Combination of LII and extinction measurements for determination of soot volume fraction and estimation of soot maturity in non-premixed laminar flames

The measurement of soot and soot precursors is important for understanding the formation of soot particles in flames. In this paper, we use the difference between laser-induced incandescence (LII) and two-dimensional extinction measurements to assess the contribution of soot precursors to the extinction measurement. LII measurements are performed with a high spatial resolution of 100 µm to determine the soot volume fraction (f _V) in a laminar ethylene/air non-premixed flame at the standard Gülder conditions. While LII is specific to mature soot only, the extinction data represent attenuation due to mature and young soot (absorption and elastic scattering) and also absorption by soot precursors. The difference between the two measurements indicates the contribution of soot precursors and allows a determination of the maturity of soot. This is important knowledge for those using extinction techniques to measure soot concentration, as the contribution from soot precursors may lead to an overestimation of the mature soot concentration. Further, regions with high soot-precursor concentrations, which lead to soot formation, can be identified.     

The flat-maximum effect and generic linear scoring models: a test

Received on 1 July 1991. Predicting human behaviour patterns with linear correlationmodels has absorbed researchers for the past five decades. Althoughmost observers generally concede that humans are inferior tosuch models in combining information, linear scoring modelsare unfortunately, plagued by the flat-maximum effect or the‘curse of insensitivity’. As Lovie & Lovie(1986)observe: ‘The predictive ability of linear models is insensitiveto large variations in the size of regression weights and tothe number of predictors.’ In essence, seemingly differentscoringmodels tend to produce indistinguishable predictive outcomes. Since its demonstration by Dawes & Corrigan (1974), observershave cast the flat maximum in a decidedly negative light. Incontrast, Lovie & Lovie (1986) present a provocatively contrarianview of the flat maximum‘s positive potential. In thissame vein, we examine the predictive power of a generic credit-scoringmodel versus individual empirically derived systems. If, asWainer (1976) noted in regard to the flat maximum, ’itdon‘t make no nevermind’, generic credit-scoringmodels could provide cheaper alternatives to individual empiricallyderived models. During the period 1984–8, a series of linear credit-scoringmodels were developed for ten Southeastern U.S. credit unions.For each credit union, stepwise multiple regression was employedto select a subset of explanatory variables to be used in adiscriminant analysis. A generic credit-scoring equation wasdeveloped from the resulting discriminant analyses using weightedaverage coefficients from five systems. The predictive powerof the generic model was compared to the predictive power ofholdout sample of the five remaining credit-scoring models. In all cases, the generic model's performance was very closeto that of the empirically derived models. Thus, our findingssupport Lovie & Lovie's (1986) challenge to the conventionalwisdom that the flat maximum casts a pall on the successfulmodelling of judgement processes. Indeed, the flat maximum impliesa positive role for simpler, and hence cheaper, generic models.Although further research is needed, it should be possible todevelop hybrid models with generic cores that perform as wellas empirically derived linear models.     

Determining aerosol particle size distributions using time-resolved laser-induced incandescence

The particle size distribution within an aerosol containing refractory nanoparticles can be inferred using time-resolved laser-induced incandescence (TR-LII). In this procedure, a small volume of aerosol is heated to incandescent temperatures by a short laser pulse, and the incandescence of the aerosol particles is then measured as they return to the ambient gas temperature by conduction heat transfer. Although the cooling rate of an individual particle depends on its volume-to-area ratio, recovering the particle size distribution from the observed temporal decay of the LII signal is complicated by the fact that the LII signal is due to the incandescence of all particle size classes within the sample volume, and because of this, the particle size distribution is related to the time-resolved LII signal through a mathematically ill-posed equation. This paper reviews techniques proposed in the literature for recovering particle size distributions from TR-LII data. The characteristics of this problem are then discussed in detail, with a focus on the effect of ill-posedness on the stability and uniqueness of the recovered particle size distributions. Finally, the performance of each method is evaluated and compared based on the results of a perturbation analysis. PACS  44.05.+e; 47.70.Pq; 78.70.-g; 65.80.+n; 78.20.Ci     

High-Modulus Wholly Aromatic Fibers. I. Wholly Ordered Polyamide-Hydrazides and Poly-1,3,4-oxadiazole—Amides

Several completely ordered polyamide-hydrazide copolymers were prepared via low temperature poly condensation of aromatic diacid chlorides with symmetrical aromatic diamines containing preformed dihydrazide linkages. Highly crystalline, hot-drawn fibers of the polyamide-hydrazide containing only para-oriented phenylene units showed unusually high strength and exceptionally high initial modulus: 10.8 and 508 g/den, respectively, at 2.9% elongation-to-break. The as-spun fibers also exhibited rather high tensile strength and unusually high initial modulus: 8.2 and 291 g/den, respectively, at 9.4% elongation-to-break. The hot-drawn fiber retained considerable strength at elevated temperatures, exhibiting a tenacity of 1.4 g/den and an initial modulus of 169 g/den at 350°C. Heat-aging of the as-spun fiber at 185°C in air showed that 66% of the original tenacity, 41% of the elongation, and 86% of the modulus were retained even after 336 hr. Substitution of as little as 25 mole % meta-oriented phenylene rings for para-oriented ones resulted in loss of the ultra-high strength and modulus, giving tensile properties comparable to those of fibers from wholly aromatic polyamides of the meta-oriented type. Fibers from the polyamide-hydrazides containing 50 mole % meta-oriented rings showed similar properties. Although ordered oxadiazole-amide copolymers were obtained from diamines containing two preformed oxadiazole linkages separated by m-phenylene rings, fibers could not be spun from them. Fiber of an ordered oxadiazole-amide copolymer was obtained, however, by heat treatment of the wholly p-phenylene ordered poly amide-hydrazide copolymer precursor fiber. Such a fiber exhibited a tenacity of 15.3 g/den, 3.6% elongation-to-break, and 564 g/den initial modulus.     

Formal hydride transfer mechanism for photoreduction of 3-phenylquinoxalin-2-ones by amines. Association Of 3-phenylquinoxalin-2-one with aliphatic amines

The photophysical and photochemical behavior of 1-methyl-3-phenylquinoxalin-2-one (MeNQ) and 3-phenylquinoxalin-2-one (HNQ) in the presence of amines is reported. While HNQ fluorescence shows an auxochromic effect and a bathochromic shift with added amines, explained by association of HNQ with amine in the ground state and emission from both excited species HNQ and [HNQ-amine], both MeNQ and HNQ are photoreduced efficiently on irradiation in the presence of amines, leading to the semireduced quinoxalin-2-ones, MeNQH(-) and HNQH(-), respectively, via an electron-proton-electron transfer, with unit quantum yields at high amine concentrations. The semireduced quinoxalin-2-ones XNQH(-) (X = H, Me) revert almost quantitatively to the parent XNQ in a dark thermal reaction with an activation free energy for MeNQH(-) of 17.4 and 25.9 kcal/mol in acetonitrile and benzene, respectively. Kinetic and spectroscopic (UV and NMR) evidence supports the proposed reaction mechanism for the reversible photoreduction.     

ABSORPTION AND EMISSION STUDIES OF ELECTRONIC STATES OF N-ARYLBENZAMIDES

Abstract— Absorption and emission spectra of several N-arylbenzamides have been measured. The quantum yields for their fluorescence were found to be dependent on matrix viscosity and temperature. Singlet-triplet splittings for these compounds were determined from their emission spectra and found to be abnormally small for π. π* states (˜ 1500 cm^-1). Indeed, the phosphorescence maxima of N-arylbenzamides occur slightly to the blue relative to their fluorescence maxima. Intersystem crossing efficiencies were determined for several of these compounds and are consistent with S₁→ S ₀ radiationless decay.     

Asymptotic behaviour of the ratio of density gradient to electron density for atomic systems

The asymptotic behaviour of the negative ratio of the density gradient to the electron density, q(r), for neutral and singly charged atoms has been investigated. The results show that, for large r, q(r) can approach its limit √8?, where ? is the first ionization potential, from either above or below depending on the specific system considered.