Validated Stability-Indicating Chromatographic Methods for the Determination of Veralipride in Presence of Its Degradation Products

Two sensitive and selective chromatographic methods were developed and validated for determination of veralipride in presence of its degradation products. Forced degradation studies were performed, using HCl, NaOH and 3% H₂O₂. The first method is based on thin-layer chromatographic separation of the intact drug spot from its degradation, followed by densitometric measurements. The second method is based on isocratic liquid chromatographic separation of the studied drug from its degradation on a reversed phase C₁₈ column. The proposed LC method was utilized to investigate the kinetics of alkaline degradation process of the selected drug at different temperatures.     

Development and validation of a multiresidue method for determination of 82 pesticides in water using GC

Several methods used for the multiresidue analysis of pesticides from the environment and drinking water have been reported. However, most of these reports dealt with a small number of targeted pesticides or some special groups. A method that is simple, faster, and more cost‐effective than the environmental protection agency (EPA) method has been developed for the analysis of 82 frequently used pesticides in water samples obtained from Yeongsan and Sumjin rivers, as well as rice fields located in various locations around the two rivers. The samples were extracted by dichloromethane, and the pesticides were analyzed using a GC‐electron capture detector (ECD), followed by confirmation with GC‐MS. Recoveries were found to be between 82 and 120.1% for most of the tested pesticides, which were in agreement with the standard values dictated by the EPA. The method was potentially applied to 66 water samples for human consumption and 90 water samples from the rice fields and irrigation ditches that were collected from June to September 2007. Oxadiazon, butachlor, and alachlor were detected in some of the river water samples collected in June, iprobenfos (IBP) was detected in samples collected in August, and no pesticide was detected in September. On the other hand, chlorpyrifos‐methyl, IBP, hexaconazole, diazinon, oxadiazon, butachlor, and isoprothiolane were detected at relatively high concentrations in 48 rice paddy field water samples collected between June and September 2007. Alachlor in one sample and procymidone in some of the rice paddy field water samples were also detected in trace amounts. The results were consistent with the temporal pattern of pesticide application in Korean rice fields.     

A generalization of a theorem by Bigard–Keimel and Conrad–Diem

Let G be an archimedean ℓ-group and \mathfrakP(G){\mathfrak{P}(G)} denote the set of all polar preserving bounded group endomorphisms of G. Bigard and Keimel in [Bull. Soc. Math. France 97 (1969), 381–398] and, independently, Conrad and Diem in [Illinois J. Math. 15 (1971), 222–240] proved that \mathfrakP(G){\mathfrak{P}(G)} is an archimedean ℓ-group with respect to the pointwise addition and ordering. This classical result is extended in this paper to certain sets of disjointness preserving bounded homomorphisms on archimedean ℓ-groups.     

A Third‐Generation Hydrogen Peroxide Biosensor Based on Horseradish Peroxidase Covalently Immobilized on Electrografted Organic Film on Screen‐Printed Carbon Electrode

A new convenient strategy to fabricate a third‐generation hydrogen peroxide biosensor was described. The screen‐printed carbon electrode (SPCE) was first modified with a layer of 4‐nitrophenyl assembled from the 4‐nitroaniline diazonium salt synthesized in situ in acidic aqueous solution. Next, the nitro groups were converted to amines followed by crosslinking to the horseradish peroxidase (HRP) by glutaraldehyde. The redox chemistry of the active center of the HRP was observed and the HRP‐modified electrode displayed electrocatalytic activity towards the reduction of hydrogen peroxide (H₂O₂) without any mediators. H₂O₂ was determined in a linear range from 5.0 μM to 50.0 μM, with a detection limit of 1.0 μM. Furthermore, the biosensor exhibited fast amperometric response, good reproducibility and long‐term stability.     

Measurements of the thermal neutron cross-sections and resonance integrals for 186W (n,γ) 187W and 98Mo (n,γ) 99Mo reactions

The thermal neutron cross-sections and resonance integrals of the ¹⁸⁶W (n,γ) ¹⁸⁷W and ⁹⁸Mo (n,γ) ⁹⁹Mo reactions in the thermal and 1/E regions, respectively, of a thermal reactor neutron spectrum have been experimentally determined by the activation method using ¹⁹⁷Au (n,γ) ¹⁹⁸Au reaction as a single comparator. The high purity natural W, Mo, and Zr foils; and Au wire diluted in aluminum, were irradiated without Cd shield in two neutron irradiation sites, characterized with different values for the thermal-to-epithermal flux ratios, f at the Second Egyptian Research Reactor (ETRR-2). The induced activities in the samples were measured by high-resolution γ-ray spectrometry with a calibrated germanium detector. Thermal neutron cross-sections for 2200 m/s neutrons and resonance integrals for the ¹⁸⁶W (n,γ) ¹⁸⁷W and ⁹⁸Mo (n,γ) ⁹⁹Mo reactions have been obtained relative to the reference values, σ₀ = 98.65 ± 0.09 b and I ₀ = 1500 ± 28 b for the ¹⁹⁷Au (n,γ) ¹⁹⁸Au reaction. The necessary correction factors for thermal neutron and resonance neutron self-shielding effects, and the epithermal flux index (α) were taken into account in the determinations. The results obtained were: σ₀ = 38.43 ± 0.4 b and I ₀ = 502 ± 65 b for ¹⁸⁶W (n,γ) ¹⁸⁷W, and σ₀ = 0.137 ± 0.014 band I ₀ = 6.47 ± 0.8 for ⁹⁸Mo (n,γ) ⁹⁹Mo. These results are discussed and compared with previous measurements and evaluated data in literature. The traditional method of determining thermal cross-sections and resonance integrals via neutron irradiation with and without Cd shield in one irradiation position was avoided in this work by neutron irradiation without Cd shield in at least two different neutron irradiation positions. This method provides alternative way for determining thermal cross-sections and resonance integrals simultaneously.     

Organic synthesis and biological evaluation of novel “3 + 1” mixed ligands of technetium-99m Gabapentin as receptor imaging agents

This work focuses on the “3 + 1” mixed ligands of ^99mTc labeled Gabapentin as α2δ receptor imaging agents in the brain. Gabapentin 1-(aminomethyl)cyclohexanacetic acid as monodentate and two tridentates: tridentate A; 3-(2-imino-thiozolidin-4-one)-quinozoline-4-(3H)-one and tridentate B; N-(4-chlorophenyl)-2-imino-2H-chromene-3-Carbothioamide which were synthesized and characterized by infrared analysis (IR), ¹H nuclear magnetic resonance (NMR), and mass spectrum. ^99mTc-complexes were prepared by the “3 + 1” mixed ligand approach. The labeling conditions were optimized and the complexes was extracted by chloroform and purified by high performance liquid chromatography. ^99mTc-complexs were lipophilic and stable for at least 8–12 h at room temperature. The biodistribution of the ^99mTc-complexes was evaluated in mice. The brain uptake was 4.5% and 3.5% ID/g (percentage of the injected dose per gram) at 5 min, and the retention was 1.5% and 1.7% ID/g at 120 min for ^99mTc-complex A and ^99mTc-complex B, respectively.     

Net analyte signal standard addition method (NASSAM) as a novel spectrofluorimetric and spectrophotometric technique for simultaneous determination,application to assay of melatonin and pyridoxine

In this work a new modification of the standard addition method called “net analyte signal standard addition method (NASSAM)” is presented for the simultaneous spectrofluorimetric and spectrophotometric analysis. The proposed method combines the advantages of standard addition method with those of net analyte signal concept. The method can be applied for the determination of analyte in the presence of known interferents. The accuracy of the predictions against H-point standard addition method is not dependent on the shape of the analyte and interferent spectra. The method was successfully applied to simultaneous spectrofluorimetric and spectrophotometric determination of pyridoxine (PY) and melatonin (MT) in synthetic mixtures and in a pharmaceutical formulation.     

1‐Pyrrolidine Dicarbodithioate Based Electrodes for Determination of Iron(III) in Lubrication Oil

The lipophillic ammonium salt of 1‐pyrrolidine dicarbodithioic acid (PCDT) (I) was introduced as a new selective ionophore for an iron selective electrode. In addition, the effect of immobilization of 18‐crown‐6 (18CE6) (membrane type‐II), on the electrode performance was discussed. The slope of the PCDT‐based (I) electrode was (20 mV/decade). The linear concentration range was (10^?5–10^?1 M) after one day doping. The detection limit for electrode type‐(II) was (1.3×10^?6 M). For membrane with only 18CE6 (type‐III) the linear range and the detection limit were improved (10^?5–10^?1 M and 3.2×10^?6 M, respectively). The pH‐range was between 5–11 for type‐II, and III electrodes, while it was 7–11 for type‐I electrode. Most of the common cations were tested for the evaluation of the electrode selectivity with correlation to the ionic radii of the tested cations. Among them only Ag⁺ and Pb²⁺ were the real interference for type‐III electrode. Application of using the electrode for the determination of iron in lubrication oil samples was performed with RSD (1.77–2.7%) and (1.01–2.3%) for type‐II and III electrodes, respectively. The corresponding recovery ranges were (93.0–99.9%) and (96.3–100%). The obtained results were compared to those of an atomic absorption spectrophotometric method.     

Analysis of the chemical composition of the essential oil of Polygonum minus Huds. using two-dimensional gas chromatography-time-of-flight mass spectrometry (GC-TOF MS)

The essential oil in leaves of Polygonum minus Huds., a local aromatic plant, were identified by a pipeline of gas chromatography (GC) techniques coupled with mass-spectrometry (MS), flame ionization detector (FID) and two dimensional gas chromatography time of flight mass spectrometry (GC x GC-TOF MS). A total of 48 compounds with a good match and high probability values were identified using this technique. Meanwhile, 42 compounds were successfully identified in this study using GC-MS, a significantly larger number than in previous studies. GC-FID was used in determining the retention indices of chemical components in P. minus essential oil. The result also showed the efficiency and reliability were greatly improved when chemometric methods and retention indices were used in identification and quantification of chemical components in plant essential oil.     

Interaction of Metal Complexes with G‐Quadruplex DNA

Guanine‐rich sequences of DNA can assemble into tetrastranded structures known as G‐quadruplexes. It has been suggested that these secondary DNA structures could be involved in the regulation of several key biological processes. In the human genome, guanine‐rich sequences with the potential to form G‐quadruplexes exist in the telomere as well as in promoter regions of certain oncogenes. The identification of these sequences as novel targets for the development of anticancer drugs has sparked great interest in the design of molecules that can interact with quadruplex DNA. While most reported quadruplex DNA binders are based on purely organic templates, numerous metal complexes have more recently been shown to interact effectively with this DNA secondary structure. This Review provides an overview of the important roles that metal complexes can play as quadruplex DNA binding molecules, highlighting the unique properties metals can confer to these molecules.