The binding of single-stranded DNA and PNA to single-walled carbon nanotubes probed by flow linear dichroism

The binding of single-stranded DNAs and a neutral DNA analogue (peptide nucleic acid, PNA) to single-walled carbon nanotubes in solution phase has been probed by absorbance spectroscopy and linear dichroism. The nanotubes are solubilised by aqueous sodium dodecyl sulfate, in which the nucleic acids also dissolve. The linear dichroism (LD) of the nanotubes, when subtracted from that due to the nanotubes/nucleic acid samples, gives the LD of the bound nucleic acid. The binding of the single-stranded DNA to the single-walled nanotubes is quite different from that previously observed for double-stranded DNA. It is likely that the nucleic acid bases lie flat on the nanotube surface with the backbone wrapping round the nanotube at an oblique angle in the region of 45 degrees . The net effect is like beads on a string. The base orientation with the single-stranded PNA is inverted with respect to that of the single-stranded DNA, as shown by their oppositely signed LD signals.     

Determination of H2 and D2 content in metals and alloys using hot vacuum extraction

A hot vacuum extraction technique for the determination of hydrogen in metal and alloy samples has been standardised. After measuring the total pressure of the evolved gases, individual hydrogen and deuterium intensities are measured using an on-line quadrupole mass spectrometer. Synthetic mixtures of H₂ and D₂, in known concentrations, have been analysed by QMS and an analytical expression correlating the measured [D₂]/[HD] intensity ratio with the mole fraction of deuterium in the synthetic mixture has been arrived at. The precision and accuracy in the measurement of hydrogen is about 10% at 50 ppmw level.     

Syntheses of the first N-mono- and N,N'-dipolyfluoroalkyl-4,4'-bipyridinium compounds

Reactions of 4,4'-bipyridine (1) with excess of polyfluoroalkyl iodides (2a-d) at 100-110 degrees C, under neat conditions, led to the formation of monoquaternary salts (3a-d) in > 90% yields. Salts 3a-d were metathesized with LiN(SO2CF3)2 either in water or water/acetone mixtures to form ionic liquids (4a-d), respectively, in > 88% yields. When 1 was reacted with 2.5 equivalent of 2a-c in DMF at 110 degrees C, the diquaternary salts 5a-c were formed in > 85% yields. Alternatively, 5a-c were also synthesized by heating a mixture of 3a-c and 2a-c (1.25 equivalent) in DMF. The metathesis reaction of 5a-c with LiN(SO2CF3)2 produced dicationic ionic liquids (6a-c) in > 86% yield.     

Extraction of actinides by quaternary amines from hydrochloric acid medium

The extraction of Np(IV), Pu(IV) and U(VI) from aqueous hydrochloric acid into quaternary amines has been studied. The dependence of the distribution coefficient on amine concentration suggests that the actinide ions extracted are NpCl ₆ ²⁻ PuCl ₆ ²⁻ and UO₂Cl ₄ ²⁻ . This is further supported by the absorption spectra of the amine extracts of these actinide ions. Based on the extraction data obtained, a simple method for the separation of typical metal ions such as Cs, lanthanides and Zr from U(VI) and Pu(IV) is suggested.     

Unusual iron(III) ate complexes stabilized by Li-pi interactions

Several iron(III) complexes incorporating diamidoether ligands are described. The reaction between [Li(2)[RN(SiMe(2))](2)O] and FeX(3) (X=Cl or Br; R=2,4,6-Me(3)Ph or 2,6-iPr(2)Ph) form unusual ate complexes, [FeX(2)Li[RN(SiMe(2))](2)O](2) (2, X=Cl, R=2,4,6-Me(3)Ph; 3, X=Br, R=2,4,6-Me(3)Ph; 4, X=Cl, R=2,6-iPr(2)Ph) which are stabilized by Li-pi interactions. These dimeric iron(III)-diamido complexes exhibit magnetic behaviour characteristic of uncoupled high spin (S= 5/2 ) iron(III) centres. They also undergo halide metathesis resulting in reduced iron(II) species. Thus, reaction of 2 with alkyllithium reagents leads to the formation of iron(II) dimer [Fe[Me(3)PhN(SiMe(2))](2)O](2) (6). Similarly, the previously reported iron(III)-diamido complex [FeCl[tBuN(SiMe(2))](2)O](2) (1) reacts with LiPPh(2) to yield the iron(II) dimer [Fe[tBuN(SiMe(2))](2)O](2) but reaction with LiNPh(2) gives the iron(II) product [Fe(2)(NPh(2))(2)[tBuN(SiMe(2))](2)O] (5). Some redox chemistry is also observed as side reactions in the syntheses of 2-4, yielding THF adducts of FeX(2): the one-dimensional chain [FeBr(2)(THF)(2)](n) (7) and the cluster [Fe(4)Cl(8)(THF)(6)]. The X-ray crystal structures of 3, 5 and 7 are described.     

Photolysis of diacyl peroxides: a radical-based approach for the synthesis of functionalized amino acids

[reaction: see text] Photolysis of the amino acid derived symmetrical and unsymmetrical diacyl peroxides at 254 nm at low temperature (-78 to -196 degrees C) generates various bis(amino acids) in a concise manner and with orthogonal protection. The methodology was applied to the synthesis of (4R)-5-propyl-L-leucine (PrLeu), a component of HUN-7293.     

Synthesis and Spectroscopic Characterisation of Six-Coordinate Complexes of Oxovanadium(V)

Complexes of the types VO(L)(R-deaH), VO(R-dea)(LH), and VO(L)(OGOH)[L = deprotonated form of N-(1-hydroxyethyl) naphthaldimine; R-dea = deprotonated form of a N-substituted diethanolamine, with R = H or Ph; G = CH₂CH₂, CHMeCHMe, CMe₂CMe₂, CHMeCH₂CMe₂, CMe₂CH₂CH₂CMe₂] have been prepared by the equimolar reactions of VO(OPr ⁱ )₃, LH₂, and an appropriate diethanolamine or glycol in benzene. All of these coloured solid complexes have been characterised by elemental (C, H, N, and V) analyses and by spectroscopic (i.r., electronic, ¹H-, ⁵¹V-n.m.r) studies. The relative lability of the hydroxy group(s) of N-(1-hydroxyethyl)naphthaldiamine, diethanolamine, and glycol has also been investigated.     

Experimental study of hydraulic engine mounts using multiple inertia tracks and orifices: Narrow and broad band tuning concepts

Hydraulic engine mount tuning concepts with one inertia track and one decoupler are well understood. However, the dynamic response with multiple tracks or orifices is not. To overcome this void in the literature, dynamic tuning concepts of hydraulic engine mounts, with emphasis on multiple (n-)inertia tracks/orifices, are experimentally examined. A new prototype mount concept is designed, built, and experimentally evaluated in a controlled manner. Refined linear time-invariant models of fixed decoupler-type designs are developed to critically assess the dynamic stiffness measurements and to explore a family of alternate designs. Three narrowband devices are investigated for accurately predicting the frequencies corresponding to peak loss angles for the first time, in addition to examining and validating an n = 3 track mount. Two broadband devices are also successfully evaluated by tuning damping introduced by orifice-type tracks. A special broad-tuned design utilizing a controlled ‘leakage’ path flow area is then suggested, and the role of fluid resistance in achieving the desired performance is clarified. Finally, a production mount with unknown configuration is diagnosed using the proposed models with n tracks.     

Control of modulated vibration using an enhanced adaptive filtering algorithm based on model-based approach

Conventional adaptive filtering algorithms, typically limited to the control of single or multiple sinusoids, are not appropriate to control modulated vibrations, especially in the presence of rich side band structures. To overcome this deficiency, a new control algorithm is proposed that introduces a feedback loop with the model predictive sliding mode control (MPSMC) in the adaptive filtering system. Several amplitude and frequency modulation cases are first computationally studied, and conventional and proposed methods are comparatively evaluated in terms of estimation error, performance in time and frequency domains, stability, and uncertainty in the reference signal. To experimentally validate the proposed algorithm, an active strut (with longitudinal vibrations) is constructed. Overall, the proposed adaptive algorithm yields superior reductions at the main frequencies and at side bands; also, good attenuation is found on a broadband basis.     

A Convenient Method of Benzylic Oxidation with Pyridinium Chlorochromate

Oxidation of indans and tetralin derivatives to their corresponding indanones and tetralones is of considerable value i n organic synthesis and many methods have been reported for accomplishing this conversion. Traditionally these oxidations are performed with chromic acid in acetic acid and the yields in general are moderate. Recently Eisenbraun4 has studied indetail the benzylic oxidation with the Jones reagent and compared the selectivity and yield of oxidation with other chromium(V1) reagents like bipyridinim chlorochrmate, (BiPCC). It was found that there was no improvement in yield and in the case of BiPCC a molar ratio 16% 1 (oxidant: substrate) was employed to get