Capture efficiency of Escherichia coli in fimbriae-mediated immunoimmobilization

Capturing pathogens on a sensor surface is one of the most important steps in the design of a biosensor. The efficiency of a biosensor at capturing pathogens has direct bearing on its sensitivity. In this work we investigated the capturing of Escherichia coli on substrates modified with antibodies targeting different types of fimbriae: K88ab (F4), K88ac (F4), K99 (F5), 987P (F6), F41, and CFA/I. The results suggest that all these fimbriae can be used for the efficient immobilization of living E. coli cells. The immobilization efficiency was affected by the purity and clone type of the antibody and the fimbriae expression level of the bacteria. For a specific fimbriae type, a higher immobilization efficiency was often observed with the monoclonal antibodies. Immunoimmobilization was utilized in an antibody microarray immersed in a mixed culture of pathogens to demonstrate the rapid and simultaneous label-free detection of multiple pathogens within less than 1 h using a single test. The capture rate of living pathogens exceeds a single bacterium per 100 × 100 μm(2) area per 0.5 h of incubation for a bulk concentration of 10(5) cfu/mL.     

Enantioselective iodolactonization catalyzed by chiral quaternary ammonium salts derived from cinchonidine

Chiral quaternary ammonium salts derived from cinchonidine have been applied to catalyze the stereoselective iodolactonizations of trans-5-aryl-4-pentenoic acids leading to a mixture of two regioselectively iodolactonized products with fair to excellent yield (37-98%) and moderate enantioselectivity (exo = 42.0% ee, endo = 31.0% ee) under mild conditions. This work is the first example of asymmetric iodolactonization reaction in the presence of less than a stoichiometric amount of chiral reagent.     

Catalytic Combustion of Methane over Ti-Pillared Clay Supported Copper Catalysts

A natural montmorillonite, produced from Laiyang of Shandong Province, was pillared by Tipolycations to form Ti-pillared clay (Ti-PILC), and characterized by BET surface area, infrared spectra and thermal analysis. The characterization results show that Ti-PILC has a larger surface area and more hydroxyl groups than that of the natural clay, thus was used as the catalytic carriers to prepare supported Cu catalysts (Cu/TiopILC). The 20%Cu/Ti-PILC with 10mmol/g of Ti/clay shows a high catalytic performance of methane combustion in the temperature range of 400-500℃.     

Analysis of Five Pharmacologically Active Compounds from Rhodiola for Natural Product Drug Discovery with Capillary Electrophoresis

A rapid capillary electrophoresis method for the separation of five natural pharmacologically active compounds from extracted Rhodiola, namely salidroside, tyrosol, rhodionin, gallic acid and ethyl gallate has been developed. The separation of five natural pharmacologically active compounds was carried out in a fused-silica capillary with 14 mM boric acid, 30 mM SDS and 2.5% acetonitrile, adjusted to pH 10.7 with NaOH. Applied potential was 21kV. The temperature of the capillary was maintained at 25 °C by the instrument thermostating system, with the correlation coefficients of 0.9805–0.9989 for migration time, and relative standards of < 3.52% for peak areas. The established method is rapid and reproducible for the separation of five natural pharmacologically compounds from extracts of Rhodiola with satisfactory results.     

Magnetic solid-phase extraction using magnetic hypercrosslinked polymer for rapid determination of illegal drugs in urine

A novel magnetic material Fe₃O₄/SiO₂/P(MAA‐co‐VBC‐co‐DVB) was prepared via the hypercrosslinking of its precursor which was produced via precipitation polymerization of methacrylic acid (MAA), vinylbenzyl chloride (VBC), and divinylbenzene (DVB) in the presence of Fe₃O₄/SiO₂ submicrospheres with the surface containing abundant reactive double bonds. The resultant sorbent was characterized by scan electron microscopy, N₂ adsorption, and Fourier transform infrared spectroscopy. It was found that this material had remarkable features such as large surface area (500 m²/g) and pore volume (0.32 cm³/g), as well as desirable chemical composition (including hydrophobic and ion‐exchange moieties). Taking advantages of the Fe₃O₄/SiO₂/P(MAA‐co‐VBC‐co‐DVB), a magnetic SPE (MSPE) coupled with capillary electrophoresis (CE) method was developed for the determination of illegal drugs in urine samples. The extraction time could be clearly shortened up to 3 min. The recoveries of these drug compounds were in the range of 84.0–123% with relative standard deviations ranging between 1.7 and 10.5%; the limit of detection was in the range of 4.0–6.0 μg/L. The proposed method is simple, effective, and low‐cost, and provides an accurate and sensitive detection platform for abused drug analysis.     

2-(5-Benzoacridine)ethyl-p-toluenesulfonate as sensitive reagent for the determination of bile acids by HPLC with fluorescence detection and online atmospheric chemical ionization-mass spectrometric identification

2-(5-Benzoacridine)ethyl-p-toluenesulfonate (BAETS), a dual-sensitive probe, was reacted with bile acids in the presence of K₂CO₃ catalyst in dimethyl sulfoxide (DMSO) solvent to give BAETS–bile acid derivatives. Derivatives exhibited intense fluorescence (FL) with an excitation maximum at λ _ex 270 nm and an emission maximum at λ _em 510 nm. MS analysis using APCI-MS indicated that derivatives had excellent APCI-MS ionizability with percentage ionization δ values changing from 0 to 88.83% in aqueous acetonitrile and from 0 to 89.15% in aqueous methanol. The collision induced dissociation spectra of m/z [M + H]⁺ contained specific fragment ions at m/z [M + H−H₂O]⁺, [M + H−2H₂O]⁺, [M + H−3H₂O]⁺, 347.3, and 290.1. Repeatability was good for LC separation of BAETS–bile acid derivatives with aqueous acetonitrile as mobile phase. The relative standard deviations (RSDs) of retention time and peak area at 6.6 nmol mL⁻¹ levels with fluorescence detection (FL) were from 0.045 to 0.072% and from 2.16 to 2.73%, respectively. Excellent linear responses were observed, with regression coefficients >0.9995. The FL detection limits (S/N = 3) were in the range of 18.0–36.1 fmol. The online APCI-MS detection limits are in the range of 500–790 fmol (at a signal-to-noise ratio of 3).     

Effects of preparation conditions of Au/FeO_x /Al_2O_3 catalysts prepared by a modified two-step method on the stability for CO oxidation

Composite oxide FeO x /Al 2 O 3 -supported gold catalysts were prepared by a modified two-step method. The effects of preparation conditions on the initial catalytic activity and long-time stability were studied for CO oxidation. XRD, XPS and in situ FTIR were employed to investigate the state of FeO x and the species on the catalyst surface. The results showed that Au/FeO x /Al 2 O 3 catalysts prepared by this method exhibited high activity and high stability in a wide pH value range. Calcination pretreatm...     

Theoretical study of electronic structure of rhodium mononitride and interpretation of experimental spectra

Potential energy curves of 22 electronic states of RhN have been calculated by the complete active space second‐order perturbation theory method. The X¹Σ₀⁺ is assigned as the ground state, and the first excited state a³Π₀+ is 978 cm^?1 higher. The ¹Δ(I) and B¹Σ⁺ states are located at 9521 and 13,046 cm^?1 above the ground state, respectively. The B¹Σ⁺ state should be the excited state located 12,300 cm^?1 above the ground state in the experimental study. Moreover, two excited states, C¹Π and b³Σ⁺, are found 14,963 and 15,082 cm^?1 above the X¹Σ⁺ state, respectively. The transition C¹Π₁–X¹Σ₀⁺ may contribute to the experimentally observed bands headed at 15,071 cm^?1. There are two excited states, D¹Δ and E¹Σ⁺, situate at 20,715 and 23,145 cm^?1 above the X¹Σ⁺ state. The visible bands near 20,000 cm^?1 could be generated by the electronic transitions D¹Δ₂–a³Π₁ and E¹Σ⁺₀–X¹Σ⁺₀ because of the spin–orbit coupling effect. © 2013 Wiley Periodicals, Inc.     

硫化铟锌的改性合成及光催化特性

随着社会经济的高速发展,能源的短缺和生态的破坏引起了人们的关注。近年来,寻找合适的解决方案已成为关注的重点。作为一种绿色环保技术,光催化由于其高效、低成本等优点而成为能源和环境问题的研究热点。在许多光催化材料中,三元硫化物硫化铟锌(ZnIn₂S₄)由于具有可见光响应特性、简单的制备方法和出色的稳定性而表现出巨大的潜力。然而,较高的载流子复合率限制了其光催化性能。近年来,许多研究报道了改性ZnIn₂S₄以提高其光催化性能,在此,本文详细介绍了各种改性研究,包括ZnIn₂S₄单体的合成、半导体化合物的结构、贵金属沉积、碳元素改性、离子掺杂。然后,系统完整地总结了ZnIn₂S₄在光催化、降解有机污染物、去除六价铬、还原CO₂和有机合成等方面表现出的光催化特性和机理。最后,对ZnIn₂S₄的发展前景提出了展望,以期ZnIn₂S₄光催化剂得到更广泛和深入的研究,尽快在实际生产中得到应用。     

FeZSM-5/N2O催化氧化苯制苯酚

苯一步氧化制苯酚,是有机物氧化合成中富有挑战性的研究课题之一。该文着重论述了在FeZSM-5及其一系列沸石催化剂上,应用氧化亚氮作为氧化剂使苯直接氧化制苯酚的研究进展。这一系列催化剂体系的特殊之处在于通过氧化亚氮在沸石分子筛上的分解获得具有催化活性的a－氧。详细讨论了在沸石分子筛上形成特殊结构的铁氧化物作为催化活性中心这一观点。由于这种催化体系对苯直接氧化制苯酚的反应有着很高的选择性,因此,这种比较经济和安全的制备苯酚的方法引起了人们的广泛关注。