Synthesis, structure, characterization, and photophysical studies of a new platinum terpyridyl-based triad with covalently linked donor and acceptor groups

A new terpyridyl-containing Pt triad [Pt(pytpy)(p-CC-C6H4-NH-CO-C6H2(OMe)3)](PF6)2 (4), where pytpy = 4'-(4-pyridin-1-ylmethylphenyl)-[2,2';6',2' ']terpyridine and p-CC-C6H4-NH-CO-C6H2(OMe)3 = N-(4-ethynylphenyl)-3,4,5-trimethoxybenzamide, has been synthesized and structurally characterized. The related donor-chromophore dyad [Pt(ttpy)(p-CC-C6H4-NH-CO-C6H2(OMe)3)]PF6 2, where ttpy = 4'-p-tolyl-[2,2';6',2' ']terpyridine, and the chromophore-acceptor dyad [Pt(pytpy)(CCC6H5)](PF6)2 (3), where CCC6H5 = ethynylbenzene, have also been studied. The multistep syntheses culminate with a CuI-catalyzed coupling reaction of the respective acetylene with either [Pt(ttpy)Cl]PF6 or [Pt(pytpy)Cl](PF6)2. X-ray and spectroscopic studies support assignment of a distorted square planar environment around the Pt(II) ion with three of its coordination sites occupied by the terpyridyl N-donors and the fourth coordination site occupied by the acetylenic carbon. Although the parent compound [Pt(ttpy)(CCC6H5)]PF6 (1) is brightly luminescent in fluid solution at 298 K, dyad 2 as well as triad 4 exhibit complete quenching of the emission. The chromophore-acceptor (C-A) dyad 3 displays weak solution luminescence at room temperature with a phi(rel)(em) of 0.011 (using Ru(bpy)3(2+) as a standard with phi(rel)(em) = 0.062). Electrochemically, the donor-chromophore (D-C) dyad and the donor-chromophore-acceptor (D-C-A) triad exhibit both metal-based and donor ligand-based oxidations, whereas the triad and the C-A dyad show the expected pyridinium- and terpyridine-based reductions. Transient absorption studies of the dyad and triad systems indicate that although the trimethoxybenzene group acts as a reductive donor, in the present system, the pyridinium group fails to act as an acceptor.     

Triphenylphosphonium—Cyanometallate

The derivatives of cyano complex compounds of iron, cobalt and manganese with the triphenylphosphonium-cation were prepared and investigated by IR- andMössbauer-spectroscopic methods. The thermal decomposition of the triphenylphosphonium-cyanometallates leads to intermediates which can be isolated.

Als 6. Mitt. gilt:S. Papp undM. Pál, Magy. Kém. Folyóirat83, 346 (1977).     

Emissions-spektralanalytische Methode zur Bestimmung des Spurenelementgehaltes in geringen Pulvermengen und Lösungen

Zusammenfassung Für die spektrographische und spektrometrische Bestimmung nicht leitender Stoffe wurde ein Elektrodensystem mit Kunststoffbindung entwickelt. In einem Konzentrationsbereich von 0,01–1,0% ließ sich damit der relative Fehler von 4–15% auf 0,5–4,0% herabsetzen. Die Selbstabsorption wird in erheblichem Ausmaß zurückgedrängt; demzufolge werden die Eichkurven in einem größeren Konzentrationsbereich linear.

---

A method of emission spectrum analysis for determining the trace element content in small amounts of powder and solutions

Summary An electrode system with plastic binding was developed for spectrographic and spectrometric determination of non-conducting substances. In a concentration range of 0.01–1.0%, the relative error of 4–15% could thereby be reduced to 0.5–4.0%. The autoabsorption is suppressed to an appreciable extent; in consequence, the calibration curves become linear in a larger concentration range.

     

Studies on fluoride adsorption capacities of amorphous Fe/Al mixed hydroxides from aqueous solutions

This study evaluated the effectiveness of amorphous iron and aluminum mixed hydroxides in removing fluoride from aqueous solutions. A series of mixed Fe/Al samples were prepared at room temperature by co-precipitating Fe and Al mixed salt solutions at pH 7.5. The compositions (Fe:Al molar ratio) of the oxides were varied as 1:0, 3:1, 2:1, 1:1 and 0:1 and the samples were characterized by XRD, BET surface area and pH_ZPC. The XRD studies indicated the amorphous nature of the samples and Al(III) incorporation on Fe(III) hydroxides. Batch adsorption studies for fluoride removal on these materials showed that the adsorption capacities of the materials were highly influenced by solution pH, temperature and initial fluoride concentration. The rate of adsorption was fast and equilibrium was attained within 2 h. The adsorption followed first-order kinetics with intraparticle diffusion as the rate determining step for all the samples. The experimental data fitted well to both Langmuir and Freundlich adsorption isotherms. All samples exhibited very high Langmuir adsorption capacities; the sample with molar ratio 1 has shown maximum adsorption capacity of 91.7 mg/g. The thermodynamic parameters were determined to study the feasibility of the adsorption process.     

The Effect of Water on the 2-Propanol Oxidation Activity of Co-Substituted LaFe1−xCoxO3 Perovskites

Perovskites are interesting oxidation catalysts due to their chemical flexibility enabling the tuning of several properties. In this work, we synthesized LaFe_1−xCo_xO₃ catalysts by co-precipitation and thermal decomposition, characterized them thoroughly and studied their 2-propanol oxidation activity under dry and wet conditions to bridge the knowledge gap between gas and liquid phase reactions. Transient tests showed a highly active, unstable low-temperature (LT) reaction channel in conversion profiles and a stable, less-active high-temperature (HT) channel. Cobalt incorporation had a positive effect on the activity. The effect of water was negative on the LT channel, whereas the HT channel activity was boosted for x>0.15. The boost may originate from a slower deactivation rate of the Co³⁺ sites under wet conditions and a higher amount of hydroxide species on the surface comparing wet to dry feeds. Water addition resulted in a slower deactivation for Co-rich catalysts and higher activity in the HT channel state.     

Preparation of perfluoro‐1,3‐propanedisulfonic acid/Nafion/silica hybrid nanoparticles—thermally stable Nafion in these silica hybrid nanoparticles even after calcination at 800 °C

Perfluoro‐1,3‐propanedisulfonic acid (PFPS)/Nafion/silica hybrid particles were prepared by the sol–gel reactions of PFPS with tetraethoxysilane and silica nanoparticles in the presence of Nafion under alkaline conditions. These obtained composites exhibited a good dispersibility and stability in not only water but also traditional organic media such as methanol, ethanol, 1,2‐dichloroethane, tetrahydrofuran, and dimethyl sulfoxide. Dynamic light scattering measurements and field‐emission scanning electron microscopy show that these hybrid particles are nanometer size‐controlled fine particles before and even after calcination at 800 °C. Nafion/silica hybrid nanoparticles were also prepared in the absence of PFPS under similar conditions. The weight of original Nafion markedly dropped around 350 °C and decomposed gradually, reaching 0% around 450 °C, and Nafion in the Nafion/silica nanocomposites exhibited a similar weight loss behavior to that of the original one. However, Nafion/PFPS/silica hybrid nanoparticles were found to exhibit no weight loss corresponding to the contents of Nafion and PFPS in the silica gel matrices even after calcination at 800 °C. It was demonstrated that the pH value (3.77 at 25 °C) of Nafion/PFPS/silica hybrid nanoparticles after calcination is smaller than that (5.66 at 25 °C) before calcination, and this hybrid nanoparticles exhibited a higher proton conductivity (5.8 × 10^?3 S/cm at 85 °C) than that (4.1 × 10^?3 S/cm at 85 °C) before calcination. In addition, Nafion/PFPS/silica hybrid nanoparticles after calcination at 800 °C were applied to the Friedel‐Crafts acylation of thiophene with acetic anhydride to give the expected 2‐acetylthiophene, of whose yield was similar to that before calcination under similar conditions. These findings suggest that Nafion in PFPS/silica hybrid nanoparticle cores should exhibit a nonflammable characteristic even after calcination at 800 °C to act as an effective acid catalyst. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1869–1877     

Simultaneous Determination of Testosterone and Testosterone Enanthate in Equine Plasma by UHPLC-MS-MS

Testosterone and testosterone enanthate are performance-enhancing substances that are banned in racehorses competing in the State of Pennsylvania (PA). A tolerance concentration of 2,000 pg mL^?1 plasma has been established for testosterone in intact colts and stallions at the time they are competing in PA. Testosterone enanthate is a precursor of testosterone and can be used to boost plasma testosterone concentration above natural, age and seasonally variable plasma concentration. To control abuse, a verifiable method for rapid determination of both substances in equine plasma was needed. For this reason, an ultra high performance liquid chromatography-tandem mass spectrometry method for high-throughput analysis of both analytes in equine plasma was developed. Analytes were recovered from plasma by liquid–liquid extraction using mixture of methyl tert-butyl ether and ethyl acetate (50:50, v/v), separated on a C₁₈ sub-2 μm column and detected on a triple quadrupole mass spectrometer using positive electrospray ionization mode with selected reaction monitoring scan. SRM ion transitions of m/z 289 → m/z 97, m/z 289 → m/z 109, m/z 289 → m/z 79 were used for testosterone identification while m/z 401 → m/z 253, m/z 401 → m/z 271, m/z 401 → m/z 97 were employed for testosterone enanthate. Retention time and product ion intensity ratio were used as confirmation criteria to ascertain the presence of both analytes in equine plasma. The limits of detection, quantification and confirmation were 50 pg 0.5 mL^?1, 100 pg 0.5 mL^?1 and 250 pg 0.5 mL^?1, respectively for both analytes. The method was validated for recovery efficiency, sensitivity, matrix effect, linearity, precision and accuracy. This method is routinely used in the PA program for androgenic anabolic steroids doping control in racehorses and in the on-going testosterone enanthate pharmacokinetics study. The method is defensible, fast, selective, specific and reproducibly reliable.     

Methane Activation by Platinum: Critical Role of Edge and Corner Sites of Metal Nanoparticles

Complete dehydrogenation of methane is studied on model Pt catalysts by means of state‐of‐the‐art DFT methods and by a combination of supersonic molecular beams with high‐resolution photoelectron spectroscopy. The DFT results predict that intermediate species like CH₃ and CH₂ are specially stabilized at sites located at particles edges and corners by an amount of 50–80 kJ mol^?1. This stabilization is caused by an enhanced activity of low‐coordinated sites accompanied by their special flexibility to accommodate adsorbates. The kinetics of the complete dehydrogenation of methane is substantially modified according to the reaction energy profiles when switching from Pt(111) extended surfaces to Pt nanoparticles. The CH₃ and CH₂ formation steps are endothermic on Pt(111) but markedly exothermic on Pt₇₉. An important decrease of the reaction barriers is observed in the latter case with values of approximately 60 kJ mol^?1 for first C? H bond scission and 40 kJ mol^?1 for methyl decomposition. DFT predictions are experimentally confirmed by methane decomposition on Pt nanoparticles supported on an ordered CeO₂ film on Cu(111). It is shown that CH₃ generated on the Pt nanoparticles undergoes spontaneous dehydrogenation at 100 K. This is in sharp contrast to previous results on Pt single‐crystal surfaces in which CH₃ was stable up to much higher temperatures. This result underlines the critical role of particle edge sites in methane activation and dehydrogenation.     

Collision-induced dissociation pathways of anabolic steroids by electrospray ionization tandem mass spectrometry

Anabolic steroids are structurally similar compounds, and their product-ion spectra obtained by tandem mass spectrometry under electrospray ionization conditions are quite difficult to interpret because of poly-ring structures and lack of a charge-retaining center in their chemical structures. In the present study, the fragmentation of nine anabolic steroids of interest to the racing industry was investigated by using triple quadrupole mass spectrometer, Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometer, and a linear ion trap instrument. With the aid of an expert system software (Mass Frontier version 3.0), accurate mass measurements, and multiple stage tandem mass spectrometric (MS(n)) experiments, fragmentation pathways were elucidated for boldenone, methandrostenolone, tetrahydrogestrinone (THG), trenbolone, normethandrolone and mibolerone. Small differences in the chemical structures of the steroids, such as an additional double-bond or a methyl group, result in significantly different fragmentation pathways. The fragmentation pathways proposed in this paper allow interpretation of major product ions of other anabolic steroids reported by other researchers in a recent publication. The proposed fragmentation pathways are helpful for characterization of new steroids. The approach used in this study for elucidation of the fragmentation pathways is helpful in interpretation of complicated product-ion spectra of other compounds, drugs and their metabolites.