Polyamine-based anion receptors: Extraction and structural studies

In the discussion that follows some of the more recent progress in the area of anion binding by synthetic polyamine receptors is presented, with emphasis given to work undertaken by the authors’ groups. A continuing theme in these studies has been the relationship between receptor structure and its anion extraction properties.Systematic solvent extraction and structural studies for halide and perrhenate complexes with polyamines of tripodal, macrocyclic and macrobicyclic architecture that contain both aromatic moieties and four to eight amine functions have been performed in order to derive relevant structure-binding/extractability relationships. The results demonstrate that the binding and extraction behaviour of the polyamines towards halides and perrhenate is a complex function of their structural features, degree of protonation and lipophilic properties. The extraction is characterized by the preferred formation of mono- and diprotonated amine species in the organic phase. X-ray structure studies of iodide and perrhenate complexes with open-chain tetraamino derivatives and octaamino cryptands in different protonation states lead to the conclusion that in the first case only limited chelation of the anion occurs and in the second only highly protonated species are able to encapsulate the anion. The structural patterns observed are strongly influenced by the presence of water molecules in the crystals.     

Solution and X-Ray Crystal Structures of the Di- and Tetra-allyl Ether of tert- utylcalix[4]arene

The di- and tetra-allyl ethers of tert-butylcalix[4]arene 1 and 2 have been prepared by alkylation of tert-butylcalix[4]arene with allyl bromide and K₂CO₃ using different reaction times. Solution ¹H NMR measurement of the di-allyl ether 1 and X-ray crystal structures of the complexes of 1 with chloroform (1a) or methanol (1b) indicate the cone conformation of 1 in which intramolecular hydrogen bonding can be maximized. The crystalline state conformers 1a and 1b are distorted in different grades depending on the solvent. While methanol is incorporated in the macrocycle, chloroform molecules do not occupy the cage. The solution ¹H NMR spectra of tetra-allyl ether 2 show the co-existence of the cone and partial cone conformation. The partial cone conformer of 2 was investigated by X-ray crystallography. In this compound hydrogen bonding is not existent. The conformer distribution is likely affected by steric and template effects.     

The high resolution mass spectrum of 2-acetamido-1,3,4,6-tetra-O-acetyl-2-deoxy-α-D-glucopyranose

2-Acetamido-1,3,4,6-tetra-O-acetyl-2-deoxy-α-D-glucopyranose (I), and its analogs specifically mono (trideuterioacetylated) at O-1 (III), at N-2 (II), at O-4 (IV) and at O-6 (V), have been examined by high-resolution mass spectrometry. From the elemental compositions of the fragment ions, the mass-number shifts resulting from deuterium incorporation and analysis of metastable transitions, it has been possible to specify in detail the fragmentation pathways undergone by this molecule. The principal degradations of I proceed by initial rapid decomposition of the molecular ion (whose intensity is insignificant) by three routes: (i) by loss of the C-1 acetoxyl group as a radical to give the glycosyl cation (a), (ii) by loss of the 1-acetyl group as a radical to give an acyclic ion m/e 346 (b) and (iii) by loss of a C-6 fragment and acetic acid derived from the 3-acetate group to give m/e 241 (c).     

Metallorganische verbindungen der lanthanoide CVIII. Synthese und strukturaufklärung monomerer organolanthanoidacetate

LnCl₃ reacts with Na(C₅Me₄¹Bu) in THF to form the organolanthanoid chlorides [(C₅Me₄¹Bu)₂LnCl(THF)] (Ln = La (1a), Lu (1b)). Compounds 1a and 1b yield in reaction with NaO₂CCH₃ the monomeric organolanthanoid acetates [(C₅Me₄¹Bu)₂LnO₂CCH₃] (Ln = La (2a), Lu (2b)). The single crystal X-ray structure analysis of 2b as well as the cryoscopic molecular weight investigation of 2a verify the monomeric structure of these complexes.     

Microscale sample deposition onto hydrophobic target plates for trace level detection of neuropeptides in brain tissue by MALDI-MS

A sample preparation method that combines a modified target plate with a nanoscale reversed-phase column (nanocolumn) was developed for detection of neuropeptides by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). A gold-coated MALDI plate was modified with an octadecanethiol (ODT) self-assembled monolayer to create a hydrophobic surface that could concentrate peptide samples into a approximately 200-500-microm diameter spot. The spot sizes generated were comparable to those obtained for a substrate patterned with 200-microm hydrophilic spots on a hydrophobic substrate. The sample spots on the ODT-coated plate were 100-fold smaller than those formed on an unmodified gold plate with a 1-microl sample and generated 10 to 50 times higher mass sensitivity for peptide standards by MALDI-TOF MS. When the sample was deposited on an ODT-modified plate from a nanocolumn, the detection limit for peptides was as low as 20 pM for 5-microl samples corresponding to 80 amol deposited. This technique was used to analyze extracts of microwave-fixed tissue from rat brain striatum. Ninety-eight putative peptides were detected including several that had masses matching neuropeptides expected in this brain region such as substance P, rimorphin, and neurotensin. Twenty-three peptides had masses that matched peaks detected by capillary liquid chromatography with electrospray ionization MS.     

Multinuclear NMR studies and ab initio structure calculations of hindered phencyclone diels‐alder adducts from symmetrical cyclic dienophiles: Cyclohexene,vinylene carbonate,vinylene trithiocarbonate and two N‐aryl maleimides

A series of hindered Diels‐Alder adducts have been prepared from phencyclone, 1 , with various unusual symmetrical cyclic dienophiles, including cyclohexene, 2a ; vinylene carbonate, 2b ; vinylene trithiocarbonate, 2c ; and the N‐aryl maleimides: N‐(4‐dimethylamino‐3,5‐dinitrophenyl)maleimide (“Tuppy's maleimide”), 2d ; and N‐[3,5‐bis(trifluoromethyl)phenyl]maleimide, 2e . The highly hindered adducts, 3a‐e , respectively, were extensively characterized by one‐ and two‐dimensional NMR methods, observing proton, carbon‐13 and fluorine‐19. High resolution COSY45 spectra permitted rigorous proton NMR assignments. The 2D heteronuclear C‐H chemical shift correlation spectra (HETCOR, XHCORR) were obtained for adducts 3a‐d , allowing specific assignments for protonated carbons. Corrections to earlier proton NMR assignments for the vinylene carbonate adduct are given; results of the gated decoupling ¹³C NMR experiment for this adduct supported endo adduct stereochemistry. Relative proton chemical shifts for bridgehead phenyls of adduct 3c appeared anomalous relative to other adducts, suggesting possible special anisotropic interactions (with endocyclic sulfur or other anisotropic groups in the product) due to the unusual calculated orientation of the phenyls. The unsubstituted bridgehead phenyls in all adducts were shown to exhibit slow exchange limit (SEL) ¹H and ¹³C spectra on the NMR timescales at ambient temperatures (7 tesla) showing slow rotations about the C(sp³)‐C(aryl sp²) bonds. The rapid rotation of the N‐aryl rings of the maleimide adducts was indicated by fast exchange limit spectra, suggesting that ortho substitution of the N‐aryl ring may be necessary to slow this rotation to the SEL regime. Ab initio geometry optimizations at the Hartree‐Fock level were carried out for each adduct, with the 6‐31G* basis sets. Appreciable geometry differences were seen in calculated structures, and significant NMR chemical shift differences were experimentally observed, depending on the nature of the groups attached to the (Z)‐HC=CH moiety of the dienophiles.     

In-capillary micro solid-phase extraction and capillary electrophoresis separation of heterocyclic aromatic amines with nanospray mass spectrometric detection

A miniaturised technique to analyse and detect heterocyclic aromatic amines (HAs) using micro solid-phase extraction (SPE) coupled on-line (in-capillary) to capillary electrophoresis (CE) separation with nanospray (nESI) mass spectrometry (MS) detection has been developed. HAs are mutagenic and carcinogenic compounds formed at low levels in protein-rich food during cooking. Due to the low concentrations of HAs and the high complexity of the matrix in which they exist, sensitive and selective analytical methods are required for quantification. SPE was performed on a packed bed of C₁₈ particles inside the CE capillary, which minimised the dead volume. The on-line coupling of SPE, CE and nESI-MS reduced the time for extraction and identification to less than half an hour, which will allow for screening of several samples per day. The new technique provides short analysis time, low sample and solvent consumption, and HAs in standard solutions were easily detected at 12–17 fmol injections, and in spiked urine samples at 750–810 fmol injections.     

Intercalation materials for lithium rechargeable batteries

An overview is given of intercalation materials for both the negative and the positive electrodes of lithium batteries, including the results of our own research. As well as lithium metal as a negative electrode, we consider insertion materials based on aluminium alloys. In the case of the positive electrode metal-oxides based on manganese, nickel and cobalt are discussed. Received: 27 May 1997 / Accepted: 30 July 1997     

A new family of mixed-valence dinuclear rhodium complexes containing the two metal centers in different stereochemical environments

A series of dinuclear chelate complexes of the general composition [Rh2(kappa2-L)2(mu-CR2)2(mu-SbiPr3)] (R = Ph, p-Tol; L = CF3CO2-, acac-, acac-f3-) and [Rh2Cl(kappa2-L)(mu-CR2)2(mu-SbiPr3)] (R = Ph, p-Tol; L = acac-, acac-f3-) has been prepared by replacement of the chloro ligands in the precursors [Rh2Cl2(mu-CR2)2(mu-SbiPr3)] by anionic chelates. The lability of the SbiPr3 bridge in the rhodium dimers is illustrated by the reactions of [Rh2(kappa2-acac)2(mu-CR2)2(mu-SbiPr3)] (7, 8) with Lewis bases such as CO, CNtBu, and SbEt3 which lead to the formation of the substitution products [Rh2(kappa2-acac)2(mu-CR2)2(mu-L')] (13-16) in excellent yields. Treatment of 7 and 8 with sterically demanding tertiary phosphanes PR3 (R3 = iPr3, iPr2Ph, iPrPh2, Ph3) affords the mixed-valence Rh0-RhII complexes [(kappa2-acac)2Rh(mu-CPh2)2Rh(PR3)] (21-24) and [(kappa2-acac)2Rh(mu-C(p-Tol)2]2Rh(PiPr3)] (25) for which there is no precedence. The terminal PiPr3 ligand of 21 is easily displaced by alkynes, CNtBu, and CO to give, by preserving the [(kappa2-acac)2Rh(mu-CPh2)2Rh] molecular core, the related dinuclear compounds 26-31 in which the coordination number of the Rh0 center is 3, 4, or 5. The molecular structures of [Rh2Cl(kappa2-acac)(mu-CPh2)2(mu-SbiPr3)] (5), [Rh2(kappa2-acac)2(mu-CPh2)2(mu-CO)] (13), [(kappa2-acac)2Rh(mu-CPh2)2Rh(PiPr3)] (21), and [(kappa2-acac)2Rh(mu-CPh2)2Rh(CNtBu)2] (30) have been determined crystallographically.     

UHF-CI studies of energy barriers for the abstraction and exchange reactions in the system H + CH4

UHF and CI calculations, using the direct CI method, and double-zeta plus polarization functions basis sets, have been performed on the more important parts of the energy hypersurface for CH₅. The abstraction H + CH₄ → H₂ + CH₃ and the inversion substitution reaction H′ + CH₄ → CH₃H′ + H have been studied in detail. The predicted barriers for these two reactions are 13.5 and 36.6 kcal/mol, respectively. The abstraction reaction is, in agreement with experiment, found to be almost thermo-neutral with a heat of reaction of 1.5 kcal/mol.