Determination of Arsenic in Food Samples by Hydride Generation – Atomic Absorption Spectrometry

A method for the determination of trace amounts of arsenic in food samples using flow injection analysis and atomic absorption spectrometry with hydride generation (FI-HG AAS) was developed. The parameters of the flow injection system and the hydride generation were optimized with respect to reagent concentrations, atomization temperature, injection volume, reaction coil length and carrier flow rate. The limits of detection and quantification were 0.34µgL^–1 and 1.2µgL^–:1, respectively, and the analytical curve is linear up to 30.0µgL^–1 arsenic. The relative standard deviation for 12 replicates varies between 5% for 4.0µgL^–1 As and 1.8% for 30.0µgL^–1 As, with an injection frequency of up to 135h^–1. Interferences from Ni(II), Cu(II), Fe(III), Cr(III), Mo(II), Bi(III), Se(IV), Se(VI), Sb(III) and Sb(V) could be masked with a mixture of ascorbic acid-KI in a 5.0molL^–1 HCl solution. The accuracy of the proposed method was evaluated by using certified reference materials of biological samples, and the method was used to determine the content of arsenic in fish and coffee beans.     

Relative DNA binding affinity of helix 3 homeodomain analogues, major groove binders, can be rapidly screened by displacement of prebound ethidium bromide. A comparative study

The binding affinity for a 12-bp dsDNA of Antennapedia helix 3 analogues, major groove binders, has been measured by displacement of prebound ethidium bromide, a fluorescent displacement assay proposed for minor groove binders by Boger et al.(J. Am. Chem. Soc., 2000, 122, 6382-6394). Relative binding affinities determined by this method were compared to those obtained by gel mobility shift and footprinting assays for the 12-bp dsDNA and a 178-bp DNA fragment. The present work demonstrates that the fluorescence displacement assay is suitable for rapid screening of major groove binders, even though about 60 to 70% of the prebound ethidium bromide is displaced by these peptides. Total (100%) displacement of ethidium bromide was serendipitously achieved by addition in the peptide sequence, at the N-terminus, of a S-3-nitro-2-pyridinesulfenyl-N-acetyl-cysteine residue. S-3-nitro-2-pyridinesulfenylcysteine was shown to (i) bind to dsDNA with a micromolar affinity and (ii) direct within DNA grooves a peptide with no affinity for dsDNA.     

The general four-dimensional spherically symmetric Finsler space

Finsler geometries give natural generalisations of Riemannian geometries, and hence possible natural extensions of general relativity. In this latter (gravitational) context, it is of particular interest to find the general spherically symmetric Finsler metric on ⁴. In this paper, we derive this metric. The general solution is given in two alternative forms, the second of which allows easy comparison with Riemannian-like metrics. We also derive the general axially symmetric Finsler metric on ⁴.     

Radical Stability Directs Electron Capture and Transfer Dissociation of β‐Amino Acids in Peptides

We report on the characteristics of the radical‐ion‐driven dissociation of a diverse array of β‐amino acids incorporated into α‐peptides, as probed by tandem electron‐capture and electron‐transfer dissociation (ECD/ETD) mass spectrometry. The reported results demonstrate a stronger ECD/ETD dependence on the nature of the amino acid side chain for β‐amino acids than for their α‐form counterparts. In particular, only aromatic (e.g., β‐Phe), and to a substantially lower extent, carbonyl‐containing (e.g., β‐Glu and β‐Gln) amino acid side chains, lead to N? C_β bond cleavage in the corresponding β‐amino acids. We conclude that radical stabilization must be provided by the side chain to enable the radical‐driven fragmentation from the nearby backbone carbonyl carbon to proceed. In contrast with the cleavage of backbones derived from α‐amino acids, ECD of peptides composed mainly of β‐amino acids reveals a shift in cleavage priority from the N? C_β to the C_α? C bond. The incorporation of CH₂ groups into the peptide backbone may thus drastically influence the backbone charge solvation preference. The characteristics of radical‐driven β‐amino acid dissociation described herein are of particular importance to methods development, applications in peptide sequencing, and peptide and protein modification (e.g., deamidation and isomerization) analysis in life science research.     

Spectroscopic investigation of the interaction of p-benzoquinone with casein in the solid state

The reaction between p-benzoquinone (PBQ) and casein (protein) in the solid state was studied. After reaction with protein, the FT-IR spectra showed a new band at 1215 cm^?1, with an intense sign attributed for casein/PBQ product. An optimum amount of PBQ for determination of the product when mixed with casein was 100 mg and a reaction time of 30 min. The product was stable for a period of 24 h after the reacting by heating. The interaction of PBQ with casein was investigated by FT-IR, reflectance, Raman and EPR spectroscopies. The reaction between PBQ and casein in the solid state yields a radical species (p-benzosemiquinone) that it is stabilized by the presence of p-biphenolate and p-benzoquinone species in the solid state.     

Preparation of alpha-diazocarbonyl compounds from beta-lapachone derivatives and other 1,2-naphthoquinones: use of the 2D NMR 1H,15N and 1H,13C HMBC techniques in assigning regiochemistry

The assignment of the diazo site in products of the reaction of p-toluenesulfonylhydrazine with beta-lapachone, 3,4-dihydro-2,2-dimethyl-2H-naphtho[1,2-b]pyran-5,6-dione, and other 1,2-naphthoquinones in methanol solution at room temperature has been accomplished using 1H,13C HMBC and 1H,15N HMBC NMR experiments. Only one diazo-naphthalenone product was isolated in yields ranging from 50-100% from each reaction. The site of diazo substitution of beta-lapachone and derivatives is the 1-position, in contrast to substitution at the 2-position in 4-MeO-1,2-naphthoquinone. Steric factors, rather than electronic factors, control the reaction site. Along with 2-diazo-1(2H)-naphthalenone, an additional product isolated from the reaction of p-toluenesulfonylhydrazide with 1,2-naphthoquinone was 2-diazo-4-hydroxy-1(2H)-naphthalenone. Confirmation of the formation of 6-diazo-2,2-dimethyl-2,3,4,6-tetrahydro-2H-benzo[h]cromen-5-one, obtained from beta-lapachone, was achieved using single crystal X-ray diffraction.     

Efficient synthesis of beta2-amino acid by homologation of alpha-amino acids involving the Reformatsky reaction and Mannich-type imminium electrophile

Development of new methods for the synthesis of beta-amino acids is important as polymers of these compounds are promising peptidomimetic candidates in medicinal chemistry. We report here our findings on a new and highly efficient general strategy for the synthesis of beta2-amino acids by homologation of alpha-amino acids, involving the Reformatsky reaction and Mannich-type imminium electrophile.     

ZnO-coated glass fibers for the analysis of trihalomethanes by headspace-solid phase microextraction-gas chromatography

Li₂O-ZrO₂-BaO-SiO₂ glass fibers were produced and their surfaces were coated with zinc oxide. The fibers’ surface morphology was examined by scanning electron microscopy and the zinc oxide layer was characterized by mapping the K_α and L_α lines of zinc by energy dispersive X-ray spectroscopy. The results indicated that a homogeneous and porous layer of ZnO was formed on the fibers’ surface. This layer was subjected to a simultaneous determination of trihalomethanes using headspace-solid phase microextraction-gas chromatography. The study was conducted after evaluating the ideal time of incubation (15 min), extraction (15 min) and desorption (10 min), as well as the effect of the addition of salt (15%, m/v) on the analytical response. A good linear dynamic range was observed individually for trihalomethanes aqueous solutions containing 20 μg L⁻¹ and 500 μg L⁻¹ of trichloromethane, 15 μg L⁻¹ and 250 μg L⁻¹ of dichlorobromomethane and dibromochloromethane and 10 μg L⁻¹ and 100 μg L⁻¹ of tribromomethane, with all the compounds showing correlation coefficients higher than 0.9900.     

Efficient solvent-free synthesis of thiazolidin-4-ones from phenylhydrazine and 2,4-dinitrophenylhydrazine

An efficient solvent-free synthesis of thiazolidinones from reaction of mercaptoacetic acid, aldehydes (benzaldehyde and valeraldehyde) or ketones (cyclopentanone and cyclohexanone), and hydrazines (phenylhydrazine and 2,4-dinitrophenylhydrazine) is reported. The compounds were generally characterized by spectroscopic techniques and specifically for 2-cyclohexanyl-3-(N-phenyl)-1,3-thiazolidin-4-one by X-ray crystallography.