The Development of Boronic Acids as Sensors and Separation Tools

Synthetic receptors for diols that incorporate boronic acid motifs have been developed as new sensors and separation tools. Utilizing the reversible interactions of diols with boronic acids to form boronic esters under new binding regimes has provided new hydrogel constructs that have found use as dye‐displacement sensors and electrophoretic separation tools; similarly, molecular boronic‐acid‐containing chemosensors were constructed that offer applications in the sensing of diols. This review provides a somewhat‐personal perspective of developments in boronic‐acid‐mediated sensing and separation, placed in the context of the seminal works of others in the area, as well as offering a concise summary of the contributions of the co‐authors in the area. DOI 10.1002/tcr.201200006     

Gas sensing with nano-indium oxides (In2O3) prepared via continuous hydrothermal flow synthesis

A rapid, clean, and continuous hydrothermal route to the synthesis of ca. 14 nm indium oxide (In(2)O(3)) nanoparticles using a superheated water flow at 400 °C and 24.1 MPa as a crystallizing medium and reagent is described. Powder X-ray diffraction (XRD) of the particles revealed that they were highly crystalline despite their very short time under hydrothermal flow conditions. Gas sensing substrates were prepared from an In(2)O(3) suspension via drop-coating, and their gas sensing properties were tested for response to butane, ethanol, CO, ammonia, and NO(2) gases. The sensors showed excellent selectivity toward ethanol, giving a response of 18-20 ppm.     

Measurements of contaminant elements of wines by inductively coupled plasma-mass spectrometry: A comparison of two calibration approaches

The aim of the present work was to develop and validate an accurate method by ICP-MS focalized to the measurement of contaminant elements in wines, in special those with legal importance. In addition, we intended to evaluate the suitability of ICP-MS semi-quantitative methodology in order to reduce the time and cost of analysis. Twenty-six contaminant elements of wine (Li, Be, Al, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, As, Se, Rb, Sr, Ag, Cd, In, Cs, Ba, Hg, Tl, Pb, Bi and U) were measured using quantitative and semi-quantitative calibration approaches, in diluted white and red wines. In an early step potential interferences caused by Cl and Ca species were evaluated, in order to establish suitable mathematical corrections. For validation of ICP-MS procedures a few elements were determined by flame and electrothermal AAS. Reference wines from 1992 year, with provisional values, were analyzed and the results showed satisfactory agreement. The semi-quantitative calibration provided slightly higher limits of detection than those obtained by the quantitative calibration, and always lower than 0.1 μg l⁻¹, except for Fe and Zn. For most elements the recovery percentages (between 90 and 100%) and precision of the results (R.S.D. (%) < 4) were similar for both modes. Differences lower than 20% of concentration was obtained for most elements. Both methodologies offer valuable alternatives to wine characterization and comparison purposes. For legal requirements control purposes, with reference to the importance of accurate results, quantitative approach is the most suitable alternative.     

A general method for the controlled embedding of nanoparticles in silica colloids

A novel method for the controlled embedding of multiple nanoparticles of various materials, such as gold nanoparticles, quantum dots, and magnetic nanoparticles, in silica colloids is presented. After adsorption of the amphiphilic polymer poly(vinylpyrrolidone) on hydrophobic or hydrophilic stabilized nanoparticles, these are adsorbed on silica spheres and covered by variable-thickness silica shells. This silica coating protects the embedded nanoparticles against chemical transformations, which is of crucial importance for the biocompatibility of particles containing toxic elements. Moreover, it is found that the optical properties of the nanoparticles are retained. Possible applications of multicore particles are briefly discussed.     

A promiscuous glutathione transferase transformed into a selective thiolester hydrolase

Human glutathione transferase A1-1 (hGST A1-1) can be reengineered by rational design into a catalyst for thiolester hydrolysis with a catalytic proficiency of 1.4 x 10(7) M(-1). The thiolester hydrolase, A216H that was obtained by the introduction of a single histidine residue at position 216 catalyzed the hydrolysis of a substrate termed GSB, a thiolester of glutathione and benzoic acid. Here we investigate the substrate requirements of this designed enzyme by screening a thiolester library. We found that only two thiolesters out of 18 were substrates for A216H. The A216H-catalyzed hydrolysis of GS-2 (thiolester of glutathione and naphthalenecarboxylic acid) exhibits a k(cat) of 0.0032 min(-1) and a KM of 41 microM. The previously reported catalysis of GSB has a k(cat) of 0.00078 min(-1) and KM of 5 microM. The k(cat) for A216H-catalyzed hydrolysis of GS-2 is thus 4.1 times higher than for GSB. The catalytic proficiency (k(cat)/KM)/k(uncat) for GS-2 is 3 x 10(6) M(-1). The promiscuous feature of the wt protein towards a range of different substrates has not been conserved in A216H but we have obtained a selective enzyme with high demands on the substrate.     

Triplet energy back transfer in conjugated polymers with pendant phosphorescent iridium complexes

The nature of Dexter triplet energy transfer between bonded systems of a red phosphorescent iridium complex 13 and a conjugated polymer, polyfluorene, has been investigated in electrophosphorescent organic light-emitting diodes. Red-emitting phosphorescent iridium complexes based on the [Ir(btp)(2)(acac)] fragment (where btp is 2-(2'-benzo[b]thienyl)pyridinato and acac is acetylacetonate) have been attached either directly (spacerless) or through a -(CH(2))(8)- chain (octamethylene-tethered) at the 9-position of a 9-octylfluorene host. The resulting dibromo-functionalized spacerless (8) or octamethylene-tethered (12) fluorene monomers were chain extended by Suzuki polycondensations using the bis(boronate)-terminated fluorene macromonomers 16 in the presence of end-capping chlorobenzene solvent to produce the statistical spacerless (17) and octamethylene-tethered (18) copolymers containing an even dispersion of the pendant phosphorescent fragments. The spacerless monomer 12 adopts a face-to-face conformation with a separation of only 3.6 A between the iridium complex and fluorenyl group, as shown by X-ray analysis of a single crystal, and this facilitates intramolecular triplet energy transfer in the spacerless copolymers 17. The photo- and electroluminescence efficiencies of the octamethylene-tethered copolymers 18 are double those of the spacerless copolymers 17, and this is consistent with suppression of the back transfer of triplets from the red phosphorescent iridium complex to the polyfluorene backbone in 18. The incorporation of a -(CH(2))(8)- chain between the polymer host and phosphorescent guest is thus an important design principle for achieving higher efficiencies in those electrophosphorescent organic light-emitting diodes for which the triplet energy levels of the host and guest are similar.     

Weak and strong wall boundary procedures and convergence to steady-state of the Navier–Stokes equations

We study the influence of different implementations of no-slip solid wall boundary conditions on the convergence to steady-state of the Navier–Stokes equations. The various approaches are investigated using the energy method and an eigenvalue analysis. It is shown that the weak implementation is superior and enhances the convergence to steady-state for coarse meshes. It is also demonstrated that all the stable approaches produce the same convergence rate as the mesh size goes to zero. The numerical results obtained by using a fully nonlinear finite volume solver support the theoretical findings from the linear analysis.     

Portuguese Propolis Antitumoral Activity in Melanoma Involves ROS Production and Induction of Apoptosis

Melanoma is the most aggressive and life-threatening skin cancer type. The melanoma genome is the most frequently mutated, with the BRAF mutation present in 40–60% of melanoma cases. BRAF-mutated melanomas are characterized by a higher aggressiveness and progression. Adjuvant targeted treatments, such as BRAF and MEK inhibitors, are added to surgical excision in BRAF-mutated metastatic melanomas to maximize treatment effectiveness. However, resistance remains the major therapeutic problem. Interest in natural products, like propolis, for therapeutic applications, has increased in the last years. Propolis healing proprieties offer great potential for the development of novel cancer drugs. As the activity of Portuguese propolis has never been studied in melanoma, we evaluated the antitumoral activity of propolis from Gerês (G18.EE) and its fractions (n-hexane, ethyl acetate (EtOAc), and n-butanol) in A375 and WM9 melanoma cell lines. Results from DPPH•/ABTS• radical scavenging assays indicated that the samples had relevant antioxidant activity, however, this was not confirmed in the cell models. G18.EE and its fractions decreased cell viability (SRB assay) and promoted ROS production (DHE/Mitotracker probes by flow cytometry), leading to activation of apoptotic signaling (expression of apoptosis markers). Our results suggest that the n-BuOH fraction has the potential to be explored in the pharmacological therapy of melanoma.     

Selective Cytotoxicity of Portuguese Propolis Ethyl Acetate Fraction towards Renal Cancer Cells

Renal cell carcinoma is the most lethal cancer of the urological system due to late diagnosis and treatment resistance. Propolis, a beehive product, is a valuable natural source of compounds with bioactivities and may be a beneficial addition to current anticancer treatments. A Portuguese propolis sample, its fractions (n-hexane, ethyl acetate, n-butanol and water) and three subfractions (P1–P3), were tested for their toxicity on A498, 786-O and Caki-2 renal cell carcinoma cell lines and the non-neoplastic HK2 kidney cells. The ethyl acetate fraction showed the strongest toxicity against A498 (IC₅₀ = 0.162 µg mL⁻¹) and 786-O (IC₅₀ = 0.271 µg mL⁻¹) cells. With similar toxicity against 786-O, P1 (IC₅₀ = 3.8 µg mL⁻¹) and P3 (IC₅₀ = 3.1 µg mL⁻¹) exhibited greater effect when combined (IC₅₀ = 2.5 µg mL⁻¹). Results support the potential of propolis and its constituents as promising coadjuvants in renal cell carcinoma treatment.     

Unveiling Chemical Cues of Insect-Tree and Insect-Insect Interactions for the Eucalyptus Weevil and Its Egg Parasitoid by Multidimensional Gas Chromatographic Methods

Multidimensional gas chromatography is, presently, an established and powerful analytical tool, due to higher resolving power than the classical 1D chromatographic approaches. Applied to multiple areas, it allows to isolate, detect and identify a larger number of compounds present in complex matrices, even in trace amounts. Research was conducted to determine which compounds, emitted by host plants of the eucalyptus weevil, Gonipterus platensis, might mediate host selection behavior. The identification of a pheromone blend of G. platensis is presented, revealing to be more attractive to weevils of both sexes, than the individual compounds. The volatile organic compounds (VOCs) were collected by headspace solid phase microextraction (HS-SPME), MonoTrap^TM disks, and simultaneous distillation-extraction (SDE). Combining one dimensional (1D) and two-dimensional (2D) chromatographic systems—comprehensive and heart-cut two-dimensional gas chromatography (GC×GC and H/C-MD-GC, respectively) with mass spectrometry (MS) and electroantennographic (EAD) detection, enabled the selection and identification of pertinent semiochemicals which were detected by the insect antennal olfactory system. The behavioral effect of a selected blend of compounds was assessed in a two-arm olfactometer with ten parallel walking chambers, coupled to video tracking and data analysis software. An active blend, composed by cis and trans-verbenol, verbenene, myrtenol and trans-pinocarveol was achieved.