垂直各向异性Ho3Fe5O12薄膜的外延生长与其异质结构的自旋输运

垂直磁各向异性稀土-铁-石榴石纳米薄膜在自旋电子学中具有重要应用前景.本文使用溅射方法在(111)取向掺杂钇钪的钆镓石榴石(Gd_0.63Y_2.37Sc₂Ga₃O₁₂,GYSGG)单晶衬底上外延生长了2—100 nm厚的钬铁石榴石(Ho₃Fe₅O₁₂,HoIG)薄膜,并进一步在HoIG上沉积了3 nm Pt薄膜.测量了室温下HoIG的磁各向异性和HoIG/Pt异质结构的自旋相关输运性质.结果显示,厚度薄至2 nm的HoIG薄膜(小于2个单胞层)在室温仍具有铁磁性,且由于外延应变,2—60 nm厚HoIG薄膜都具有很强的垂直磁各向异性,有效垂直各向异性场最大达350 mT;异质结构样品表现出非常可观的反常霍尔效应和“自旋霍尔/各向异性”磁电阻效应,前者在HoIG厚度小于4 nm时开始缓慢下降,而后者当HoIG厚度小于7 nm时急剧减小,说明相较于反常霍尔效应,磁电阻效应对HoIG的体磁性相对更加敏感;此外,自旋相关热电压随HoIG厚度减薄在整个厚度范围以指数方式下降,说明遵从热激化磁振子运动规律的自旋塞贝克效应是其主要贡献者.本文结果表明HoIG纳米薄膜具有可调控的垂直磁各向异性,厚度大于4 nm的HoIG/Pt异质结构具有高效的自旋界面交换作用,是自旋电子学应用发展的一个重要候选材料.     

α-decay study of 218Ac and 221Th in 40Ar+186W reaction

In this study,²¹⁸Ac and ²²¹Th nuclides were produced via the heavy-ion induced fusion evaporation reaction ⁴⁰Ar+¹⁸⁶W.Their decay properties were studied with the help of the gas-filled recoil spectrometer SHANS and a digital data acquisition system.The cross section ratio between ²²²Pa and ²¹⁸Ac was extracted experimentally,withmeasured value 0.69(9).Two new possible α decay branches to ²²¹Th are suggested.The valence neutron configurations for the daughter ²¹⁷Ra are discussed in terms of the hindrance factors.     

Multi-Focus Image Fusion Method Based on Multi-Scale Decomposition of Information Complementary

Multi-focus image fusion is an important method used to combine the focused parts from source multi-focus images into a single full-focus image. Currently, to address the problem of multi-focus image fusion, the key is on how to accurately detect the focus regions, especially when the source images captured by cameras produce anisotropic blur and unregistration. This paper proposes a new multi-focus image fusion method based on the multi-scale decomposition of complementary information. Firstly, this method uses two groups of large-scale and small-scale decomposition schemes that are structurally complementary, to perform two-scale double-layer singular value decomposition of the image separately and obtain low-frequency and high-frequency components. Then, the low-frequency components are fused by a rule that integrates image local energy with edge energy. The high-frequency components are fused by the parameter-adaptive pulse-coupled neural network model (PA-PCNN), and according to the feature information contained in each decomposition layer of the high-frequency components, different detailed features are selected as the external stimulus input of the PA-PCNN. Finally, according to the two-scale decomposition of the source image that is structure complementary, and the fusion of high and low frequency components, two initial decision maps with complementary information are obtained. By refining the initial decision graph, the final fusion decision map is obtained to complete the image fusion. In addition, the proposed method is compared with 10 state-of-the-art approaches to verify its effectiveness. The experimental results show that the proposed method can more accurately distinguish the focused and non-focused areas in the case of image pre-registration and unregistration, and the subjective and objective evaluation indicators are slightly better than those of the existing methods.     

金属有机物化学气相沉积法生长Ga2（1-x）In2xO3薄膜的结构及光电性能研究

采用金属有机物化学气相沉积（MOCVD）法在蓝宝石（0001）衬底上制备出了Ga_2（1-x）In_2xO₃（x=01—09）薄膜,研究了薄膜的结构、电学和光学特性以及退火处理对薄膜性质的影响.测量结果表明：当In组分x=02时,样品为单斜β-Ga₂O₃结构;x=05的样品,薄膜呈现非晶结构,退火处理后薄膜结构得到明显的改善 关键词： 金属有机物化学气相沉积 2（1-x）In_2xO₃薄膜')" href="#">Ga_2（1-x）In_2xO₃薄膜 蓝宝石衬底 退火     

ZnMgO/ZnO异质结构中二维电子气的研究

论文根据ZnMgO/ZnO异质结构二维电子气的能带结构及相关理论模型, 采用一维Poisson-Schrodinger方程的自洽求解, 模拟计算了ZnMgO/ZnO异质结构中二维电子气的分布及其对ZnMgO势垒层厚度及Mg组分的依赖关系. 研究发现该异质结构中ZnMgO势垒层厚度存在一最小临界值: 当垒层厚度小于该临界值时, 二维电子气消失, 当垒层厚度大于该临界值时, 其二维电子气密度随着该垒层厚度的增加而增大; 同时研究发现ZnMgO势垒层中Mg组分的增加将显著增强其二维电子气的行为, 导致二维电子气密度的明显增大; 论文对模拟计算获得的结果与相关文献报道的实验结果进行了比较, 并从极化效应和能带结构的角度进行了分析和讨论, 给出了合理的解释. 关键词： 氧化锌 二维电子气 异质结构 理论计算     

Scholte波与含泥沙两相流介质属性关系的分析及仿真验证

基于四种超声悬浮液模型Urick, Urick-Ament, HT, Mcclements分析了Scholte波在两相流体与多孔介质固体界面处的传播特性. 结合各模型的复波数表达式建立含泥沙流体-多孔介质固体界面波特征方程, 分析了Scholte波速与两相流体积含量、粒径等介质属性的关系. 通过仿真实验获得界面波信号, 运用时延估计获得Scholte波速与泥沙含量、粒径的关系, 发现所得的波速与Urick-Ament和HT理论有相对好的一致性. 关键词： Scholte波 两相流体 多孔介质 泥沙含量     

磁控溅射制备W掺杂VO2/FTO复合薄膜及其性能分析

为了获得相变温度低且热致变色性能优越的光学材料, 室温下在F:SnO₂ (FTO)导电玻璃基板表面沉积钨钒金属膜, 再经空气气氛下的热氧化处理, 制备了W掺杂VO₂/FTO复合薄膜, 利用X射线光电子能谱、X射线衍射和扫描电镜对薄膜的结构和表面形貌进行了分析. 结果表明: 高温热氧化处理过程中没有生成W, F, V混合氧化物, W以替换V原子的方式掺杂. 与采用相同工艺和条件制备的纯VO₂/FTO复合薄膜相比, W掺杂VO₂薄膜没有改变晶面取向, 仍具有(110)晶面择优取向, 相变温度下降到35 ℃左右, 热滞回线收窄到4 ℃, 高低温下的近红外光透过率变化量提高到28%. 薄膜的结晶程度明显提高, 表面变得平滑致密, 具有很好的一致性, 对光电薄膜器件的设计开发和工业化生产具有重要意义. 关键词： W掺杂 2')" href="#">VO₂ FTO导电玻璃 磁控溅射     

Theory studies of the local lattice distortions and the EPR parameters for Cu2+, Mn2+ and Fe3+ centres in ZnWO4

The local lattice distortions and the electron paramagnetic resonance (EPR) parameters (g factors, hyperfine structure constants and zero-field splittings) for Cu²⁺, Mn²⁺ and Fe³⁺ in ZnWO₄ are theoretically studied based on the perturbation calculations for rhombically elongated octahedral 3d⁹ and 3d⁵ complexes. The impurity centres on Zn²⁺ sites undergo the local elongations of 0.01, 0.002 and 0.013 Å along the C₂ axis and the planar bond angle variations of 8.1°, 8.0° and 8.6° for Cu²⁺, Mn²⁺ and Fe³⁺, respectively, due to the Jahn–Teller effect and size and charge mismatch. In contrast to the host Zn²⁺ site with obvious axial elongation (～0.31 Å) and perpendicular (angular) rhombic distortion, all the impurity centres demonstrate more regular octahedral due to the above local lattice distortions. The copper centre exhibits significant Jahn–Teller reductions for the spin-orbit coupling and orbital angular momentum interactions, characterised by the Jahn–Teller reduction factor J (≈0.29 ? 1). The calculated EPR parameters agree well with the experimental results. The local structures of the impurity centres are analysed in view of the corresponding lattice distortions.     

Effect of Non‐Ideal Mixed Solvents on Dimensions of Poly(N‐Vinylpyrrolidone) and Poly(Methyl Methacrylate) Coils

An addition of a small amount of non‐solvent tetrahydrofuran (THF) to good solvent water gave rise to a strong solvent power for poly(N‐vinylpyrrolidone) (PVP). It was found that PVP coils in mixtures of water and THF first swelled as the fraction of THF was increased, and then the coils contracted after a critical composition of the solvent mixture based on the measurement of dilute solution viscosities. It was reached that the power of the mixed solvents was not the simple average of the power of individual components. The influence of the non‐ideal mixing of water and THF on the power of these mixtures for PVP and the dimensions of PVP coils was taken into account. Especially the formation of pseudo‐clathrate hydrate structure with the composition φ _THF ≈ 0.44 was found to be an important factor to change the solvation and dimensions of PVP coils. Some other solvent mixtures for PVP and poly(methyl methacrylate) (PMMA) were also found to be non‐ideal mixtures. The viscosities of these solvent mixtures could show positive or negative deviation from the values obtained from the addition rule. It was shown again that the influence of the non‐ideality of these solvent mixtures on the dimensions of polymer coils was great. The action of mixed solvents changed the dimension of polymer coils, not only because of excluded volume effects but also because of the different molecular interactions present in these mixed solvents.     

Reactive Compatibilization of Poly(Butylene Terephthalate)/Acrylonitrile-Styrene-Acrylate Blends by Epoxy Resin: Morphology and Mechanical Properties

The effect on the notched Izod impact strength of poly(butylene terephthalate) (PBT) by blending it with acrylonitrile-styrene-acrylate (ASA) was examined. Epoxy resin (ER) was demonstrated to be an efficient compatibilizer for the partially compatible blends of PBT/ASA. It requires only a very small amount of ER to improve the toughness of the PBT/ASA blends drastically. Furthermore, there exists an optimum proportion of ER added to achieve maximum notched Izod impact strength. Transmission electron microscopy (TEM) observation suggests that the ER in the PBT/ASA/ER blends suppressing the tendency of coalescence of ASA, leading to better dispersion of the ASA particles. Field emission scanning electron microscopy (FESEM) shows that ER enhances the phase dispersion and the interfacial adhesion between the PBT and ASA phases, it improves the compatibility between PBT and ASA. The compositions in the interphase was continuous, which results in multiphase composites with a graded interphase. It is suggested that enhanced interphase adhesion was necessary to obtain improved dispersion, fine phase morphology, and better toughness.