Highly aminated mesoporous silica nanoparticles with cubic pore structure

Mesoporous silica with cubic symmetry has attracted interest from researchers for some time. Here, we present the room temperature synthesis of mesoporous silica nanoparticles possessing cubic Pm3?n symmetry with very high molar ratios (>50%) of 3-aminopropyl triethoxysilane. The synthesis is robust allowing, for example, co-condensation of organic dyes without loss of structure. By means of pore expander molecules, the pore size can be enlarged from 2.7 to 5 nm, while particle size decreases. Adding pore expander and co-condensing fluorescent dyes in the same synthesis reduces average particle size further down to 100 nm. After PEGylation, such fluorescent aminated mesoporous silica nanoparticles are spontaneously taken up by cells as demonstrated by fluorescence microscopy.     

Functional improvement of porcine neonatal pancreatic cell clusters via conformal encapsulation using an air-driven encapsulator

Transplantation of islet cells into diabetic patients is a promising therapy, provided that the islet cells are able to evade host immune rejection. With improved islet viability, this strategy may effectively reverse diabetes. We applied 2% calcium alginate to generate small and large capsules to encapsulate porcine neonatal pancreatic cell clusters (NPCCs) using an air-driven encapsulator. After encapsulation, the viability was assessed at 1, 4, 7, 14 and 28 days and secretion of functional insulin in response to glucose stimulation were tested at days 14 and 28. Selective permeability of the small alginate capsules was confirmed using various sizes of isothiocyanate-labeled dextran (FITC-dextran). Encapsulation of NPCCs was performed without islet protrusion in the small and large capsules. The viability of NPCCs in all experimental groups was greater than 90% at day 1 and then gradually decreased after day 7. The NPCCs encapsulated in large capsules showed significantly lower viability (79.50 ± 2.88%) than that of naïve NPCCs and NPCCs in small capsule (86.83 ± 2.32%, 87.67 ± 2.07%, respectively) at day 7. The viability of naïve NPCCs decreased rapidly at day 14 (75.67 ± 1.75%), whereas the NPCCs encapsulated in small capsules maintained (82.0 ± 2.19%). After 14 and 28 days NPCCs' function in small capsules (2.67 ± 0.09 and 2.13 ± 0.09) was conserved better compared to that of naïve NPCCs (2.04 ± 0.25 and 1.53 ± 0.32, respectively) and NPCCs in large capsules (2.04 ± 0.34 and 1.13 ± 0.10, respectively), as assessed by a stimulation index. The small capsules also demonstrated selective permeability. With this encapsulation technique, small capsules improved the viability and insulin secretion of NPCCs without islet protrusion.     

Wavelength-dependent properties of photodynamic therapy using hypericin in vitro and in an animal model

Wavelength effects in photodynamic therapy (PDT) with hypericin (HY) were examined in a C26 colon carcinoma model both in vitro and in vivo. Irradiation of HY-sensitized cells in vitro with either 550 or 590 nm caused the loss of cell viability in a drug- and light-dose-dependent manner. The calculated ratio of HY-based PDT (HY-PDT) efficiencies at these two wavelengths was found to correlate with the numerical ratio of absorbed photons at each wavelength. In vivo irradiation of C26-derived tumors, 6 h after intraperitoneal administration of HY (5 mg/kg), caused extensive vascular damage and tumor necrosis. The depth of tumor necrosis (d) was more pronounced at 590 than at 550 nm and increased when the light dose was raised from 60 to 120 J/cm2. The maximal depths of tumor necrosis (at 120 J/cm2) were 7.5+/-1.5 mm at 550 nm and 9.9+/-0.8 mm at 590 nm. Both values are rather high in view of the limited penetration of green-yellow light into the tissue. Moreover, the depth ratio, d590/d550 = 1.3 (P < 0.001), is smaller than expected considering the 2.2-fold lower HY absorbance and the 1.7-fold lower tissue penetration of radiation at 550 than at 590 nm. This finding indicates that in vivo the depth at which HY-PDT elicits tumor necrosis is not only determined by photophysical considerations (light penetration, number of absorbed photons) but is also influenced significantly by other mechanisms such as vascular effects. Therefore, despite the relatively short-wavelength peaks of absorption, our observations suggest that HY is an effective photodynamic agent that can be useful in the treatment of tumors with depths in the range of 1 cm.     

Thermal and photochemical rearrangement of bicyclo[3.1.0]hex-3-en-2-one to the ketonic tautomer of phenol. Computational evidence for the formation of a diradical rather than a zwitterionic intermediate

The ground state (S(0)) and lowest-energy triplet state (T(1)) potential energy surfaces (PESs) concerning the thermal and photochemical rearrangement of bicyclo[3.1.0]hex-3-en-2-one (8) to the ketonic tautomer of phenol (11) have been extensively explored using ab initio CASSCF and CASPT2 calculations with several basis sets. State T(1) is predicted to be a triplet pipi lying 66.5 kcal/mol above the energy of the S(0) state. On the S(0) PES, the rearrangement of 8 to 11 is predicted to occur via a two-step mechanism where the internal cyclopropane C-C bond is broken first through a high energy transition structure (TS1-S(0)()), leading to a singlet intermediate (10-S(0)()) lying 25.0 kcal/mol above the ground state of 8. Subsequently, this intermediate undergoes a 1,2-hydrogen shift to yield 11 by surmounting an energy barrier of only 2.7 kcal/mol at 0 K. The rate-determining step of the global rearrangement is the opening of the three-membered ring in 8, which involves an energy barrier of 41.2 kcal/mol at 0 K. This high energy barrier is consistent with the fact that the thermal rearrangement of umbellulone to thymol is carried out by heating at 280 degrees C. Regarding the photochemical rearangement, our results suggest that the most efficient route from the T(1) state of 8 to ground state 11 is the essentially barrierless cleavage of the internal cyclopropane C-C bond followed by radiationless decay to the S(0) state PES via intersystem crossing (ISC) at a crossing point (S(0)()/T(1)()-1) located at almost the same geometry as TS1-S(0)(), leading to the formation of 10-S(0)() and the subsequent low-barrier 1,2-hydrogen shift. The computed small spin-orbit coupling between the T(1) and S(0) PESs at S(0)()/T(1)()-1 (1.2 cm(-)(1)) suggests that the ISC between these PESs is the rate-determining step of the photochemical rearrangement 8 --> 11. Finally, computational evidence indicates that singlet intermediate 10-S(0)() should not be drawn as a zwitterion, but rather as a diradical having a polarized C=O bond.     

A common method for the determination of several calcium channel blockers using an HPLC system with ultraviolet detection

We report a common HPLC method for the single or simultaneous determination of four calcium channel blockers (CCB), namely diltiazem (DTZ), verapamil (VER), nifedipine (NIF) and nitrendipine (NIT) and their active metabolites demetildiltiazem and deacetildiltiazem (MA and M1), norverapamil (NOR), and dehydronifedipine (DHN). DHN was first synthesised in our laboratory and different pH values of the mobil phase were subsequently prepared and tested for chromatographic separation. The detection system and the environmental light conditions were optimised. The best separations of all analytes were obtained using a C₁₈ column and a mobile phase of methanol, 0.04 M ammonium acetate, acetonitrile and triethylamine (2:2:1:0.04 v/v). Quantitation was performed using imipramine (IMI) as the internal standard. For DTZ and its metabolites (M1 and MA), the wavelength chosen was 237 nm; for VER and its metabolite NOR, it was 210 nm; and, finally for NIF and its metabolite DHN and NIT it was 216 nm. When a simultaneous analysis was carried out the wavelength was of 230 nm. The optimum pH were 7.90 and 7.10 when the separation of NIT and DTZ or VER and NIF were carried out, respectively, and 7.90 when a simultaneous separation was carried out. The detection limit of the assay was less than 8 ng ml⁻¹ for all compounds, with coefficients of variation less than 7% (for inter- and intra-day) over the concentration range of 1–1000 ng ml⁻¹. The retention times were less than 11 min. When NIF or NIT were studied, it was necessary to use a sodium vapour lamp in order to avoid the photodegradation which takes place under daylight conditions.     

π Aromaticity and Three‐Dimensional Aromaticity: Two sides of the Same Coin?

A bridge between classical organic polycyclic aromatic hydrocarbons (PAH) and closo borohydride clusters is established by showing that they share a common origin regulated by the number of valence electrons in an electronic confined space. Application of the proposed electronic confined space analogy (ECSA) method to archetypal PAHs leads to the conclusion that the 4n+2 Wade–Mingos rule for three‐dimensional closo boranes is equivalent to the (4n+2)π Hückel rule for two‐dimensional PAHs. More importantly, use of ECSA allows design of new interesting fused closo boranes which can be a source of inspiration for synthetic chemists.     

Biomimetic versus enzymatic high-potential electrocatalytic reduction of hydrogen peroxide on a functionalized carbon nanotube electrode

We report the non-covalent functionalization of a multi-walled carbon nanotube (MWCNT) electrode with a biomimetic model of the horseradish peroxidase (HRP) active site. By modifying the MWCNT electrode surface with imidazole-modified polypyrrole, a new biomimetic complex of HRP was synthesized on the MWCNT sidewalls via the coordination of imidazole (Im) to the metal centre of iron protoporphyrin IX, affording (Im)(PP)Fe^III. Compared to the pi-stacking of non-coordinated (PP)Fe^III on a MWCNT electrode, the (Im)(PP)Fe^III-modified MWCNT electrode exhibits higher electrocatalytic activity with an I _max = 0.52 mA cm^–2 for the reduction of H₂O₂, accompanied by a high onset potential of 0.43 V vs. Ag/AgCl. The performances of these novel surface-confined HRP mimics were compared to those of a MWCNT electrode modified by HRP. Although the enzyme electrode displays a higher electrocatalytic activity towards H₂O₂ reduction, the (Im)(PP)Fe^III-modified MWCNT electrode exhibits a markedly higher operational stability, retaining 63% of its initial activity after one month.     

Structural and morphological studies on the deformation behavior of polypropylene/multi‐walled carbon nanotubes nanocomposites prepared through ultrasound‐assisted melt extrusion process

Structural and morphological behavior under stress–strain of polypropylene/multi‐walled carbon nanotubes (PP/MWCNTs) nanocomposites prepared through ultrasound‐assisted melt extrusion process was studied by means of optical microscopy, scanning electron microscopy, transmission electron microscopy, Raman spectroscopy, small angle X‐ray scattering (SAXS), and wide angle X‐ray scattering (WAXS). A high ductile behavior was observed in the PP/MWCNT nanocomposites with low concentration of MWCNTs. This was related to an energy‐dissipating mechanism, achieved by the formation of an ordered PP‐CNTs interphase zone and crystal oriented structure in the undeformed samples. Different strain‐induced‐phase transformations were observed by ex situ SAXS/WAXS, characterizing the different stages of structure development during the deformation of PP and PP/MWCNTs nanocomposites. The high concentration of CNTs reduced the strain behavior of PP due to the agglomeration of nanoparticles. A structural pathway relating the deformation‐induced phase transitions and the dissipation energy mechanism in the PP/MWCNTs nanocomposites at low concentration of nanoparticles was proposed. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 475–491     

Ordered nanostructured ceramic–metal composites through multifunctional block copolymer-metal nanoparticle self-assembly

A novel strategy for fabrication of ordered ceramic–metal nanocomposites was demonstrated by multifunctional block copolymer/metal nanoparticle self-assembly. Hybrid organic–inorganic block copolymer poly(3-methacryloxypropyl-T8-heptaisobutyl-polyhedral oligomeric silsesquioxane-block-N,N-dimethylaminoethyl methacrylate) was synthesized and used as a bi-functional structure directing agent for ligand-stabilized platinum nanoparticles to form ordered organic–inorganic nanocomposites with dense loading of inorganic species in both microphase separated domains. Subsequently, thin films of the hybrid material were converted to ordered silica (ceramic)–platinum (metal) nanocomposites via UV-assisted ozonolysis. This is the first time ordered ceramic–metal nanocomposites were achieved through a bottom-up approach, opening up opportunities for the design and synthesis of a broad range of ordered inorganic–inorganic nanocomposites.