A mass spectrometric line for tritium analysis of water and noble gas measurements from different water amounts in the range of microlitres and millilitres

This paper describes the procedure followed for noble gas measurements for litres, millilitres and microlitres of water samples in our laboratory, including sample preparation, mass spectrometric measurement procedure, and the complete calibrations. The preparation line extracts dissolved gases from water samples of volumes of 0.2 μ l to 3 l and it separates them as noble and other chemically active gases. Our compact system handles the following measurements: (i) determination of tritium concentration of environmental water samples by the ³He ingrowth method; (ii) noble gas measurements from surface water and groundwater; and (iii) noble gas measurements from fluid inclusions of solid geological archives (e.g. speleothems). As a result, the tritium measurements have a detection limit of 0.012 TU, and the expectation value (between 1 and 20 TU) is within 0.2 % of the real concentrations with a standard deviation of 2.4 %. The reproducibility of noble gas measurements for water samples of 20–40 ml allows us to determine solubility temperatures by an uncertainty better than 0.5 °C. Moreover, noble gas measurements for tiny water amounts (in the microlitre range) show that the results of the performed calibration measurements for most noble gas isotopes occur with a deviation of less than 2 %. Theoretically, these precisions for noble gas concentrations obtained from measurements of waters samples of a few microlitres allow us to determine noble gas temperatures by an uncertainty of less than 1 °C. Here, we present the first noble gas measurements of tiny amounts of artificial water samples prepared under laboratory conditions.     

Shape-Constrained Estimation Using Nonnegative Splines

We consider the problem of nonparametric estimation of unknown smooth functions in the presence of restrictions on the shape of the estimator and on its support using polynomial splines. We provide a general computational framework that treats these estimation problems in a unified manner, without the limitations of the existing methods. Applications of our approach include computing optimal spline estimators for regression, density estimation, and arrival rate estimation problems in the presence of various shape constraints. Our approach can also handle multiple simultaneous shape constraints. The approach is based on a characterization of nonnegative polynomials that leads to semidefinite programming (SDP) and second-order cone programming (SOCP) formulations of the problems. These formulations extend and generalize a number of previous approaches in the literature, including those with piecewise linear and B-spline estimators. We also consider a simpler approach in which nonnegative splines are approximated by splines whose pieces are polynomials with nonnegative coefficients in a nonnegative basis. A condition is presented to test whether a given nonnegative basis gives rise to a spline cone that is dense in the space of nonnegative continuous functions. The optimization models formulated in the article are solvable with minimal running time using off-the-shelf software. We provide numerical illustrations for density estimation and regression problems. These examples show that the proposed approach requires minimal computational time, and that the estimators obtained using our approach often match and frequently outperform kernel methods and spline smoothing without shape constraints. Supplementary materials for this article are provided online.     

Rhodamine-Based Cu2+ -Selective Fluorosensor: Synthesis, Mechanism, and Application in Living Cells

A rhodamine B-based fluorescence probe (1) for the sensitive and selective detection of Cu²⁺ ion has been designed and synthesized using pyridine moiety. The optical properties of this compound have been investigated in acetonitrile-water binary solution (7:3 v/v). Compound 1 is found to be an excellent sensor for a biologically/physiologically very important transition metal ion (Cu²⁺) using only the two very different modes of measurements (absorption and emission); one case displayed intensity enhancement whereas in other case showed intensity depletion (quenching). A mechanistic investigation has been performed to explore the static nature of quenching process. The sensor has been found to be very effective in sensing Cu²⁺ ion inside living cells also.     

Chiral separation of lansoprazole and rabeprazole by capillary electrophoresis using dual cyclodextrin systems

Novel capillary electrophoresis methods using CDs as chiral selectors were developed and validated for the chiral separation of lansoprazole and rabeprazole, two proton pump inhibitors. Fourteen different neutral and anionic CDs were screened at pH 4 and 7 in the preliminary analysis. Sulfobutyl‐ether‐β‐CD with a degree of substitution of 6.5 and 10 at neutral pH proved to be the most suitable chiral selector for both compounds. Various dual CD systems were also compared, and the possible mechanisms of enantiomer separation were investigated. A dual selector system containing sulfobutyl‐ether‐β‐CD degree of substitution 6.5 and native γ‐CD proved to be the most adequate system for the separations. Method optimization was carried out using an experimental design approach, performing an initial fractional factorial screening design, followed by a central composite design to establish the optimal analytical conditions. The optimized methods (25 mM phosphate buffer, pH 7, 10 mM sulfobutyl‐ether‐β‐CD/20 mM γ‐CD, +20 kV voltage; 17°C temperature; 50 mbar/3 s injection, detection at 210 nm for lansoprazole; 25 mM phosphate buffer, pH 7, 15 mM sulfobutyl‐ether‐β‐CD/30 mM γ‐CD, +20 kV voltage; 18°C temperature; 50 mbar/3 s injection, detection at 210 nm for rabeprazole) provided baseline separation for lansoprazole (R_s = 2.91) and rabeprazole (R_s = 2.53) enantiomers with favorable migration order (in both cases the S‐enantiomers migrates first). The optimized methods were validated according to current guidelines and proved to be reliable, linear, precise, and accurate for the determination of 0.15% distomer as chiral impurity in dexlansoprazole and dexrabeprazole samples.     

Sol–gel derived Ba/SrTiO3–MgF2 solar control coating stack on glass for architectural and automobile applications

Research on Chemical Intermediates - Fully dielectric solar control coatings based on alternating layers of Ba (or Sr)TiO3 and MgF2 were deposited on soda lime glass substrates. Three-layered...     

Highly sensitive and rapid determination of tacrolimus in peripheral blood mononuclear cells by liquid chromatography–tandem mass spectrometry

After solid organ transplantation, tacrolimus is given to prevent rejection. Therapeutic drug monitoring is used to reach target concentrations of tacrolimus in whole blood. Because the site of action of tacrolimus is the lymphocyte, and tacrolimus binds ~80% to erythrocytes, the intracellular tacrolimus concentration in lymphocytes is possibly more relevant. For this purpose, we aimed to develop, improve and validate a UPLC–MS/MS method to measure tacrolimus concentrations in isolated peripheral blood mononuclear cells (PBMCs). PBMCs were isolated using a Ficoll separation technique, followed by a washing step using red blood cell lysis. A cell suspension of 50 μL containing 1 million PBMCs was used in combination with MagSiMUS‐TDM^PREP. To each sample we added 30 μL lysis buffer, 20 μL reconstitution buffer containing ¹³C²H₄‐tacrolimus as internal standard, 40 μL MagSiMUS‐TDM^PREP Type I Particle Mix and 175 μL Organic Precipitation Reagent VI for methanol‐based protein precipitation. A 10 μL aliquot of the supernatant was injected into the UPLC–MS/MS system. The method was validated, resulting in high sensitivity and specificity. The method was linear (r² = 0.997) over the range 5.0–1250 pg/1 × 10⁶ PBMCs. The inaccuracy was <5% and the imprecision was <15%. The washing steps following Ficoll isolation could be performed at either room temperature or on ice, with no effect of the temperature on the results. A method for the analysis of tacrolimus concentrations in PBMCs was developed and successfully validated. Further research will be performed to investigate the correlation between concentrations in PBMCs and clinical outcome.     

C-H bond activation of coordinated pyridine: ortho-pyridyl-ditechnetiumhydridocarbonyl metal cyclus. Crystal structure and dynamic behavior in solution

The reaction of pyridine with ditechnetium decacarbonyl [Tc2(CO)10] (1) leads to a novel ortho-pyridyl-ditechnetium hydrido complex, [Tc2(mu-H)(mu-NC5H4)(NC5H5)2(CO)6] (2) and its precursor [Tc2(mu-CO)2(NC5H5)2(CO)6] (3). At ambient temperature 1 was found to react slowly with pyridine to afford the substitution product 3 after 120 h. However, heating the reaction mixture to reflux exclusively leads to the pyridine-ortho-metalated complex 2 in only 30 min. Similarly, complex 3 can be converted completely into 2 upon heating in pyridine for 30 min. Both compounds 2 and 3 were characterized by NMR spectroscopy and X-ray analysis. Both compounds 2 and 3 show a complex dynamic behavior in solution that was investigated by one-dimensional and two-dimensional NMR spectroscopy. Both compounds 2 and 3 show isomerization in solution according to the relative position of the non-bridging pyridine ligands. For 2 the existence of three isomers was shown at equilibrium conditions, 2a (56%) with trans-diaxial, 2b (38%) with cis-diaxial, and 2c (6%) with axial-equatorial arrangement of the non-bridging pyridines. For 3 an equilibrium was detected between two isomers, 3a (67%) with a cis-diaxial and 3b (33%) with a trans-diaxial arrangement of the pyridines.     

Bromine Adsorption and Thermal Stability on Rh(111): A Combined XPS,LEED and DFT Study

This study addresses a fundamental question in surface science: the adsorption of halogens on metal surfaces. Using synchrotron radiation-based high-resolution X-ray photoelectron spectroscopy (XPS), temperature-programmed XPS, low-energy electron diffraction (LEED) and density functional theory (DFT) calculations, we investigated the adsorption and thermal stability of bromine on Rh(111) in detail. The adsorption of elemental bromine on Rh(111) at 170 K was followed in situ by XPS in the Br 3d region, revealing two individual, coverage-dependent species, which we assign to fcc hollow- and bridge-bound atomic bromine. In addition, we find a significant shift in binding energy upon increasing coverage due to adsorbate-adsorbate interactions. Subsequent heating shows a high thermal stability of bromine on Rh(111) up to above 1000 K, indicating strong covalent bonding. To complement the XPS data, LEED was used to study the long-range order of bromine on Rh(111): we observe a (√3×√3)R30° structure for low coverages (≤0.33 ML) and a star-shaped compression structure for higher coverages (0.33–0.43 ML). Combining LEED and DFT calculations, we were able to visualize bromine adsorption on Rh(111) in real space for varying coverages.