High power single-frequency continuous-wave Nd:YVO4 master-oscillator power amplifier

We report a highly-efficient, high-power, single-frequency Nd:YVO₄ master-oscillator power-amplifier with near-diffraction-limited output beam quality. A diode-pumped Nd:YVO₄ ring laser incorporating a passive method for suppressing axial-mode-hopping was employed as the master-oscillator, and was amplified by a three-stage diode-end-pumped Nd:YVO₄ amplifier, yielding 79 W of output with an extraction efficiency of 29%. The overall power gain was 15 dB for an input power from the master-oscillator of 2.4 W, and the M² parameter was less than 1.5 at the maximum power. The prospects for a further increase of power and brightness via this approach are considered. PACS 42.55.Xi; 42.60.Da; 42.60.Jf     

The effect of surface crystalline layers on asymmetric off-diagonal magnetoimpedance in field-annealed CoFeSiB amorphous ribbons

The off-diagonal magnetoimpedance in field-annealed CoFeSiB amorphous ribbons was measured using a pick-up coil wound around the sample. One side of a ribbon was etched in hydrofluoric acid solution during various times in order to change the thickness of the surface crystalline layer appearing after annealing. The asymmetric two-peak field dependence of the off-diagonal impedance was observed for all samples. The evolution of the off-diagonal magnetoimpedance with the change in the ribbon thickness is analyzed.     

A Reverse of bessel’s inequality in 2-inner product spaces and some grüss type related results with applications

A reverse of Bessel’s inequality in 2-inner product spaces and companions of Grüss inequality with applications for determinantal integral inequalities are given.     

Photoemission studies of oxygen adsorbed on a LiAl(1 1 0) alloy surface: Role of Li segregation

We investigated that the effect of the number of segregated Li atoms on the rate of oxidation on a LiAl alloy surface. Oxygen molecules adsorbed on the LiAl alloy react with the surface atoms to form stable oxides. The segregated Li atoms at reconstructed surfaces (c(2×2) and (2×1)) enhance the oxidation rate and form stable LiAlO_x and Li₂O. The degree of enhancement of oxidation by segregated Li atoms varies as a function of O₂ exposure and annealing temperature, where the latter is directly related to the mode of surface reconstruction by Li segregation.     

Design and Experimental Characterization of Low‐Volume PM10/2.5/1.0 Trichotomous Sampler Inlet

This paper presents the development and laboratory evaluation of a PM10/2.5/1.0 trichotomous sampling inlet that consists of two main parts: a previously designed PM10 size‐selective inlet part and a PM2.5/1.0 two‐stage virtual impactor, which was newly fabricated and attached serially to the PM10 size selective inlet part. Particles are collected in three locations through the trichotomous sampling inlet to provide for not only particle concentration measurements of PM10, PM2.5 and PM1.0, but also those of PM2.5–10 and PM1.0–2.5.     

A Lagrangean heuristic algorithm for disassembly scheduling with capacity constraints

This paper considers the problem of determining the disassembly schedule (quantity and timing) of products in order to satisfy the demand of their parts or components over a finite planning horizon. The objective is to minimize the sum of set-up, disassembly operation, and inventory holding costs. As an extension of the uncapacitated versions of the problem, we consider the resource capacity restrictions over the planning horizon. An integer program is suggested to describe the problem mathematically, and to solve the problem, a heuristic is developed using a Lagrangean relaxation technique together with a method to find a good feasible solution while considering the trade-offs among different costs. The effectiveness of the algorithm is tested on a number of randomly generated problems and the test results show that the heuristic suggested in this paper can give near optimal solutions within a short amount of computation time.     

Nusselt number correlations for heat transfer to small spheres in thermal plasma flows

Seven different equations predicting heat transfer rates to small spheres in plasma flows are examined considering argon and nitrogan as plasma gases from 300 to 21,000 K at 1 atm. For argon there is a general consensus up to 9000 K, beyond which wide deviations in behavior occur. For nitrogen, the seven correlations are in good agreement up to 4000 K, but show substantial deviations beyond this value. Comparisons with the sparsely available experimental data are made for argon from 300 to 17,000 K and for nitrogen up to 5500 K. Disagreement between the various correlations and experiment can exceed one order of magnitude.     

Assessment of thermal expansion coefficient of methylsilsesquioxane thin film

For the methylsilsesquioxane film whose optical birefringence is almost zero, it was recently reported that its vertical thermal expansion coefficient (CTE) was approximately one order of magnitude larger than the lateral CTE. Though the birefringence is not an absolute predictor of anisotropic behavior, the discrepancy in both the CTEs was so remarkable that it was essential to investigate whether the anisotropy was intrinsic property or not. If the effect of Poisson's ratio is considered in the calculation of the vertical CTE and when elastic modulus measured by surface acoustic wave spectroscopy is used in the assessment of the lateral CTE, both the CTEs are coincident with each other. Therefore, it can be concluded that the discrepancy in the CTEs can be attributed to a higher in‐plane polymer chain orientation but it can also arise from the misleadingly assumed modulus and Poisson's ratio. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3109–3120, 2006     

A family of maximal surfaces in Lorentz-Minkowski three-space

We prove the existence of an infinite family of complete spacelike maximal surfaces with singularities in Lorentz-Minkowski three-space and study their properties. These surfaces are distinguished by their number of handles and have two elliptic catenoidal ends.

     

Stowage planning in maritime container transportation

We consider a stowage-planning problem of arranging containers on a container ship in the maritime transportation system. Since containers are accessible only from the top of the stack, temporary unloading and reloading of containers, called shifting, is unavoidable if a container required to be unloaded at the current port is stacked under containers to be unloaded at later ports on the route of the ship. The objective of the stowage planning problem is to minimize the time required for shifting and crane movements on a tour of a container ship while maintaining the stability of the ship. For the problem, we develop a heuristic solution method in which the problem is divided into two subproblems, one for assigning container groups into the holds and one for determining a loading pattern of containers assigned to each hold. The former subproblem is solved by a greedy heuristic based on the transportation simplex method, while the latter is solved by a tree search method. These two subproblems are solved iteratively using information obtained from solutions of each other. To see the performance of the suggested algorithm, computational tests are performed on problem instances generated based on information obtained from an ocean container liner. Results show that the suggested algorithm works better than existing algorithms.