Effect of NH4I and I2 concentration on agar gel polymer electrolyte properties for a dye-sensitized solar cell

Gel polymer electrolytes were prepared using agar polymer host, NH₄I, and I₂ salts. The sample of agar paste with 1.0 M of NH₄I and 0.2 μM of I₂ exhibits the highest conductivity and lowest viscosity values at room temperature of (2.64?±?0.19)?×?10^?3?S?cm^?1 and 1.17?±?0.29 Pa?s, respectively. All of the gel polymer electrolytes display Arrhenian behavior, and the optimum agar paste gave the lowest activation energy of 0.25 eV. It also had a good physical appearance compared with the other samples. This gel polymer electrolyte had a good potential and was applicable to a role as electrolyte in ITO-ZnO (N719 dye)/agar paste?+?1.0 M NH₄I?+?0.2 μM I₂/Au-Pd-ITO dye-sensitized solar cell.     

In reply to “A query on the Mg2p of MgO”

Research on Chemical Intermediates -     

Enhanced physical and chemical adsorption of carbon dioxide using bimetallic copper–magnesium oxide/carbon nanocomposite

Mixed Cu and Mg oxides on nitrogen-rich activated carbon (AC) from Nypha fruticans biomass were characterized and their CO₂ adsorption performance was measured. Highly dispersed CuO and MgO nanoparticles on AC was obtained using an ultrasonic-assisted impregnation method. The optimum adsorbent is 5%CuO–25%MgO/AC having good surface properties of high surface area, pores volume and low particles agglomeration. The higher content of MgO of 5%CuO–25%MgO/AC adsorbent contributes to less metal carbide formation which increases their porosity, surface area and surface basicity. XPS analysis showed some amount of nitrogen content on the surface of the adsorbent which increased their surface basicity towards selective CO₂ adsorption. The presence of moisture accelerated the CO₂ chemisorption to form a hydroxyl layer on the surfaces. The 5%CuO–25%MgO/AC adsorbent successfully adsorbed CO₂ via physisorption and chemisorption of 14.8 and 36.2 wt%, respectively. It was significantly higher than fresh AC with better selectivity to CO₂.     

Lectin-based electrophoretic analysis of the expression of the 35 kDa inter-alpha-trypsin inhibitor heavy chain H4 fragment in sera of patients with five different malignancies

A 35 kDa glycoprotein whose abundance was previously demonstrated to be enhanced in sera of patients with endometrial adenocarcinoma (n = 12), was isolated from pooled sera of three of the cancer patients using champedak galactose-binding lectin affinity chromatography in the present study. Subjecting it to 2-DE and MS/MS, the glycoprotein was identified as the O-glycosylated fragment of inter-alpha-trypsin inhibitor heavy chain H4 (ITIH4). When compared to control sera (n = 17), expression of the 35 kDa ITIH4 cleavage fragment was demonstrated to be significantly enhanced in sera of patients with breast carcinoma (n = 10), epithelial ovarian carcinoma (n = 10), and germ cell ovarian carcinoma (n = 10) but not in patients with nasopharyngeal carcinoma (n = 13) and osteosarcoma (n = 7). The lectin-based electrophoretic bioanalytical method adopted in the present study may be used to assess the physiological relevance of ITIH4 fragmentation and its correlation with different malignancies, their stages and progression.     

Synthesis of libraries of thiazole, oxazole and imidazole-based cyclic peptides from azole-based amino acids. A new synthetic approach to bistratamides and didmolamides

Treatment of a 1 : 1 mixture of the thiazole-based amino acids 8a and 8b with FDPP-i-Pr(2)NEt in CH(3)CN gave a mixture of the cyclic trimers 14, 15, 16 and 17 and the cyclic tetramers 19 and 23 in the ratio 2 : 7 : 5 : 8 : 1 : 1 and in a combined yield of 70%. Separate coupling reactions between the bisimidazole amino acid 45 and the thiazole/oxazole amino acids 43a and 42a in the presence of FDPP-i-Pr(2)NEt led to the bisimidazole based cyclic trimers 55 and 57 respectively (54-57%) and to the cyclic tetramer 56 (8-11%). Similar coupling reactions involving the bisthiazole and bisoxazole amino acids 49 and 47 with the imidazole/oxazole/thiazole amino acids 41a, 42a and 43a gave rise to the library of oxazole, thiazole and imidazole-based cyclic peptides 58, 59, 60, 61, 62, 63, 64 and 65. A coupling reaction between the bisthiazole amino acid 49 and the oxazole amino acid 73 led to an efficient (36% overall) synthesis of bistratamide H (67) found in the ascidian Lissoclinum bistratum. Coupling reactions involving oxazolines with thiazole amino acids were less successful. Thus, a coupling reaction between the phenylalanine-based oxazoline amino acid 71a and either the thiazole amino acid 8a or the bisthiazole amino acid 74 gave only a 2% yield of the cyclic hexapeptide didmolamide A (4) found in the ascidian Didemnum molle. Didmolamide B (68) was obtained in 9% yield from a coupling reaction between 74 and the phenylalanine threonine amino acid 72, using either FDPP or DPPA.     

Lyophilised Platelet-Rich Fibrin: Physical and Biological Characterisation

Background: Platelet-rich fibrin (PRF) has gained popularity in craniofacial surgery, as it provides an excellent reservoir of autologous growth factors (GFs) that are essential for bone regeneration. However, the low elastic modulus, short-term clinical application, poor storage potential and limitations in emergency therapy use restrict its more widespread clinical application. This study fabricates lyophilised PRF (Ly-PRF), evaluates its physical and biological properties, and explores its application for craniofacial tissue engineering purposes. Material and methods: A lyophilisation method was applied, and the outcome was evaluated and compared with traditionally prepared PRF. We investigated how lyophilisation affected PRF’s physical characteristics and biological properties by determining: (1) the physical and morphological architecture of Ly-PRF using SEM, and (2) the kinetic release of PDGF-AB using ELISA. Results: Ly-PRF exhibited a dense and homogeneous interconnected 3D fibrin network. Moreover, clusters of morphologically consistent cells of platelets and leukocytes were apparent within Ly-PRF, along with evidence of PDGF-AB release in accordance with previously reports. Conclusions: The protocol established in this study for Ly-PRF preparation demonstrated versatility, and provides a biomaterial with growth factor release for potential use as a craniofacial bioscaffold.     

The radiation shielding offered by the commercial glass installed in Bangladeshi dwellings

One sign of a vibrant Bangladeshi economy has been the move away from the use of more traditional housing materials towards a preference for modern constructional media. Glass, one such example, used both decoratively and in a structural context, offers various advantageous properties and facets including a protective feature against radiation that has not previously been considered. Current interest examines the dosimetric possibilities offered by the commercial glass as a secondary shield and also in retrospective ionising radiation exposure analysis. Four popular brands of window glass are investigated, all available within the local market (PHP-Bangladesh, Usmania-Bangladesh, Nasir-Bangladesh and Rider-China), all with the same thickness and colour, varying in terms of elemental weight fractions as evaluated by energy dispersive X-ray analysis. As potential attenuators of transmitted radiation thereby forming secondary barriers against radiation exposure from penetrating radiations, the four brands of glass have been studied using photon energies from 59 up to 1332 keV, a range of values representative of that potentially encountered in incidents. Use has been made of a well-shielded high-purity germanium γ-ray spectrometer and associated electronics, providing for evaluation of the characteristic barrier parameters of half-value layer, radiation protection efficiency and effective atomic number (Z_eff). Of the four brands investigated, Rider provides superior secondary shielding performance. Concerning potential retrospective dosimetry the effective atomic number of the glass samples are comparable with that of the commercial thermoluminescence (TL) dosimeter TLD-200. At high doses, the TL yields are sufficient to provide for retrospective accident dosimetry.     

Electrical field analysis of metal‐surface plasmon resonance using a biaxially strained Si substrate

Electrical field components of metal‐surface plasmon resonance were analyzed in detail. Both longitudinal optical (LO) and transverse optical (TO) phonon modes of a biaxially strained Si layer can be excited by surface‐enhanced Raman spectroscopy (SERS). The z to y polarization ratio in SERS measurements was calculated to be 0.78 using the intensity ratio of TO to LO phonon modes. The electrical field components of SERS were also calculated by the finite‐difference time‐domain method. Copyright © 2014 John Wiley & Sons, Ltd.     

Growth of Fe-doped ZnO nanorods using aerosol-assisted chemical vapour deposition via in situ doping

In situ Fe doping of ZnO nanorods (NRs) was performed using aerosol assisted chemical vapour deposition (AA-CVD) technique. As the aerosol generator is located outside the reactor, AA-CVD provides the flexibility to control doping parameters, such as doping timing, doping duration and a wider choice of dopant precursors. The Fe dopant aerosol was flowed into the reactor during the growth of ZnO NRs to achieve in situ doping. The X-ray diffraction analysis indicates that the Fe dopants were introduced into the ZnO lattice and present mainly in the form of Fe²⁺. This result is supported by the X-ray photoelectron spectroscopy analysis as the doublet separation is 13.6 eV, although there is a shift of Fe_1/2 and Fe_3/2 peaks to a lower binding energy levels. A strong green emission of PL of Fe-doped ZnO NRs shows that the NRs have poor crystal quality attributed to the Fe-induced defects (recombination centres). The poor photocatalytic performance in degrading Rhodamine B solution of Fe-doped ZnO NRs further proves that the Fe-induced defects were recombination centres rather than traps. Lastly, the growth mechanism of in situ Fe doping of ZnO NRs was discussed.