A new Li-Al-N-H system for reversible hydrogen storage

Complex metal hydrides are considered as a class of candidate materials for hydrogen storage. Lithium-based complex hydrides including lithium alanates (LiAlH(4) and Li(3)AlH(6)) are among the most promising materials owing to its high hydrogen content. In the present work, we investigated dehydrogenation/rehydrogenation reactions of a combined system of Li(3)AlH(6) and LiNH(2). Thermogravimetric analysis (TGA) of Li(3)AlH(6)/3LiNH(2)/4 wt % TiCl(3)-(1)/(3)AlCl(3) mixtures indicated that a large amount of hydrogen (approximately 7.1 wt %) can be released between 150 degrees C and 300 degrees C under a heating rate of 5 degrees C/min in two dehydrogenation reaction steps. The results also show that the dehydrogenation reaction of the new material system is nearly 100% reversible under 2000 psi pressure hydrogen at 300 degrees C. Further, a short-cycle experiment has demonstrated that the new combined material system of alanates and amides can maintain its hydrogen storage capacity upon cycling of the dehydrogenation/rehydrogenation reactions.     

Decarboxylative cross-couplings of 2-aminopyrimidine-5-carboxylic acids

Decarboxylative CC cross-couplings of 2-aminopyrimidine-5-carboxylic acids under a Pd/Ag-based catalytic system opens a new platform for the introduction of diverse C5 substituents. The reaction methods proceeded efficiently with a wide range of the acids and the coupling partners of aryl iodides, alkenes, bromoalkynes, and azoles. Considering ready availability of 2-aminopyrimidine-5-carboxylic acid from the oxidative dehydrosulfurative CN cross-coupling of the 3,4-dihydropyrimidin-1H-2-thiones, this reaction method unambiguously pave a shortcut to densely substituted 2-aminopyrimidine derivatives with unprecedented diversity.     

Observation of negative charge trapping and investigation of its physicochemical origin in newly synthesized poly(tetraphenyl)silole siloxane thin films

A new kind of organic-inorganic hybrid polymer, poly(tetraphenyl)silole siloxane, was invented and synthesized for realization of its unique charge trap properties. The organic portions consisting of (tetraphenyl)silole rings were responsible for negative charge trapping, while the Si-O-Si inorganic linkages provided the intrachain energy barrier for controlling electron transport. The polysilole siloxane dielectric thin films were fabricated by spin-coating and curing of the polymers, followed by characterization with spectroscopic ellipsometry (SE), near edge X-ray absorption fine structure spectroscopy (NEXAFS), and photoemission spectroscopy (PES). The abrupt increase in density and decrease in thickness of the thin film at a curing temperature of 100 °C was attributed to a thermodynamically preferred state in the nanoscopic arrangement of the polymer chains; this was due to cofacial π-π interactions in a skewed manner between peripheral phenyl groups of the (tetraphenyl)silole rings of the adjacent polymer chains. Using the NEXAFS spectrum to assess high electron affinity, the LUMO energy level of the dielectric thin film cured at 150 °C was positioned 1 eV above the Fermi energy level (E(F)). The electron trapping of the dielectric thin films was confirmed from the positive flat band shift (ΔV(FB)) in the capacitance-voltage (C-V) measurements performed within the metal-insulator-semiconductor (MIS) device structure, which strongly verified the polymer design concept. From the simple kinetics model of the electron transport, it was proposed that the flat band shift (ΔV(FB)) or trap density of the negative charges (|ρ|) was logarithmically proportional to the decay constant (β) for the electron-tunneling process. When a phenyl group of a silole ring in a polymer chain was inserted into the two available phenyl groups of another silole ring in another polymer chain, the electron transfer between the groups was enhanced, decreasing the trap density of the negative charges (|ρ|). For the thermodynamically preferred state generating the high refractive index, the distance between the two phenyl groups of the adjacent polymer chains was estimated to be in the range of 0.27-0.36 nm.     

Tunable magnetic arrangement of iron oxide nanoparticles in situ synthesized on the solid substrate from diblock copolymer micelles

Hexagonal arrangement of iron oxide nanoparticles was fabricated by utilizing a single-layered film of diblock copolymer micelles. The synthesis was directly performed on the solid substrate by oxygen plasma with preserving the dimensional order of micelles so that separate procedures for synthesis and deposition of nanoparticles were not necessary. Since the oxygen plasma treatment also eliminated polymers, pure patterns of iron oxide nanoparticles were obtained. Moreover, easy control over the size of nanoparticles enabled us to selectively create a ferrimagnetic or a superparamagnetic pattern of iron oxide nanoparticles without altering the fabrication process.     

Two-phase partition chromatography using soybean oil eliminates pesticide residues in aqueous ginseng extract

This study was carried out to develop a cost-, labor- and efficiency-effective elimination method of pesticide residues in ginseng extract. A two-phase partition method between soybean oil and distilled water or aqueous ginseng extract was employed for the elimination of pesticide residues. Content of the pesticides was determined by gas chromatography with electron capture or nitrogen phosphorus detector. A total of 15 pesticides representing four categories (organochlorine, organophosphorus, carbamate, pyrethroid) were spiked (ca. 2 ppm) to 2 ml soybean oil in a test tube and the oil was mixed with 6 ml distilled water or 10% aqueous ginseng extract. The test tubes were then vortexed (2 min) and centrifuged at 3000 rpm for 15 min to separate the oil and aqueous layers. Each layer was harvested and subjected to quantitative analysis of pesticides. The average distribution ratio of the pesticides to the oil layer was 94.4 +/- 6.7% in the mixture of the oil and distilled water, and 105.5 +/- 6.6% in the mixture of the oil and ginseng extract. No significant qualitative and quantitative change of ginsenosides, the active ingredients of Panax ginseng, was observed in the ginseng extract before and after the oil treatment. These results suggest that two-phase partition chromatography between soybean oil and the aqueous phase is a cost-, labor- and efficiency-effective reliable method for the elimination of pesticide residues in ginseng extract.     

Unique Fluxional Behavior. Synthesis, Structure, and Properties of Novel (Diamine)platinum(II) Complexes of 9-Fluorenylidene- and Benzhydrylidenemalonate Ligands

New (diamine)platinum(II) complexes A(2)PtX(2) (A(2) = trans-(+/-)-1,2-diaminocyclohexane (DACH), tetrahydro-4H-pyran-4,4-diylbis(methylamine)(THPDMA); X(2) = 9-fluorenylidenemalonate(FM), benzhydrylidenemalonate(BHM)) have been synthesized and characterized by means of multinuclear NMR spectroscopy and X-ray analysis. (DACH)Pt(FM) crystallizes in space group P2(1)/c with eight formula units in a cell of dimensions a = 20.071(7) ?, b = 12.717(3) ?, c = 24.512(6) ?, beta = 103.25(2) degrees, and V = 6090(3) ?.(3) (DACH)Pt(BHM) crystallizes in space group P&onemacr; with four molecular units in a cell of dimensions a = 11.048(3) ?, b = 13.639(3) ?, c = 14.043(6) ?, alpha = 90.17(3) degrees, beta = 91.31(4) degrees, gamma = 89.98(3) degrees, and V = 2116(1) ?(3). The platinum atom in both complexes adopts a typical square planar arrangement with two nitrogen atoms in cis position. The 9-fluorenylidene and benzhydrylidene groups of the amine ligands chelated to platinum are strikingly bent up by 88.8(3) and 80.8(2) degrees, respectively, from the platinum square plane in the solid state. Variable temperature (1)H NMR spectra of the title complexes in dimethyl sulfoxide solution reveals that the amine proton resonances are sensitive to the fluxional motion of the remote arylidene groups, and suggests that interconversion occurs between two "bent-up" and "bent-down" forms. The prominent difference between the FM and BHM complexes is observed in solution, due to the presence or absence of the angle constraint of the anionic coligands.     

Sequential injection analysis system for on-line monitoring of l-cysteine concentration in biological processes

A sequential injection analysis (SIA) system was developed to monitor the concentration of l-cysteine in biological processes on-line. It is based on the redox reaction of l-cysteine with iron(III) in the presence of 1,10-phenanthroline (phen) and the detection of the red-iron(II)-phen complex with a spectrophotometry. The system was fully automated using software written in the LabVIEW™ development environment. A number of system variables such as the flow rate of the carrier buffer solution, the volume ratio of the sample to the reagents, and the reaction coil length, etc., were evaluated to increase the sensitivity and performance of the SIA system. Under partially optimized operating conditions the performance of the SIA system was linear up to a concentration of l-cysteine of 1 mM (R² = 0.998) with a detection limit of 0.005 mM and a sample frequency of 15 hr⁻¹. The SIA system was employed to monitor the concentration of l-cysteine on-line in a continuously stirred reactor and a fermentation process of Saccharomyces cerevisiae. The on-line monitored data were in good agreement with the off-line data measured by a HPLC with a fluorescence detector (n = 15, R² = 09899).     

Characterization of amiodarone metabolites and impurities using liquid chromatography/atmospheric pressure chemical ionization mass spectrometry

Using the high performance liquid chromatography/atmospheric pressure chemical ionization tandem mass spectrometry (HPLC/APCI-MS/MS) technique, together with established trends from the literature, the structures of metabolites and impurities of amiodarone, an anti-arrhythmic drug, have been assigned. By comparing analyses of products of incubation with rat liver microsomes with controls in which glucose 6-phosphate dehydrogenase was omitted, metabolites could be distinguished from impurities. Structures for the two proposed metabolites and four impurities are proposed.