Amplifiers and Lasers in PCF Configurations

In this paper we will present an overview of the use of photonic crystal fibers as fiber amplifiers. We will describe the basic concepts of optical amplification, and how to do numerical modelling of such components. We will then identify advantages and disadvantages of amplifiers based on PCF technology compared to conventional fibers, and then go into greater detail on some of these specific applications, such as low pump power amplifiers, and high-power double-clad amplifiers and lasers.     

Dynamics and spectra of excited states of water-micellar suspensions of single-walled carbon nanotubes

The dynamics of the photoinduced differential absorption and excited-state bleaching spectra of single-walled carbon nanotubes suspended in a micellar solution were studied in the spectral range from 40 to 1000 nm within a time interval from 70 fs to 150 ps under excitation by 50-fs pulses with photon energies 2 and 4 eV. The bleaching and absorption bands were observed in the spectra; the positions of the bleaching peaks were independent of the photon energy of the exciting femtosecond pulse in the range 2–4 eV. It was established that, for delay times shorter than 1 ps, the shape of the differential spectrum of excited nanotubes coincided with the shape of the second derivative of the absorption spectrum of unexcited nanotubes in the frequency range of exciting pulse above 18000 cm^?1 (the range of absorption bands of metallic nanotubes). In the frequency range below 16000 cm^?1 (the range of absorption peaks of semiconducting nanotubes), the bleaching peaks in the differential spectrum of excited nanotubes undergo a high-frequency shift of 200–300 cm^?1 with respect to the second-derivative spectrum of unexcited nanotubes. The excited-state relaxation rate constants were measured. They are well approximated by the exponential dependences and depend on the probe-pulse wavelength. An assumption was made about the nature of the observed spectra of excited nanotubes and about the excitation relaxation.     

Measurement of apex angle of the prism using total internal reflection

Total internal reflection technique is examined critically for the measurement of apex angle of the prism. Recognition of the critical boundary completely specifies the apex angle ‘A’ of the prism by keeping constant the ratio of refractive index of sample fluid (n₁=1.4) to that of glass (n₂=1.7). Recording of observations in the laboratory is dependent upon whether the apex angle ‘A’ of prism is greater than or less than or equal to critical angle ‘r_c’. The minimum value of error function ‘χ’ in the proximity of Abbe angle explain the choice of Abbe type instruments and shown invariant by relating positive ‘₊’ and the negative angle of emergence ‘₋’. Using ray-tracing technique, an expression for the length of the critical boundary ‘l’ is derived and is shown as a measure of the apex angle ‘A’ of the prism.

The choice of the realistic grazing condition leads us to two turning points for which error function ‘χ’ is minimal and yields appropriate option of the measurement of apex angle ‘A’ of the prism. It is further shown that the small error ‘ζ’ crept in the apex angle ‘A’ of the prism can lead to a significant error in the design of Pulfrich type instruments.

Experimental measurements are in-line with the predictions made.     

Index Heuristics for Multiclass M/G/1 Systems with Nonpreemptive Service and Convex Holding Costs

We consider the optimal service control of a multiclass M/G/1 queueing system in which customers are served nonpreemptively and the system cost rate is additive across classes and increasing convex in the numbers present in each class. Following Whittle's approach to a class of restless bandit problems, we develop a Langrangian relaxation of the service control problem which serves to motivate the development of a class of index heuristics. The index for a particular customer class is characterised as a fair charge for service of that class. The paper develops these indices and reports an extensive numerical investigation which exhibits strong performance of the index heuristics for both discounted and average costs.     

Liquid Ion-Selective Electrodes for Determining Nonionic Surfactants

It was shown that nonionic surfactants (NS) can be determined by potentiometry using liquid NS-selective electrodes. The effect of medium acidity and foreign substances on the operation of liquid NS-selective electrodes was studied. Some properties of NS-selective electrodes were determined.     

Unsteady motion in single-line flow-injection systems

Unsteady motion in single-line flow-injection systems consisting of n tubular elements with valve or hydrodynamic injection is studied theoretically. A formula for the duration of the initial period of unsteady flow is derived. This initial period is much shorter than the mean residence time of the analyte in practical systems. It can therefore be neglected in mathematical modelling of such systems. Experimental data obtained with single-line systems with valve and hydrodynamic injection confirmed the validity of the theoretical equations.     

Reciprocating sliding wear behavior of laser-clad small amplitude Mo2Ni3Si/NiSi metal silicide composite coatings

Mo₂Ni₃Si/NiSi metal silicide composite coatings with a fine microstructure consisting of Mo₂Ni₃Si primary dendrites and the interdendritic Mo₂Ni₃Si/NiSi eutectics were fabricated on austenitic stainless steel AISI 321 by laser cladding process. Small amplitude reciprocating sliding wear resistance of the coatings is evaluated as functions of normal load and slip amplitude and the wear mechanisms were discussed based on worn surface morphology observations. Results showed that the Mo₂Ni₃Si/NiSi coatings have excellent small amplitude reciprocating sliding wear resistance.     

Elliptic equations with BMO coefficients in Reifenberg domains

The inhomogeneous Dirichlet problems concerning divergence form elliptic equations are studied. Optimal regularity requirements on the coefficients and domains for the W^1,p theory, 1 < p < ∞, are obtained. The principal coefficients are supposed to be in the John‐Nirenberg space with small BMO seminorms. The domain is a Reifenberg domain. These conditions for the W^1,p theory not only weaken the requirements on the coefficients but also lead to a more general geometric condition on the domains. In fact, these domains might have fractal dimensions. © 2004 Wiley Periodicals, Inc.     

A new reaction of phosphorylated N-sulfonylimines with hydrophosphoryl agents involving C → N transfer of phosphoryl groups

Hydrophosphoryl nucleophilic agents add to the CN bond of N-sulfonyltrichloroacetimidoylphosphonates to give unstable C,C-diphosphorylated adducts, which undergo competitive 1,2-C → N phosphorotropic rearrangement and dehydrochlorination with the formation of aza-Perkow reaction products, C,N-diphosphorylated dichlorovinylsulfonamides. This is the first reliably identified case of an aza-Perkow transformation for acid phosphites and their initial nucleophilic attack at the C atom of the azomethine bond in the aza-substrates.     

Crystallization and morphology of poly(vinylidene fluoride)/poly(3‐hydroxybutyrate) blends. I. Spherulitic morphology and growth by polarized microscopy

The development of the poly(3‐hydroxybutyrate) (PHB) morphology in the presence of already existent poly(vinylidene fluoride) (PVDF) spherulites was studied by two‐stage solidification with two separate crystallization temperatures. PVDF formed irregular dendrites at lower temperatures and regular, banded spherulites at elevated temperatures. The transition temperature of the spherulitic morphology from dendrites to regular, banded spherulites increased with increasing PVDF content. A remarkable amount of PHB was included in the PVDF dendrites, whereas PHB was rejected into the remaining melt from the banded spherulites. When PVDF crystallized as banded spherulites, PHB could consequently crystallize only around them, if at all. In contrast, PHB crystallized with a common growth front, starting from a defined site in the interfibrillar regions of volume‐filling PVDF dendrites. It formed by itself dendritic spherulites that included a large number of PVDF spherulites. For blends with a PHB content of more than 80 wt %, for which the PVDF dendrites were not volume‐filling, PHB first formed regular spherulites. Their growth started from outside the PVDF dendrites but could later interpenetrate them, and this made their own morphology dendritic. These PHB spherulites melted stepwise because the lamellae inside the PVDF dendrites melted at a lower temperature than those from outside. This reflected the regularity of the two fractions of the lamellae because that of those inside the dendrites of PVDF was controlled by the intraspherulitic order of PVDF, whereas that from outside was only controlled by the temperature and the melt composition. The described morphologies developed without mutual nucleating efficiency of the components. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 873–882, 2003