Deposition of boron nitride on graphite at 1300 K

A method for the deposition of BN onto graphite and other substrates is described. Boron trichloride (BCl₃) and ammonia (NH₃) diluted with Ar were used as reacting gases. The deposition process was carried out at 1300 K as well as lower temperatures in an open system at pressures of 1 atm. The consequences of the introduction of hydrogen to the system were considered. It was demonstrated that the replacement of argon with hydrogen increases the efficiency of the process as well as the theoretical rate of BN deposition. However, the acceleration of the deposition seems to be unprofitable, because the resulting supersaturation leads to the formation of an amorphous phase. The modification of the experimental conditions were proposed.Dedicated to Professor Dr. rer. nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday     

Optimization of Pressurized Liquid Extraction of Lycopodiaceae Alkaloids Obtained from Two Lycopodium Species

Alkaloids of the Lycopodiaceae family are of great interest to researchers due to their numerous properties and wide applications in medicine. They play a very important role mainly due to their potent antioxidant, antidepressant effects and a reversible ability to inhibit acetylcholinesterase (AChE) enzyme activity. This property is of immense importance due to the growing problem of an increasing number of patients with neurodegenerative diseases in developed countries and a lack of effective and efficient treatment for them. Numerous studies have shown that Lycopodiaceae alkaloids are a rich source of AChE inhibitors. In the obtaining of new therapeutic phytochemicals from plant material, the extraction process and its efficiency is crucial. Therefore, the aim of this work was to optimize the conditions of modern PLE to obtain bioactive alkaloids from two Lycopodium species: L. clavatum L. and L. annotinum L. Five different solvents of different polarity were used for prepared plant extracts in order to compare the alkaloid content in and thereby effectiveness of the entire extraction. PLE parameters were used based on multiple studies conducted that gave the highest alkaloids recovery. Crude extracts were purified using solid-phase extraction (SPE) on Oasis HLB cartridge and examined by HPLC/ESI-QTOF–MS of the highly abundant alkaloids. To the best of our knowledge, this is the first time such high recoveries have been obtained for known Lycopodiaceae alkaloids. The best extraction results of alkaloid-lycopodine were detected in the dichloromethane extract from L. clavatum, where the yield exceeded 45%. The high recovery of annotinine above 40% presented in L. annotinum was noticed in dichloromethane and ethyl acetate extracts. Moreover, chromatograms were obtained with all isolated alkaloids and the best separation and quality of the bands in methanolic extracts. Interestingly, no alkaloid amounts were detected in cyclohexane extracts belonging to the non-polar solvent. These results could be helpful for understanding and optimizing the best conditions for isolating potent AChE inhibitors.     

Cationic Bismuth Aminotroponiminates: Charge Controls Redox Properties

The behavior of the redox-active aminotroponiminate (ATI) ligand in the coordination sphere of bismuth has been investigated in neutral and cationic compounds, [Bi(ATI)₃] and [Bi(ATI)₂L_n][A] (L=neutral ligand; n=0, 1; A=counteranion). Their coordination chemistry in solution and in the solid state has been analyzed through (variable-temperature) NMR spectroscopy, line-shape analysis, and single-crystal X-ray diffraction analyses, and their Lewis acidity has been evaluated by using the Gutmann–Beckett method (and modifications thereof). Cyclic voltammetry, in combination with DFT calculations, indicates that switching between ligand- and metal-centered redox events is possible by altering the charge of the compounds from 0 in neutral species to +1 in cationic compounds. This adds important facets to the rich redox chemistry of ATIs and to the redox chemistry of bismuth compounds, which is, so far, largely unexplored.     

Boron- versus Nitrogen-Centered Nucleophilic Reactivity of (Cyano)hydroboryl Anions: Synthesis of Cyano(hydro)organoboranes and 2-Aza-1,4-diborabutatrienes

Cyclic alkyl(amino)carbene-stabilized (cyano)hydroboryl anions were synthesized by deprotonation of (cyano)dihydroborane precursors. While they display boron-centered nucleophilic reactivity towards organohalides, generating fully unsymmetrically substituted cyano(hydro)organoboranes, they show cyano-nitrogen-centered nucleophilic reactivity towards haloboranes, resulting in the formation of hitherto unknown linear 2-aza-1,4-diborabutatrienes.     

Methods for parallel computation of SCF NMR chemical shifts by GIAO method: Efficient integral calculation,multi-Fock algorithm,and pseudodiagonalization

We implemented our gauge-including atomic orbital (GIAO) NMR chemical shielding program on a workstation cluster, using the parallel virtual machine (PVM) message-passing system. On a modest number of nodes, we achieved close to linear speedup. This program is characterized by several novel features. It uses the new integral program of Wolinski that calculates integrals in vectorized batches, increases efficiency, and simplifies parallelization. The self-consistent field (SCF) step includes a multi-Fock algorithm, i.e., the simultaneous calculation of several Fock matrices with the same integral set, increasing the efficiency of the direct SCF procedure. The SCF diagonalization step, which is difficult to parallelize, has been replaced by pseudodiagonalization. The latter, widely used in semiempirical programs, becomes important in ab initio type calculations above a certain size, because the ultimate scaling of the diagonalization step is steeper than that of integral computation. Examples of the calculation of the NMR shieldings in large systems at the SCF level are shown. Parallelization of the density functional code is underway. © 1997 by John Wiley & Sons, Inc. J Comput Chem 18: 816–825, 1997     

Copolymers of 7-oxabicyclo[2.2.1] heptane with 1,3-dioxane and promesogenic telechelic oligomers thereof

Copolymers of 7-oxabicyclo[2.2.1] heptane (B) (and of its 2-methyl derivatives) with 1,3-dioxane (D) were obtained by cationic copolymerization initiated with benzoylium hexafluoroantimonate. Structure of copolymers was determined by ₁H- and ₁₃C-NMR. The proportion of the acetal bonds in copolymers was additionally confirmed in studies of the products of hydrolysis (only the acetal bonds hydrolyze). D is unable to homopolymerize for the thermodynamic reasons and therefore mostly pseudoperiodic copolymers (-DB_x-)_y are formed. Nevertheless, the reshuffling reactions are responsible for the appearance of “wrong” units. These are: the separate oxymethylene and oxy-1,3-propylene units (P, subunits of D) located between two B units. Only the acetal bonds are cleaved in the acidic hydrolysis with dilute HCl. This gives the promesogenic telechelic oligomers of mostly HO-P-B_x-OH structure. This article is the first to describe successful cationic copolymerization of a cyclic acetal with a cyclic ether. Moreover, the inability of D to homopolymerize gives the thermodynamic basis of the pseudoperiodic copolymer formation. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1733–1742, 1997     

A comprehensive analysis in one run – in-depth conformation studies of protein–polymer chimeras by asymmetrical flow field-flow fractionation

Polymer-based protein engineering has enabled the synthesis of a variety of protein–polymer conjugates that are widely applicable in therapeutic, diagnostic and biotechnological industries. Accurate characterizations of physical–chemical properties, in particular, molar masses, sizes, composition and their dispersities are critical parameters that determine the functionality and conformation of protein–polymer conjugates and are important for creating reproducible manufacturing processes. Most of the current characterization techniques suffer from fundamental limitations and do not provide an accurate understanding of a sample''s true nature. In this paper, we demonstrate the advantage of asymmetrical flow field-flow fractionation (AF4) coupled with multiple detectors for the characterization of a library of complex, zwitterionic and neutral protein–polymer conjugates. This method allows for determination of intrinsic physical properties of protein–polymer chimeras from a single, rapid measurement.

Precise characterization of structural parameters and their polydispersities of protein–polymer conjugates is performed with rapid analysis using asymmetrical flow field-flow fractionation coupled with multiple detectors.     

Synthesis and Preliminary Anticancer Activity Assessment of N-Glycosides of 2-Amino-1,3,4-thiadiazoles

The addition of 2-amino-1,3,4-thiadiazole derivatives with parallel iodination of differently protected glycals has been achieved using a double molar excess of molecular iodine under mild conditions. The corresponding thiadiazole derivatives of N-glycosides were obtained in good yields and anomeric selectivity. The usage of iodine as a catalyst makes this method easy, inexpensive, and successfully useable in reactions with sugars. Thiadiazole derivatives were tested in a panel of three tumor cell lines, MCF-7, HCT116, and HeLa. These compounds initiated biological response in investigated tumor models in a different rate. The MCF-7 is resistant to the tested compounds, and the cytometry assay indicated low increase in cell numbers in the sub- G1 phase. The most sensitive are HCT-116 and HeLa cells. The thiadiazole derivatives have a pro-apoptotic effect on HCT-116 cells. In the case of the HeLa cells, an increase in the number of cells in the sub-G1- phase and the induction of apoptosis was observed.     

Biomimetic Ketone Reduction by Disulfide Radical Anion

The conversion of ribonucleosides to 2′-deoxyribonucleosides is catalyzed by ribonucleoside reductase enzymes in nature. One of the key steps in this complex radical mechanism is the reduction of the 3′-ketodeoxynucleotide by a pair of cysteine residues, providing the electrons via a disulfide radical anion (RSSR^•−) in the active site of the enzyme. In the present study, the bioinspired conversion of ketones to corresponding alcohols was achieved by the intermediacy of disulfide radical anion of cysteine (CysSSCys)^•− in water. High concentration of cysteine and pH 10.6 are necessary for high-yielding reactions. The photoinitiated radical chain reaction includes the one-electron reduction of carbonyl moiety by disulfide radical anion, protonation of the resulting ketyl radical anion by water, and H-atom abstraction from CysSH. The (CysSSCys)^•− transient species generated by ionizing radiation in aqueous solutions allowed the measurement of kinetic data with ketones by pulse radiolysis. By measuring the rate of the decay of (CysSSCys)^•− at λ_max = 420 nm at various concentrations of ketones, we found the rate constants of three cyclic ketones to be in the range of 10⁴–10⁵ M⁻¹s⁻¹ at ~22 °C.     

l-Arginine Improves Solubility and ANTI SARS-CoV-2 Mpro Activity of Rutin but Not the Antiviral Activity in Cells

The COVID-19 pandemic outbreak prompts an urgent need for efficient therapeutics, and repurposing of known drugs has been extensively used in an attempt to get to anti-SARS-CoV-2 agents in the shortest possible time. The glycoside rutin shows manifold pharmacological activities and, despite its use being limited by its poor solubility in water, it is the active principle of many pharmaceutical preparations. We herein report our in silico and experimental investigations of rutin as a SARS-CoV-2 Mpro inhibitor and of its water solubility improvement obtained by mixing it with l-arginine. Tests of the rutin/l-arginine mixture in a cellular model of SARS-CoV-2 infection highlighted that the mixture still suffers from unfavorable pharmacokinetic properties, but nonetheless, the results of this study suggest that rutin might be a good starting point for hit optimization.