广义Birkhoff系统动力学的一类逆问题

针对广义Birkhoff系统动力学,提出广义Birkhoff系统动力学的一类逆问题,研究由已知积分流形来建立广义Birkhoff方程. 这类逆问题的解通常不是唯一的,需给出必要的补充要求. 最后举例说明结果的应用. 关键词： 广义Birkhoff系统 动力学逆问题 积分流形     

Efficient 1645-nm Er:YAG laser

We report a resonantly fiber-laser-pumped Er:YAG laser operating at the eye-safe wavelength of 1645 nm, exhibiting 43% optical efficiency and 54% incident slope efficiency and emitting 7-W average power when repetitively Q switched at 10 kHz. To our knowledge, this is the best performance (conversion efficiency and average power) obtained from a bulk solid-state Q-switched erbium laser. At a 1.1-kHz pulse repetition frequency the laser produces 3.4-mJ pulses with a corresponding peak power of 162 kW. Frequency doubling to produce 822.5-nm, 4.7-kW pulses at 10 kHz was performed to demonstrate the laser's utility.     

High-speed horizontal-path atmospheric turbulence correction with a large-actuator-number microelectromechanical system spatial light modulator in an interferometric phase-conjugation engine

Results of atmospheric propagation for a high-speed, large-actuator-number adaptive optics system are presented. The system uses a microelectromechanical system- (MEMS-) based spatial light modulator correction device with 1024 actuators. Tests over a 1.35-km path achieved correction speeds in excess of 800 Hz and Strehl ratios close to 0.5. The wave-front sensor was based on a quadrature interferometer that directly measures phase. This technique does not require global wave-front reconstruction, making it relatively insensitive to scintillation and phase residues. The results demonstrate the potential of large-actuator-number MEMS-based spatial light modulators to replace conventional deformable mirrors.     

Structure,transport and magnetic properties of the double perovskite (Ca<Subscript>2-2x</Subscript>Sr<Subscript>2x</Subscript>)FeMoO<Subscript>6</Subscript>

In this paper we report the results of a detailed investigation of the double perovskite (Ca_2-2xSr_2x)FeMoO₆ system. Chemical size effects on structural, electrical, and magnetic properties caused by the substitution of isovalent, larger Sr ions into the smaller Ca sites, resulting in (Ca_2-2xSr_2x)FeMoO₆, have been examined. The compounds crystallize in the monoclinic space group P2₁/n for 0.0x<0.2, the orthorhombic space group Pbnm for 0.2x<0.4, and the tetragonal space group I4/m and I4/mmm for x0.4. Examination of the resistivity of all compounds reveals a metallic behavior which is well described by a Tⁿ dependence except for x=1.0. These n values change from 1 to 2 as T decreases lower than T_c. This is indicative of a variation in the transport mechanism at T_c. The ferrimagnetic transition temperature T_c increases with increasing x from 318 (x=0.0) to 393 K (x=1.0). For all samples, the saturation magnetization at 82 K obeys M_s3.5_B/(formula unit), compared to a theoretical spin-only moment of 4_B/(formula unit) for a perfectly ordered compound. PACS 74.25.Fy; 74.25.Ha     

Nonresonant two-photon generation of excitonic matter in a CuCl pellet

A pressed CuCl pellet is optically excited at 2 K using an excitation energy in the range from 1892 to 2843 meV, which is far below the bandgap. The steady-state population dynamics unambiguously indicates an unusual two-photon generation of ground-state excitons. At high-excitation levels, the observed spectra exhibit rich spectral features arising from electron-hole plasma and electron-hole droplets formation. This nonresonant two-photon excitation is presumably assisted by impurity bands due to grain boundaries and surfaces in this random semiconductor.     

Two-dimensional poroelastic acoustical foam shape design for absorption coefficient maximization by topology optimization method

Optimal shape design of a two-dimensional poroelastic acoustical foam is formulated as a topology optimization problem. For a poroelastic acoustical system consisting of an air region and a poroelastic foam region, two different physical regions are continuously changed in an iterative design process. To automatically account for the moving interfaces between two regions, we propose a new unified model to analyze the whole poroelastic acoustical foam system with one set of governing equations; Biot's equations are modified with a material property interpolation from a topology optimization method. With the unified analysis model, we carry out two-dimensional optimal shape design of a poroelastic acoustical foam by a gradient-based topology optimization setting. The specific objective is the maximization of the absorption coefficient in low and middle ranges of frequencies with different amounts of a poroelastic material. The performances of the obtained shapes are compared with those of well-known wedge shapes, and the improvement of absorption is physically interpreted.     

Erratum to Formation and control of Au and Ag nanoparticles inside borate glasses using femtosecond laser and heat treatment

We report the spectroscopic properties of femtosecond laser-irradiated sodium-alumino-borate glass doped with silver and gold ions. We precipitated gold and silver nanoparticles by laser irradiation and annealing at 400°C for 30 min. The irradiation and annealing treatment produced different absorption and emission characteristics in Au³⁺ doped and Au³⁺, Ag⁺ codoped glasses, and the possible mechanisms of the observed results are discussed. The size of the nanoparticles was estimated by TEM and absorption band analysis.     

Single-walled carbon nanotube (SWNT)-carboxymethylcellulose (CMC) dispersions in aqueous solution and electronic transport properties when dried as thin film conductors

Obtaining uniformly dispersed SWNT within an aqueous mixture for subsequent use as a dried coating in electronic biosensors is a challenge. The objective of this study is to relate SWNT dispersion conditions to resultant dried film properties. Aqueous solutions of SWNT dispersed with CMC (a dispersing agent with unique properties compatible with biomolecules) at different SWNT:CMC weight ratios and at different sonication conditions were studied. Solution particle size distribution data was obtained using dynamic light scattering. Differently formulated/processed SWNT/CMC solutions were used to form dry thin, conductive films. The resistance of each film was measured and its resistivity calculated. Response Surface Methodology (RSM) design of experiments (DOE) analysis was used as the tool to fit the data to establish a model and identify trends for the parameters studied. Profilometry was used to examine film surface uniformity. 3D optical microscopy was used to investigate film morphology and determine film thickness, and to relate these data back to solution dispersion conditions and dried film resistances. The lowest dried film resistivity (0.012 ohm-cm) was obtained at the highest levels of parameters studied in the DOE. Smaller solution particle size resulted in lower dried film surface roughness and better film uniformity.     

Synthesis and evaluation of triphenylphosphonium conjugated 18F-labeled silica nanoparticles for PET imaging

Journal of Radioanalytical and Nuclear Chemistry - Accumulation of triphenylphosphonium (TPP) is normally observed in the mitochondria from the extracellular spaces due to the high difference in...     

Uranium recovery with zinc distillation from a liquid zinc cathode for pyroprocessing

Journal of Radioanalytical and Nuclear Chemistry - U recovery test was performed on a Zn-U alloy to confirm the feasibility of Zn as an alternative cathode material. An evaporation test of pure Zn...