Computational studies on 3,5,7,10,12,14,15,16-octanitro-3,5,7,10,12,14,15,16-octaaza-pentacyclo[7.5.1.12,8.04,13.06,11]hexadecane as potential high-energy-density compound

The B3LYP/6-31G(d) method of density functional theory was used to study molecular geometry, electronic structure, infrared spectrum, and thermodynamic properties. Detonation properties were evaluated using Kamlet–Jacobs equations based on the calculated density and heat of formation. Thermal stability of 3,5,7,10,12,14,15,16-octanitro-3,5,7,10,12,14,15,16-octaaza-pentacyclo[7.5.1.1^2,8.0^4,13.0^6,11]hexadecane (cage-HMX) was investigated by calculating the bond dissociation energy at unrestricted B3LYP/6-31G(d) level. The calculated results show that the first step of pyrolysis is the rupture of the N–NO₂ bond. The crystal structure obtained by molecular mechanics belongs to P2₁ space group, with lattice parameters a = 8.866 Å, b = 11.527 Å, c = 13.011 Å, Z = 4, and ρ = 2.219 g cm^?3. Both the detonation velocity of 9.79 km s^?1 and the detonation pressure of 45.45 GPa are better than those of CL-20. According to the quantitative standard of energetics and stability as a high-energy-density compound, cage-HMX essentially satisfies this requirement. These results provide basic information for molecular design of novel HEDCs.     

Efficient Oxidation of Sulfides Catalyzed by Transition Metal Salts with Molecular Oxygen in the Presence of Aldehydes

Oxidation of sulfides to sulfoxides and sulfones was achieved in moderate to high yields with a good selectivity, by using Fe₂O₃, MnO₂, Cu(OH)₂ and Cu(OAc)₂ as catalyst, with molecular oxygen in the presence of isovaleraldehyde under mild conditions.     

Accelerating Effect of Bio-Reduced Graphene Oxide on Decolorization of Acid Red 18 by Shewanella algae

In this study, the effects of bio-reduced graphene oxide (BRGO) on the bio-reduction of Acid Red 18 (AR 18) by Shewanella algae were first investigated, and a possible mechanism of BRGO-mediated AR 18 bio-decolorization was proposed. The prepared BRGO was characterized by X-ray photoelectron spectroscopy (XPS), X-ray diffractometer (XRD), infrared spectroscopy (IR), Raman spectra, and transmission electron microscope (TEM), respectively. Moreover, electrochemical experiment demonstrated that BRGO is of good electrical conductivity. AR 18 bio-decolorization could be enhanced in dose-dependent manner of BRGO. The maximum increase in AR 18 removal efficiency was observed at a dose of 0.075 g L^?1 BRGO. Under the same conditions, BRGO could also improve the decolorization rates of Acid Red 88, Acid Red 27, and Acid Red 73. During decolorization, the formation of BRGO and cells composite was observed, which is beneficial for transferring electrons from cells to BRGO. In addition, BRGO could accelerate the bio-decolorization of AR 18 under saline conditions (2–7 %). These findings indicate that BRGO can accelerate the electrons transfer from cells to azo dyes.     

基于毛竹叶片理化参数的刚竹毒蛾危害检测研究

虫害检测算法研究是开展虫害快速、准确监测，制定精准森防检疫措施的重要基础。以毛竹叶片为研究尺度，基于刚竹毒蛾危害下的寄主外部形态与内部生理现象总结，选择并实测叶损量LL、相对叶绿素含量RCC、相对含水量RWC、原始光谱的733.66~898.56 nm值(ρ_{733.66~898.56})、一阶微分光谱的562.95~585.25 nm值(ρ′_{562.95~585.25})与706.18~725.41 nm值(ρ′_{706.18~725.41})等理化参数，随机划分实验组(63组)和验证组(37组)并设计5次重复实验；分别运用Fisher判别分析、BP神经网络、随机森林等三种方法建立刚竹毒蛾危害等级的检测模型，从检测精度、Kappa系数及R2等指标对模型的检测效果予以分析和比较。结果显示，Fisher判别分析、BP神经网络、随机森林的检测精度分别为69.19%，65.41%，83.78%，Kappa系数分别为0.576 9，0.532 4和0.778 8，R2分别为0.722 2，0.582 6和0.870 9，总体而言，三种方法均具备刚竹毒蛾危害的检测能力，随机森林的检测效果最优，Fisher判别分析次之，再次为BP神经网络；从分等级来看，随机森林的检测精度亦优于Fisher判别分析与BP神经网络，但3种方法对中度危害等级的检测精度均有所不足。该成果可为刚竹毒蛾危害及其他病虫害检测算法的选择提供参考，并为进一步建立冠层、遥感影像像元等尺度的虫害检测模型奠定基础。     

Tailorable PC71BM Isomers: Using the Most Prevalent Electron Acceptor to Obtain High‐Performance Polymer Solar Cells

Despite being widely used as electron acceptor in polymer solar cells, commercially available PC₇₁BM (phenyl‐C₇₁‐butyric acid methyl ester) usually has a “random” composition of mixed regioisomers or stereoisomers. Here PC₇₁BM has been isolated into three typical isomers, α‐, β₁‐ and β₂‐PC₇₁BM, to establish the isomer‐dependent photovoltaic performance on changing the ternary composition of α‐, β₁‐ and β₂‐PC₇₁BM. Mixing the isomers in a ratio of α/β₁/β₂=8:1:1 resulted in the best power conversion efficiency (PCE) of 7.67 % for the polymer solar cells with PTB7:PC₇₁BM as photoactive layer (PTB7=poly[[4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl]]). The three typical PC₇₁BM isomers, even though sharing similar LUMO energy levels and light absorption, render starkly different photovoltaic performances with average‐performing PCE of 1.28–7.44 % due to diverse self‐aggregation of individual or mixed PC₇₁BM isomers in the otherwise same polymer solar cells.