Intraspecific variation in the essential oils from Drimys brasiliensis leaves and stem barks

The essential oils from leaves and stem barks of Drimys brasiliensis Miers (Winteraceae), collected in July and December 2008, were analyzed by GC/FID and GC/MS. The stem bark oils were composed mainly of monoterpenes (July, 45 +/- 3%; December, 92 +/- 4%), while the oils from leaves showed the predominance of sesquiterpenes (July, 47 +/- 1%; December, 55 +/- 1%). The variation in the relative amount of constituents could be associated, at least in part, to several microclimatic parameters such as precipitation, temperature and/or phenological state, which were different for each collection of D. brasiliensis.     

Generic fast gradient liquid chromatography/tandem mass spectrometry techniques for the assessment of the in vitro permeability across the blood-brain barrier in drug discovery

Rapid, generic gradient liquid chromatography/tandem mass spectrometry (LC/MS/MS) assays, designed to accelerate sample analyses, have been developed to keep pace with the productivity of advanced synthetic procedures. In this study, LC/MS/MS was combined with an in vitro, cell-based, blood-brain barrier (BBB) model to evaluate the potential of new chemical entities (NCEs) to cross the BBB. This in vitro assay provides the permeability of discovery compounds across a monolayer of a primary culture of bovine brain microvessel endothelial cells in a fraction of the time that is required for in vivo studies (brain/plasma concentrations), using only 2 mg of the compound. The results are consistent with in vivo brain/plasma concentration ratio data.     

Generation and reactivity of 3‐carbethoxy‐5‐phenyl‐5H,7H‐thiazolo[3,4‐c]oxazol‐4‐ium‐1‐olate

3‐Carbethoxy‐5‐phenyl‐5H,7H‐thiazolo[3,4‐c]oxazol‐4‐ium‐1‐olate was generated from (2R,4R)‐N‐ethoxyoxalyl‐2‐phenylthiazolidine‐4‐carboxylic acid and its reactivity studied. This münchnone showed low reactivity as dipole although from the reaction with dimethyl acetylenedicarboxylate the corresponding (3R)‐3‐phenyl‐17H,3H‐pyrrolo[1,2‐c]thiazole‐5,6,7‐tricarboxylate could be isolated. The thermolysis of (2R,4R)‐N‐ethoxyoxalyl‐2‐phenylthiazolidine‐4‐carboxylic acid in refluxing acetic anhydride led to the synthesis of N‐(1‐ethoxycarbonyl‐2‐phenylvinyl)‐2‐phenyl‐4‐thioxo‐1,3‐thiazolidine. The structure of methyl (2R,4R)‐N‐ethoxyoxalyl‐2‐phenylthiazoliddine‐4‐carboxylate was determined by X‐ray crystallography.     

The partial hydrogenation of benzene to cyclohexene by nanoscale ruthenium catalysts in imidazolium ionic liquids

The controlled decomposition of an Ru(0) organometallic precursor dispersed in 1-n-butyl-3-methylimidazolium hexafluorophosphate (BMI.PF(6)), tetrafluoroborate (BMI.BF(4)) or trifluoromethane sulfonate (BMI.CF(3)SO(3)) ionic liquids with H(2) represents a simple and efficient method for the generation of Ru(0) nanoparticles. TEM analysis of these nanoparticles shows the formation of superstructures with diameters of approximately 57 nm that contain dispersed Ru(0) nanoparticles with diameters of 2.6+/-0.4 nm. These nanoparticles dispersed in the ionic liquids are efficient multiphase catalysts for the hydrogenation of alkenes and benzene under mild reaction conditions (4 atm, 75 degrees C). The ternary diagram (benzene/cyclohexene/BMI.PF(6)) indicated a maximum of 1 % cyclohexene concentration in BMI.PF(6), which is attained with 4 % benzene in the ionic phase. This solubility difference in the ionic liquid can be used for the extraction of cyclohexene during benzene hydrogenation by Ru catalysts suspended in BMI.PF(6). Selectivities of up to 39 % in cyclohexene can be attained at very low benzene conversion. Although the maximum yield of 2 % in cyclohexene is too low for technical applications, it represents a rare example of partial hydrogenation of benzene by soluble transition-metal nanoparticles.     

Simultaneous Determination of Nickel and Cobalt Using a Solid Bismuth Vibrating Electrode by Adsorptive Cathodic Stripping Voltammetry

A simple, fast, sensitive and greener voltammetric procedure for simultaneous analysis of nickel (Ni) and cobalt (Co) by square wave adsorptive cathodic stripping voltammetry (SW‐AdCSV) using a solid bismuth vibrating electrode is presented for the first time. The procedure enables to determine Ni together with Co, in ammonia buffer 0.1 M (pH 9.2) and in the presence of oxygen, and involves an adsorptive accumulation of metal‐dimethylglyoxime (Ni‐DMG and Co‐DMG) complexes on the electrode surface. For Ni and Co, the detection limits, obtained with 30 s of accumulation time, were 0.6 and 1.0 µg L^?1, respectively. The method was free of metals (Cd²⁺, Cr³⁺, Cr⁶⁺, Cu²⁺, Fe³⁺ and Pb²⁺ up to 50 µg L^?1, Al³⁺ and Mn²⁺ up to 500 µg L^?1; Zn²⁺ up to 300 µg L^?1) interferences up to the concentrations mentioned in brackets. The proposed method was validated for simultaneous determination of Ni and Co in a certified reference surface and river waters with good results.     

Performance of hydrophobic interaction ligands for human membrane‐bound catechol‐O‐methyltransferase purification

Despite of membrane catechol‐O‐methyltransferase (MBCOMT, EC 2.1.1.6) physiological importance on catecholamines’ O‐methylation, no studies allowed their total isolation. Therefore, for the first time, we compare the performance of three hydrophobic adsorbents (butyl‐, epoxy‐, and octyl‐Sepharose) in purification of recombinant human COMT (hMBCOMT) from crude Brevibacillus choshinensis cell lysates to develop a sustainable chromatographic process. Hydrophobic matrices were evaluated in terms of selectivity and hMBCOMT's binding and elution conditions. Results show that hMBCOMT's adsorption was promoted on octyl and butyl at ≤375 mM NaH₂PO_4, while on epoxy higher concentrations (>850 mM) were required. Additionally, hMBCOMT's elution was promoted on epoxy, butyl, and octyl using respectively 0.1–0.5, 0.25–1, and 1% of Triton X‐100. On butyl media, a stepwise strategy using 375 and 0 mM NaH₂PO₄, followed by three elution steps at 0.25, 0.7 and 1% Triton X‐100, allowed selective hMBCOMT isolation. In conclusion, significant amounts of MBCOMT were purified with high selectivity on a single chromatography procedure, despite its elution occurs on multiple peaks. Although successful applications of hydrophobic interaction chromatography in purification of membrane proteins are uncommon, we proved that traditional hydrophobic matrices can open a promising unexplored field to fulfill specific requirements for kinetic and pharmacological trials.     

Assessment of dispersive liquid–liquid microextraction for the simultaneous extraction,preconcentration, and derivatization of Hg2+ and CH3Hg+ for further determination by GC–MS

This work reports the development of a dispersive liquid – liquid microextraction method for the simultaneous extraction, preconcentration, and derivatization of Hg²⁺ and CH₃Hg⁺ species from water samples for further determination by GC – MS. Some parameters of the proposed method, such as volume and type of disperser and extraction solvent, and Na[B(C₆H₅)₄] concentration were investigated using response surface methodology. Suitable recoveries were obtained using 80 μL C₂Cl₄ (as extraction solvent), 1000 μL ethanol (as disperser solvent), and 300 μL 2.1 mmol/L Na[B(C₆H₅)₄] (as derivatizing agent). Accuracy was evaluated in terms of recovery and ranged from 87 to 99% with RSD values <7%. In addition, a certified reference material of water (NIST 1641d) was analyzed and agreed with the certified value about 107% (for Hg²⁺), with RSD values <8.5%. LODs were 0.3 and 0.2 μg/L, with enrichment factors of 112 and 115 for Hg²⁺ and CH₃Hg⁺, respectively. The optimized method was applied for the determination of Hg²⁺ and CH₃Hg⁺ in tap, well, and lake water samples.     

Reactivity and chemical synthesis of L-pyrrolysine- the 22(nd) genetically encoded amino acid

L-pyrrolysine, the 22(nd) genetically encoded amino acid, was previously deduced to be (4R, 5R)-4-substituted-pyrroline-5-carboxylate attached to the epsilon-nitrogen of lysine based on the crystal structure of the M. barkeri monomethylamine methyltransferase (MtmB). To confirm L-pyrrolysine's identity, structures of MtmB have been determined following treatment with hydroxylamine, N-methylhydroxylamine, or dithionite. Analysis of these structures has provided additional support for the presence of the pyrroline ring and, together with previous mass spectroscopy data, has led us to assign the C(4)-substituent to a methyl group. Based on this assignment, synthetic L-pyrrolysine was prepared by chemical methods. Detailed study of this chemically synthesized L-pyrrolysine has allowed us to characterize its physical properties, to study its chemical stability, and to elucidate the role of its C(4) substituent. Future applications of this synthetic L-pyrrolysine include its in vivo incorporation into recombinant proteins.     

Effect of the pore geometry in the characterization of the pore size distribution of activated carbons

In this work, the characterization of Activated Carbons (AC) by using the independent pore models is discussed, with special emphasis on the issue of how the assumed pore geometry can affect the resulting Pore Size Distribution (rPSD) and on the problem of the unicity of the PSD when different probe molecules are used in adsorption experiments. A theoretical test was performed using virtual solids based in the so-called Mixed Geometry Model (MGM) (Azevedo et al. 2010). The MGM uses a kernel of adsorption isotherms generated by GCMC for different pore sizes and two pore geometries: slit and triangular. The adsorption isotherms of a virtual MGM solid were fitted with both the traditional Slit Geometry Model (SGM) and the Mixed Geometry Model (MGM). It is demonstrated that, by assuming a different pore geometry model from that of the real sample, different PSDs may be obtained by fitting adsorption isotherms of different probe gases. Finally, experimental results are shown which both point toward the MGM as an acceptable extension of the SGM and confirm that the MGM is a closer representation of the actual porous structure of most activated carbons.