media. The hydrogel formation was confirmed by Fourier transform infrared spectroscopy (FTIR) and thermo-gravimetric analysis (TGA/DTG/DTA). The study of the surface morphology of hydrogels using SEM showed a nanoporous (average pore size: about 350nm) structure for the sample obtained under optimized conditions. The drug delivery results demonstrated that this NPH could successfully deliver a drug to the colon without losing the drug in the stomach, and could be a good candidate as an orally administrated drug delivery system.     

Green synthesis and biological activity investigation of new derivatives of spiroisatins

In this research, the synthesis of novel derivatives of spiroisatins in high yields was investigated. These new compounds were synthesized using a multicomponent reaction (MCR) of isatin, malononitrile, acetophenone derivatives, diethyl oxalate, primary amines, and Et₃N in aqueous media. Under similar conditions, spiropyrroloisatins were prepared using MCRs of synthesized spiroistins. The antioxidant activity of newly synthesized spiroisatins is due to having an NH group which was evaluated by two procedures. Also, the antimicrobial activity of newly generated spiroisatins was evaluated by a disk distribution process utilizing two kinds of Gram-negative bacteria and Gram-positive bacteria and bacterial growth was stopped using these compounds. The advantages of this method are short reaction times, high yields of products, and the easy separation of catalyst and product using simple procedures.