The comparison between the Mie theory and the Rayleigh approximation to calculate the EM scattering by partially charged sand

The Mie theory and Rayleigh approximation are two basic methods to study the EM scattering of uncharged spherical particle, and when the particle radius is much smaller than the incident wavelength, they are equivalent, but whether the Rayleigh approximation is still equivalent to Mie theory when we use them to calculate the EM scattering of small charged particle, there is still no any report published to discuss this problem. In this paper we make some comparisons between Mie theory and Rayleigh approximation to solve the EM scattering of partially electrification spherical particles. The results showed that the Mie theory would be more suitable to calculate the scattering of charged spherical particles.     

Micro‐Raman study of exfoliated Bi2Sr2CaCu2O8+δ single crystals with different thicknesses

Exfoliated Bi₂Sr₂CaCu₂O_8+δ (Bi‐2212) single crystals were prepared by micromechanical cleavage of bulk Bi‐2212 single crystals on SiO₂/Si substrates. Room temperature micro‐Raman spectra were collected using a 532‐nm laser source. The evolutions of the spectra of A_1g (Bi), A_1g (Sr), and A_1g (O_Bi) Raman modes with different thicknesses of the samples were studied. The refractive index of Bi‐2212 single crystal was obtained by studying the intensity evolutions based on the interference effect. The observed wavenumber shifts of the A_1g (Bi), A_1g (Sr), and A_1g (O_Bi) modes were analyzed. Copyright © 2011 John Wiley & Sons, Ltd.     

Numerical simulations of the impact of wavefront phase distortions of pump on the beam quality of OPA

<正>A numerical model of optical parametric amplification(OPA) is introduced to investigate the impact of wavefront phase distortion of pump on the beam quality of signal.Numerical results show that the unidentical walk-off directions of the pump and the idler waves are the main factors leading to the transfer of wavefront phase distortions of the pump to the signal,and by reducing the angle between the two directions,the beam quality factor(M~2) can be greatly decreased and hence the good beam quality of the signal can be maintained.     

Size controlled synthesis of semiconductor nanocrystals in a continuous-flow mode microcapillary reactor

A microcapillary reactor with 320 μm inner diameter was utilized for CdSe nanoparticle synthesis. The influence of the reaction temperature and flow rate of precursors on the size and size distribution of prepared CdSe nanoparticles was systematically studied. The as-prepared nanoparticles exhibit sharp excitonic absorption and photoluminescence peak (FWHM 30 nm) with a quantum-yield around 10–40%. The microcapillary reactor was also used for CdSe/ZnS core-shell nanoparticle synthesis in continuous-flow mode. The quantum yield of the core-shell nanoparticles was found to be considerably influenced by the reactor temperature and have a close correlation with the thickness of ZnS shell under growth. An optimized quantum yield up to 70% was obtained for the CdSe/ZnS core-shell nanoparticles.     

Three-dimensional contrast-enhanced ultrasound of the liver: Experience of 92 cases

Three-dimensional contrast-enhanced ultrasound (3D-CEUS) is a combination of three-dimensional ultrasound (3DUS) and contrast-enhanced ultrasound (CEUS). To evaluate the feasibility of 3D-CEUS in liver imaging, investigate possible influencing factors to its image quality, and evaluate the influence of 3D-CEUS to clinical outcome, low acoustic power (mechanical index, 0.08-0.13) 3D-CEUS was carried out in 102 focal liver lesions in 92 patients by using the LOGIQ 9 ultrasound scanner and a volume transducer (frequency range, 2-5 MHz; focusing ability, 2-25 cm in depth; azimuth aperture 5.9 cm). The lesions were classified into two groups: group 1 (n = 51) for characterization and group 2 (n = 51) for local treatment response evaluation. The factors that influenced the image quality of 3D-CEUS were analyzed. The image quality and usefulness of 3D-CEUS between the two groups were compared by using the χ²-test. The results showed that the lesion diameter, location, and scanning route had no significant influence on the image quality in both groups, whereas interfering factors damaged the image quality in group 1. In group 1, during arterial phase, high image quality was more frequently found in hyperenhanced and hypo- or non-enhanced lesions compared with isoenhanced lesions. In group 2, interfering factor and local treatment response had no obvious influence on the image quality. The visualization rate of high image quality was 94.1% (48/51) in group 2 vs. 72.6% (37/51) in group 1 (P = 0.012). The investigators found that 3D-CEUS improved confidence but made no change in diagnosis in 19 (37.3%) of 51 lesions in group 1, whereas 41 (80.4%) of 51 lesions in group 2 (P = 0.000). 3D-CEUS tends to obtain better image quality and lead to higher diagnostic confidence in the lesions for local treatment response evaluation, and perhaps is more useful in this aspect in future clinical settings.     

Influence of Zr and Ce doping on electromagnetic properties of (Gd,Y)–Ba–Cu–O superconducting tapes fabricated by metal organic chemical vapor deposition

(Gd,Y)Ba₂Cu₃O_x tapes have been fabricated by metal organic chemical vapor deposition (MOCVD) with Zr-doping levels of 0–15 mol.% and Ce doping levels of 0–10 mol.% in 0.4 μm thick films. The critical current density (J_c) of Zr-doped samples at 77 K, 1 T applied in the orientation of H 6 c is found to increase with Zr content and shows a maximum at 7.5% Zr doping. The 7.5% Zr-doped sample exhibits a critical current density (J_c) of 0.95 MA/cm² at H 6 c which is more than 70% higher than the J_c of the undoped sample. The peak in J_c at H 6 c is 83% of that at H 6 a–b in the 7.5% Zr-doped sample which is more than twice as that in the undoped sample. Superconducting transition temperature (T_c) values as high as about 89 K have been achieved in samples even with 15% Zr and 10% Ce. Ce-doped samples with and without Ba compensation are found to exhibit substantially different J_c values as well as angular dependence characteristics.     

Geometric Phase in a Two Energy Level <Emphasis Type="Italic">k</Emphasis>-Photon Jaynes-Cummings Model with Imaginary Photon Process

By using the Lewis-Riesenfeld invariant theory, we have studied the dynamical phase and the geometric phase in a two energy level k-photon Jaynes-Cummings model with imaginary photon process. We find that the geometric phase in a cycle case is independent of the frequency of the photon field, the coupling coefficient between photons and atoms, and the atom transition frequency. We predict the physical effect of the geometric phase in the imaginary photon process may be measured.     

Experimental study of the time-resolved reflectivity of chromium film

The transient time-resolved reflectivity of chromium film is studied by femtosecond pump-probe technique with a 70-fs laser. Experimental results show that the reflectivity change increases with the power of the pump laser. The fast decrease of the reflectivity occurs between 0-200 fs which is mainly due to the electron-electron interaction. Subsequencely, the slower recovery of the reflectivity between 200-900 fs is mainly due to the electron-phonon coupling process. The reflectivity after 900 fs rises little to a near-constant value for the thermal equilibrium of the system. The experimental results can be explained properly with numerical simulation of the two-temperature model. It is helpful for understanding of the electron ultrafast dynamics in chromium film.     

有机半导体的物理掺杂理论

基于最低未被占据分子轨道（LUMO）和最高被占据分子轨道（HOMO）的高斯态密度分布与载流子在允许量子态中的费米-狄拉克（Fermi-Dirac）分布,提出有机半导体中物理掺杂的理论模型;研究了掺杂浓度、温度和禁带宽度对载流子浓度的影响,并与一些报道的实验结果做了比较.研究发现无论是否掺杂,温度升高时,有机半导体中的载流子浓度都会增大,并且随温度倒数的线性减小而指数增大;对于本征有机半导体,载流子浓度随禁带宽度的增大而指数下降,随高斯分布宽度的平方指数增加;对杂质和主体不同能级关系的掺杂情形下掺杂浓度对载 关键词： 有机半导体 掺杂 高斯态密度 载流子浓度     

A stable BaCeO3-based proton conductor for solid oxide fuel cells

In order to improve the chemical stability of BaCeO₃, Ti⁴⁺ was introduced into B site of BaCeO₃ to modify the chemical stability. XRD test demonstrates that \textBaC\texte_0.6\textT\texti_0.2\textY_0.2\textO_{3 - d} {\text{BaC}}{{\text{e}}_{0.6}}{\text{T}}{{\text{i}}_{0.2}}{{\text{Y}}_{0.2}}{{\text{O}}_{3 - \delta }} (BCTY) keeps its original pervoskite-type structure at a high doping level of 20%. After exposure in 94% N₂ + 3% CO₂ + 3% H₂O at 700 °C for 10 h, BCTY exhibited adequate chemical stability while decomposition was found in \textBaC\texte_0.8\textY_0.2\textO_{3 - d} {\text{BaC}}{{\text{e}}_{0.8}}{{\text{Y}}_{0.2}}{{\text{O}}_{3 - \delta }} (BCY). Accordingly, the conductivity of BCTY reaches 0.0072 S/cm at 700 °C in humidified hydrogen which is a little lower than BCY (0.0085). Besides, BCTY displayed better sintering characteristics than BCY at high temperatures and the relative density reaches 96.4% and 94.8%, respectively. The two samples also exhibited similar thermal expansion behavior from 30 to 1,000 °C. A fuel cell with BCTY as electrolyte exhibited 244 mW/cm² at 700 °C and the stable short-term performance further proved the stability of BCTY.