Electronic structure of lanthanum transition-metal oxyarsenides LaMAsO (M = Fe,Co, Ni) and LaFe1−xM′xAsO (M′ = Co,Ni) by X-ray photoelectron and absorption spectroscopy

The electronic structures of the quaternary oxyarsenides LaMAsO (M = Fe, Co, Ni) were examined with X-ray photoelectron spectroscopy (XPS) and X-ray absorption near-edge spectroscopy (XANES). Interpretation of the metal 2p_3/2 and arsenic 3d_5/2 binding energies, as well as a satellite feature in the Co 2p XPS spectrum, suggests charges that are much less extreme than expected (i.e., not M²⁺ and As^3?) because of the strong covalent character within the M–As bonds. As M is varied, the differing degrees of charge transfer from M to As atoms within these bonds are manifested by shifts in the As 3d_5/2 binding energies and changes in the As K-edge intensities. This charge transfer is isolated within the [MAs] layer and does not influence the O 1s and La 3d XPS spectra. Fitting the experimental valence band spectra of these oxyarsenides LaMAsO yielded electron populations of states that support the formal charge assignment [La³⁺O^2?][M²⁺As^3?]. The mixed-metal series LaFe_1?xM′_xAsO (M′ = Co, Ni) was examined by XANES; analysis of the metal K- and L-edges, as well as of the Co 2p XPS satellite feature, revealed that no metal–metal charge transfer takes place.     

Synthesis and characterisation of the SrxBa1−xFeO3−y-system and the fluorinated phases SrxBa1−xFeO2F

Compounds in the system Sr_xBa_1?xFeO_3?y have been prepared under different partial pressures of oxygen. In this system, different perovskite-type structures are found depending highly on the values of x and y. Fluorination using polyvinylidenedifluoride (PVDF) gives oxyfluoride materials of composition Sr_xBa_1?xFeO₂F, which normally crystallize in the cubic perovskite structure. Rietveld refinement results provide information about the packing density for oxide and oxyfluoride samples and allow a general comparison between these two different types of materials. Furthermore, the determination of the average iron oxidation state also showed that the oxygen deficiency, y, depends significantly on the value of x and the structure determined by the Sr/Ba ratio.     

Determination of phosphate using a highly sensitive paired emitter-detector diode photometric flow detector

The use of a novel inexpensive photometric device, a paired emitter-detector diode (PEDD) has been applied to the colorimetric determination of phosphate using the malachite green spectrophotometric method. The novel miniaturized flow detector applied within this manifold is a highly sensitive, low cost, miniaturized light emitting diode (LED) based detector. The optical flow cell was constructed from two LEDs, whereby one is the light source and the second is the light detector, with the LED light source forward biased and the LED detector reversed biased. The photocurrent generated by the LED light source discharges the junction capacitance of the detector diode from 5 V (logic 1) to 1.7 V (logic 0) and the time taken for this process to occur is measured using a simple timer circuit.The malachite green (MG) method employed for phosphate determination is based on the formation of a green molybdophosphoric acid complex, the intensity of which is directly related to phosphate concentration. Optimum analytical parameters such as reaction kinetics, reagent to sample concentration ratio and emitter wavelength intensity were investigated for the spectrophotometric method. Linear calibration plots that obeyed the Beer-Lambert law were obtained for phosphate in the range of 0.02-2 μM. The dynamic range, sensitivity and limits of detection are reported.     

Synthesis of tetrahydropyrido[2,3-b]pyrazine scaffolds from 2,3,5,6-tetrafluoropyridine derivatives

Reactions between N,N′-dimethylethylene diamine and a range of 2,3,5,6-tetrafluoropyridine derivatives provided ready access to the corresponding tetrahydropyrido[2,3-b]pyrazine systems if the substituent located at the 4-position of the pyridine ring was either hydrogen or an electron withdrawing substituent. In contrast, the presence of electron donating substituents at the 4-position made the formation of ring-fused products much more difficult. The two-step sequential nucleophilic substitution procedures from pentafluoropyridine gave convenient and adaptable methodology for the synthesis of polyfunctional tetrahydropyrido[2,3-b]pyrazine scaffolds of interest to the life science discovery arenas.     

Structural studies of apatite-type oxide ion conductors doped with cobalt

A series of Co doped lanthanum silicate apatite-type phases, La9.83Si4.5Co1.5O26, La9.66Si5CoO26, La10Si5CoO26.5 and La8BaCoSi6O26, have been synthesised, and neutron diffraction, EXAFS and XANES used to investigate their structures in detail. All compositions were shown to possess the hexagonal apatite structure, and the results confirmed that cobalt can be doped onto both the La and Si sites within the structure depending on the starting composition. The Co doping is shown to cause considerable local distortions within the apatite structure. In the case of Si site doping two compositions showed anisotropic peak broadening, which has been attributed to incommensurate ordering of oxygen within the apatite channels.     

End-labeled free-solution electrophoresis of DNA

DNA is a free-draining polymer. This subtle but "unfortunate" property of highly charged polyelectrolytes makes it impossible to separate nucleic acids by free-flow electrophoresis. This is why one must typically use a sieving matrix, such as a gel or an entangled polymer solution, in order to obtain some electrophoretic size separation. An alternative approach consists of breaking the charge to friction balance of free-draining DNA molecules. This can be achieved by labeling the DNA with a large, uncharged molecule (essentially a hydrodynamic parachute, which we also call a drag-tag) prior to electrophoresis; the resulting methodology is called end-labeled free-solution electrophoresis (ELFSE). In this article, we review the development of ELFSE over the last decade. In particular, we examine the theoretical concepts used to predict the ultimate performance of ELFSE for single-stranded (ssDNA) sequencing, the experimental results showing that ELFSE can indeed overcome the free-draining issue raised above, and the technological advances that are needed to speed the development of competitive ELFSE-based sequencing and separation technologies. Finally, we also review the reverse process, called free-solution conjugate electrophoresis (FSCE), wherein uncharged polymers of different sizes can be analyzed using a short DNA molecule as an electrophoretic engine.     

Structural,Magnetic and Catalytic Properties of a New Vacancy Ordered Perovskite Type Barium Cobaltate BaCoO2.67

A new vacancy ordered, anion deficient perovskite modification with composition of BaCoO_2.67 (Ba₃Co₃O₈□₁) has been prepared via a two-step heating process. Combined Rietveld analysis of neutron and X-ray powder diffraction data shows a novel ordering of oxygen vacancies not known before for barium cobaltates. A combination of neutron powder diffraction, magnetic measurements, and density functional theory (DFT) studies confirms G-type antiferromagnetic ordering. From impedance measurements, the electronic conductivity of the order of 10⁻⁴ S cm⁻¹ is determined. Remarkably, the bifunctional catalytic activity for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) is found to be comparable to that of Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3–y, confirming that charge-ordered anion deficient non-cubic perovskites can be highly efficient catalysts.     

Electrophoresis in the presence of gradients: I. Viscosity gradients

In many cases, the resolution provided by capillary electrophoresis systems approaches that predicted for diffusion-limited separations. Once all device-related sources of band broadening have been eliminated or minimized, only thermal diffusion remains. In principle, peaks can be sharpened using gradients of various system characteristics such as gel concentration, buffer viscosity and electric field. However, it is not clear whether this can actually increase the resolution of the system. In this article, we focus our attention on viscosity gradients and we examine both continuous and step-like variations. Our results indicate that the performance of electrophoretic systems cannot be improved by viscosity gradients. They may provide extra stacking, and thus improve the resolution, when the injection width is non-negligible. However, for the systems considered here, the best resolution is obtained when the viscosity is uniform and the stacking is entirely performed at injection. We conclude by discussing the link between these results, the fundamental laws of thermodynamics, the nature of the detection process and the importance of having nonlinear effects in nonuniform systems.     

Analysis of 13C-mixed triacylglycerol in stool by bulk (EA-IRMS) and compound specific (GC/MS) methods

This paper was presented in poster form at the 17th International Congress of Nutrition, August 27-31, Vienna, Austria (Annals of Nutrition & Metabolism 2001; 45(Suppl.1):349). Some of the data were also presented in poster form at the British Society of Gastroenterology Meeting, March 18-21, Glasgow, UK (Gut 2001; 48(Suppl.1):A91). The 13C-mixed triacylglycerol (MTG) breath test is used to measure intraluminal fat digestion. In normal digestion, 20-40% of the ingested 13C label is recovered in breath CO2. We aimed to identify the proportions of ingested label excreted in stool, as well as breath following ingestion of 13C-MTG by children with impaired exocrine pancreatic function and healthy controls. 13C enrichment of breath samples was measured by continuous flow isotope ratio mass spectrometry (IRMS) and cumulative percent dose recovered (cPDR) in 10 h was calculated. Total 13C of a faecal fat extract from each stool was measured by elemental analyser-IRMS, and 13C enrichment and concentration of the TBDMS derivative of octanoic acid was measured by GC/MS after hydrolysis of the fat extract. Stool 5-day cPDR was calculated. Mean breath cPDR was 35%. Mean cPDR in stool by combustion-IRMS and GC/ MS, respectively, was 0.8% and 1.0%. Therefore, the remaining 64% of the 13C label must remain in the body and variability in breath cPDR is due to postabsorptive rather than predigestive factors.     

A linear algorithm for a core of a tree

A core of a graph G is a path P in G that is central with respect to the property of minimizing d(P) = Σ_υ?V(G)d(υ, P), where d(υ, P) is the distance from vertex υ to path P. We present a linear algorithm for finding a core of a tree. Since the core of a graph is not necessarily unique, we also output a list of all the vertices which are in some core.