Sequential injection chromatographic determination of ambroxol hydrochloride and doxycycline in pharmaceutical preparations

A new separation method based on a novel reversed-phase sequential injection chromatography (SIC) technique was used for simultaneous determination of ambroxol hydrochloride and doxycycline in pharmaceutical preparations in this contribution.The coupling of short monolith with SIA system results in an implementation of separation step to until no-separation low-pressure method.A Chromolith^® Flash RP-18e, 25-4.6 mm column (Merck, Germany) and a FIAlab^® 3000 system (USA) with a six-port selection valve and 5 ml syringe were used for sequential injection chromatographic separations in our study. The mobile phase used was acetonitrile-water (20:90, v/v), pH 2.5 adjusted with 98% phosphoric acid, flow rate 0.48 ml min⁻¹, UV detection was at 213 nm.The validation parameters have shown good results: linearity of determination for both compounds including internal standard (ethylparaben) >0.999; repeatability of determination (R.S.D.) in the range 0.5-5.4% at three different concentration levels, detection limits in the range 0.5-2.0 μg ml⁻¹, and recovery from the pharmaceutical preparation in the range 99.3-99.9%. The chromatographic resolution between peak compounds was >5.0 and analysis time was <9 min under the optimal conditions. The method was found to be applicable for routine analysis of the active compounds ambroxol hydrochloride and doxycycline in various pharmaceutical preparations.     

Determination of rhodamine 123 by sequential injection technique for pharmacokinetic studies in the rat placenta

The sequential injection (SIA) technique was applied in pharmacokinetic studies of the transporter-mediated passage of a model substrate, rhodamine 123 (Rho123), through the dually perfused rat term placenta. The method described was used for real-time monitoring of Rho123 concentrations in both the maternal and fetal compartments. Determination was processed by fluorescence detection (λ_ex=480 nm, λ_em580 nm); calibration curve was linear over the range 0.01–50 μmol l⁻¹ (r=0.99965), detection limit was 10 nmol l⁻¹ (3σ) and RSD2% (10 readings). Transport of Rho123 was scanned under various conditions (ATP-synthesis inhibition) and several inhibitors of P-glycoprotein transporter were tested (e.g. quinidine). The advantages of the modern SIA method—an automated analytical tool providing both fast and precise analysis—were successfully demonstrated for examination of transport profiles to investigate the effect of P-glycoprotein on the placental transfer of Rho123.     

Lab-In-Syringe with Bead Injection Coupled Online to High-Performance Liquid Chromatography as Versatile Tool for Determination of Nonsteroidal Anti-Inflammatory Drugs in Surface Waters

We report on the hyphenation of the modern flow techniques Lab-In-Syringe and Lab-On-Valve for automated sample preparation coupled online with high-performance liquid chromatography. Adopting the bead injection concept on the Lab-On-Valve platform, the on-demand, renewable, solid-phase extraction of five nonsteroidal anti-inflammatory drugs, namely ketoprofen, naproxen, flurbiprofen, diclofenac, and ibuprofen, was carried out as a proof-of-concept. In-syringe mixing of the sample with buffer and standards allowed straightforward pre-load sample modification for the preconcentration of large sample volumes. Packing of ca. 4.4 mg microSPE columns from Oasis HLB^® sorbent slurry was performed for each sample analysis using a simple microcolumn adapted to the Lab-On-Valve manifold to achieve low backpressure during loading. Eluted analytes were injected into online coupled HPLC with subsequent separation on a Symmetry C18 column in isocratic mode. The optimized method was highly reproducible, with RSD values of 3.2% to 7.6% on 20 µg L⁻¹ level. Linearity was confirmed up to 200 µg L⁻¹ and LOD values were between 0.06 and 1.98 µg L⁻¹. Recovery factors between 91 and 109% were obtained in the analysis of spiked surface water samples.     

Sequential injection extraction based on restricted access material for determination of furosemide in serum

Restricted access material (RAM) column containing 25 microm C18 alkyl-diol support was integrated into the sequential injection analysis (SIA) manifold and the SIA-RAM system was tested for direct determination of furosemide in serum. LiChrospher ADS column based on restricted access material is proposed to direct injection of biofluids. The integration of RAM material into SIA enabled creation of a comprehensive on-line sample clean-up technique combined with fluorescence quantitation of analyte. Centrifuged and diluted serum sample was aspirated into the system and loaded onto the column using acetonitrile-water (2:98), pH 2.7. The analyte was retained on the column while proteins contained in the sample were removed to the waste without precipitation and clogging the column. Interfering substances complicating the detection were washed out by acetonitrile-water (15:85), pH 2.7 in the next step. The extracted analyte was eluted by means of acetonitrile-water (25:75), pH 2.3 to the fluorescence detector (emission filter 385 nm). The whole procedure comprising sample pre-treatment, analyte detection and column reconditioning took 20 min. The recoveries of furosemide from serum lay between 101.4 and 103.4% for three concentrations of analyte.     

An overview of sequential injection chromatography

New generation of sequential injection analysis (SIA) called sequential injection chromatography (SIC) has already been consolidated as a good alternative of high performance liquid chromatography (HPLC) for fast analysis of simple samples. Benefits of flow methods are automation, miniaturization and low sample and mobile phase consumption. Implementation of short monolithic chromatographic column into SIA opens new area—on-line chromatographic separation of multi-compound sample in low-pressure flow system, with the advantage of flow programming and possibility of sample manipulation. In the presented review the potential of SIC and its comparison with HPLC for determination of pharmaceutical mixtures is discussed and outlines past and recent trends focused on separation with SIC.     

Sequential injection determination of orthophosphate as ion associate of 12-molybdophosphate with Astra Phloxine

A simple and fast reaction between 12-molybdophosphate heteropoly anion and the polymethine dye Astra Phloxine was used for the development of a new SIA method for the determination of orthophosphate. The suggested method has higher sensitivity and a broader calibration range than existing SIA methods. It can be used to detect phosphate in the range from 0.2 to 10 μmol L⁻¹ with a detection limit of 0.1 μmol L⁻¹ and an acceptable throughput of 20 samples h⁻¹. The comparably low molybdate (5.6 mmol L⁻¹) and dye (0.1 mmol L⁻¹) concentrations led to an improvement in the stability of the base line. Inter-day reproducibility was better than 5%, while the intra-day RSD was in the range 0.8-3.5%. The method was used for the analysis of natural water samples and phosphorus-containing chemicals having a low content of orthophosphate.     

Retention and selectivity of basic drugs on solid-phase extraction sorbents: Application to direct determination of β-blockers in urine

Seven solid phase sorbent materials with reversed-phase, mixed-mode interactions (ion-exchange and reversed-phase), and molecularly imprinted polymers (MIP), namely Oasis HLB, Oasis MAX, Oasis MCX, Bond Elute Plexa, Bond Elute Plexa PAX, Bond Elute Plexa PCX, and SupelMIP sorbents, were investigated. The present study was focused on the retention and elution of pharmaceutically active substances based on several analyte-sorbent interaction properties. Basic drugs, such as β-blockers (i.e., atenolol, pindolol, acebutolol, metoprolol, labetalol, and propranolol) were selected as the model compounds for this study. These compounds are frequently encountered in anti-doping tests. The extraction efficiencies of the individual sorbents were compared based on the recovery of known amounts of the targeted analytes in a metered elution volume (500 μL) in three separate elution fractions. The elution efficiency of the total amount of the target analytes on various sorbents was not appreciably influenced by the volume of eluent required for complete elution. Based on the small matrix effects and clear baseline, SupelMIP was the most suitable sorbent for urine analysis. The relative analyte recoveries of the SPE-HPLC procedure proved satisfactory for the range from 94 % to 105 %, with an RSD ranging from 2 % to 4 %. The regression equations for all of the targeted compounds exhibited excellent linearity (r ² ?>?0.9991) over the range of 10 to 1000 ng mL^–1. The limits of detection and quantification for the selected β-blocker compounds in urine were in the ranges of 0.6 to 2.0 ng mL^–1 and 2.0 to 6.7 ng mL^–1, respectively.     

Advantages of pentafluorophenylpropyl stationary phase over conventional C18 stationary phase--application to analysis of triamcinolone acetonide

A pentafluorophenylpropyl (PFPP) stationary phase was for the first time tested for the simultaneous determination of triamcinolone acetonide, its degradation product triamcinolone and two preservatives, methylparaben, and propylparaben. A new simple isocratic reversed phase HPLC method with UV detection, using estradiol hemihydrate as an internal standard, has been developed and validated. Chromatography was performed on a Discovery HS F5 column (150 mm x 4.6 mm, 5 microm) using a binary mobile phase composed of acetonitrile and water 45:55 (v:v). The flow-rate was 0.6 mL/min, the column temperature 25 degrees C and the UV detection was accomplished at 240 nm. The chromatography results using PFPP stationary phase were compared with those obtained using conventional C18 columns.     

Analysis of phenolic compounds by high performance liquid chromatography and ultra performance liquid chromatography

Two novel chromatographic methods both based on utilization of sub-2-micron particle columns were developed for the analysis of phenolic compounds in this work. An HPLC system was equipped with C(18) silica-based analytical column (50 mm x 4.6 mm, 1.8 microm) and a UPLC system with ethylene-bridged hybrid C(18) analytical column (100 mm x 2.1 mm, 1.7 microm). In total 34 phenolic substances were divided into groups of phenolic acids, flavonoids, catechins and coumarins and were analysed in sequence using different gradient methods. System suitability test data, including repeatability of retention time and peak area, mean values of asymmetry factor, resolution, peak capacity and the height equivalent of a theoretical plate were determined for each gradient method by 10 replicate injections. The developed methods were applied in the analysis of real samples (grape wines, teas).     

Liquid chromatographic-electrospray mass spectrometric determination (LC-ESI-MS) of phase II metabolites of flobufen in rat liver microsomes-Chiral discrimination

Glucuronidation of the non-steroidal anti-inflammatory chiral drug flobufen and its major metabolite M17203 has been implicated as an important mechanism of flobufen elimination. To characterize flobufen metabolism by O-glucuronidation, new liquid chromatographic method (LC) coupled with ESI-MS was developed to detect the conjugates of flobufen and its metabolites formed in vitro in rat liver microsomes. Discovery DSC-18 LT cartridge columns were utilized for solid phase extraction (SPE) and Discovery C18 column (150 mm x 2.1 mm, 5 microm particle size) was used for LC separation. Chiral inversion of flobufen and its metabolites enantiomers was checked by special 1-allyl-(5R,8S,10R)-terguride column (150 mm x 4.6 mm). O-Glucuronidation of the S-enantiomer displayed a typical Michaelis-Menten kinetics, whereas the R-enantiomer exhibited a substrate inhibition type of kinetics. The study of glucuronidation of M17203 led to kinetics with sigmoidal characteristics.