Covalent crosslinking of 1-D photonic crystals of microporous Si by hydrosilylation and ring-opening metathesis polymerization

Free-standing porous Si multilayer dielectric mirrors, prepared by electrochemical etching of crystalline Si, are treated with a ruthenium ring-opening metathesis polymerization (ROMP) catalyst followed by norbornene to produce flexible, stable composite materials in which poly(norbornene) is covalently attached to the porous Si matrix.     

Sequential injection analysis system for on-line monitoring of l-cysteine concentration in biological processes

A sequential injection analysis (SIA) system was developed to monitor the concentration of l-cysteine in biological processes on-line. It is based on the redox reaction of l-cysteine with iron(III) in the presence of 1,10-phenanthroline (phen) and the detection of the red-iron(II)-phen complex with a spectrophotometry. The system was fully automated using software written in the LabVIEW™ development environment. A number of system variables such as the flow rate of the carrier buffer solution, the volume ratio of the sample to the reagents, and the reaction coil length, etc., were evaluated to increase the sensitivity and performance of the SIA system. Under partially optimized operating conditions the performance of the SIA system was linear up to a concentration of l-cysteine of 1 mM (R² = 0.998) with a detection limit of 0.005 mM and a sample frequency of 15 hr⁻¹. The SIA system was employed to monitor the concentration of l-cysteine on-line in a continuously stirred reactor and a fermentation process of Saccharomyces cerevisiae. The on-line monitored data were in good agreement with the off-line data measured by a HPLC with a fluorescence detector (n = 15, R² = 09899).     

Unique Fluxional Behavior. Synthesis, Structure, and Properties of Novel (Diamine)platinum(II) Complexes of 9-Fluorenylidene- and Benzhydrylidenemalonate Ligands

New (diamine)platinum(II) complexes A(2)PtX(2) (A(2) = trans-(+/-)-1,2-diaminocyclohexane (DACH), tetrahydro-4H-pyran-4,4-diylbis(methylamine)(THPDMA); X(2) = 9-fluorenylidenemalonate(FM), benzhydrylidenemalonate(BHM)) have been synthesized and characterized by means of multinuclear NMR spectroscopy and X-ray analysis. (DACH)Pt(FM) crystallizes in space group P2(1)/c with eight formula units in a cell of dimensions a = 20.071(7) ?, b = 12.717(3) ?, c = 24.512(6) ?, beta = 103.25(2) degrees, and V = 6090(3) ?.(3) (DACH)Pt(BHM) crystallizes in space group P&onemacr; with four molecular units in a cell of dimensions a = 11.048(3) ?, b = 13.639(3) ?, c = 14.043(6) ?, alpha = 90.17(3) degrees, beta = 91.31(4) degrees, gamma = 89.98(3) degrees, and V = 2116(1) ?(3). The platinum atom in both complexes adopts a typical square planar arrangement with two nitrogen atoms in cis position. The 9-fluorenylidene and benzhydrylidene groups of the amine ligands chelated to platinum are strikingly bent up by 88.8(3) and 80.8(2) degrees, respectively, from the platinum square plane in the solid state. Variable temperature (1)H NMR spectra of the title complexes in dimethyl sulfoxide solution reveals that the amine proton resonances are sensitive to the fluxional motion of the remote arylidene groups, and suggests that interconversion occurs between two "bent-up" and "bent-down" forms. The prominent difference between the FM and BHM complexes is observed in solution, due to the presence or absence of the angle constraint of the anionic coligands.     

Solid-state ion-selective electrodes for the potentiometric determination of hexacyanoferrate (II)

Hexacyanoferrate(II)-sensing electrodes were prepared by mixing Ag₂S and Ag₄Fe (CN)₆. The 6:1 Ag₂S/Ag₄Fe (CN)₆ provided the best potentiometric response and speed of response. The log concentration vs. potential curves were linear with Nernstian slope (14.8 mV/decade) over the range 10^?1-10^?6 M hexacyanoferrate (II) at pH 7.00 with constant ionic strength. Interferences included iodide, sulfide and bromide. This electrode was used as indicator in potentiometric titrations of hexacyanoferrate (II).     

Copper-catalyzed aerobic oxidative dehydrogenation for conversion of 2-(alkylthio)-1,4-dihydropyrimidines to 2-(alkylthio)pyrimidines

A simple and efficient aerobic oxidative dehydrogenation reaction method for the conversion of 2-(alkylthio)-1,4-dihydropyrimidines to 2-(alkylthio)pyrimidines using copper catalyst with no additives, such as an oxidant, acid, or base, has been developed. The reaction was successful with a wide range of 2-(alkylthio)-1,4-dihydropyrimidine substrates.     

Blue Luminescence of Dendrimer‐Encapsulated Gold Nanoclusters

Direct evidence for the blue luminescence of gold nanoclusters encapsulated inside hydroxyl‐terminated polyamidoamine (PAMAM) dendrimers was provided by spectroscopic studies as well as by theoretical calculations. Steady‐state and time‐resolved spectroscopic studies showed that the luminescence of the gold nanoclusters consisted largely of two electronic transitions. Theoretical calculations indicate that the two transitions are attributed to the different sizes of the gold nanoclusters (Au₈ and Au₁₃). The luminescence of the gold nanoclusters was clearly distinguished from that of the dendrimers.     

Asymptotic Formulas for Two Continued Fractions in Ramanujan's Lost Notebook

On page 45 of his lost notebook, Ramanujan recorded two asymptoticformulas for two continued fractions involving the Riemann zeta-functionand Dirichlet L-functions. The paper proves a more general theoremand derives Ramanujan's claims as a corollary of the theorem.     

Mass spring lattice modeling of the scanning laser source technique

The scanning laser source (SLS) technique is a promising new laser ultrasonic tool for the detection of small surface-breaking defects. The SLS approach is based on monitoring the changes in laser generated ultrasound as a laser source is scanned over a defect. Changes in amplitude and frequency content have been observed for ultrasound generated by the laser over uniform and defective areas. In this paper, the SLS technique is simulated numerically using the mass spring lattice model. Thermoelastic laser generation of ultrasound in an elastic material is modeled using a shear dipole distribution. The spatial and temporal energy distribution profiles of typical pulsed laser sources are used to model the laser source. The amplitude and spectral variations in the laser generated ultrasound as the SLS scans over a large aluminum block containing a small surface-breaking crack are observed. The experimentally observed SLS amplitude and spectral signatures are shown to be captured very well by the model. In addition, the possibility of utilizing the SLS technique to size surface-breaking cracks that are sub-wavelength in depth is explored.     

Two-phase partition chromatography using soybean oil eliminates pesticide residues in aqueous ginseng extract

This study was carried out to develop a cost-, labor- and efficiency-effective elimination method of pesticide residues in ginseng extract. A two-phase partition method between soybean oil and distilled water or aqueous ginseng extract was employed for the elimination of pesticide residues. Content of the pesticides was determined by gas chromatography with electron capture or nitrogen phosphorus detector. A total of 15 pesticides representing four categories (organochlorine, organophosphorus, carbamate, pyrethroid) were spiked (ca. 2 ppm) to 2 ml soybean oil in a test tube and the oil was mixed with 6 ml distilled water or 10% aqueous ginseng extract. The test tubes were then vortexed (2 min) and centrifuged at 3000 rpm for 15 min to separate the oil and aqueous layers. Each layer was harvested and subjected to quantitative analysis of pesticides. The average distribution ratio of the pesticides to the oil layer was 94.4 +/- 6.7% in the mixture of the oil and distilled water, and 105.5 +/- 6.6% in the mixture of the oil and ginseng extract. No significant qualitative and quantitative change of ginsenosides, the active ingredients of Panax ginseng, was observed in the ginseng extract before and after the oil treatment. These results suggest that two-phase partition chromatography between soybean oil and the aqueous phase is a cost-, labor- and efficiency-effective reliable method for the elimination of pesticide residues in ginseng extract.