Gold-catalyzed direct amination of arenes with azodicarboxylates

Gold(III) chloride catalyzed direct amination of arenes with azodicarboxylates was developed. The new catalytic system was active to a broad range of substrates, and the reaction was carried out under mild conditions. It represents the first catalytic system for the direct amination of electron-deficient arenes with azodicarboxylates to the best of our knowledge. This reaction provides an important approach for the synthesis of heterocyclic compounds in pharmaceutical and chemical industries.     

Electrochemical characterization of plasticized polymer electrolytes based on ABS/PMMA blends

Electrochemical characteristics of plasticized polymer electrolytes based on poly(acrylonitrile-butadene-styrene) and poly(methyl methacrylate) (abbreviated as ABS/PMMA) blends have been studied. The ionic conductivity of the polymer electrolyte with an ABS/PMMA ratio of 6/4 and a plasticizer content of 60% was highest when the LiClO₄ content was 4.8%. The transference numbers (T ₊) of the polymer electrolytes were measured using the steady-state current method, and the T ₊ values were found to be less than 0.5. The electrolyte system was found to have an electrochemical stability window up to 4.5 V. The properties of the electrode interface in contact with the polymer electrolyte were also investigated by impedance spectroscopy, and the evolution of these spectra as a function of storage time was explained and interpreted using a solid-polymer layer (SPL) model. The time evolution of the impedance parameters indicated that a passivation film grew rapidly on the lithium surface immediately after assembly of the cell. Electronic Publication     

Aldol condensation of amides using phosphazene-based catalysis

We have developed a new method for the direct aldol condensation of unactivated amides using 1,3,5-triazo-2,4,6-triphosphorine-2,2,4,4,6,6-hexachloride (TAPC)-based phosphorous/SO₄²⁻ catalysis. The SO₄²⁻ species in a reaction mixture enhances the reaction rate of the catalysis. In principle, no metal sources are required for the generation of the catalyst, and there is no requirement for the use of stoichiometric quantities of an acid or base. This catalyst system is operative under relatively acidic conditions. One major advantage of carrying out the reaction under acidic conditions is that both aldehydes and acetals are capable of undergoing carbon-carbon bond formation at the α-carbon of amide carbonyl groups through dehydration.     

Line-addressable digital-deflection programmable micromirror array

We report a novel digital-deflection programmable micromirror array driven by micromechanical digital-to-analog converters that eliminates the need for electrical digital-to-analog converters for analog displacement control, thus simplifying the driving circuitry and reducing the overall system cost. Furthermore, owing to the bistable and hysteretic characteristics of parallel-plate electrostatic actuators, an array of micromirrors can be controlled by means of row- and column-addressing lines, which drastically reduce the number of routing wires and allow array sizes to increase while they maintain high array quality.     

Design,synthesis and therapeutic potential of 3-(2-(1<Emphasis Type="Italic">H</Emphasis>-benzo[<Emphasis Type="Italic">d</Emphasis>]imidazol-2-ylthio)acetamido)-<Emphasis Type="Italic">N</Emphasis>-(substituted phenyl)benzamide analogues

Background

The emergence of bacterial resistance is a major public health problem. It is essential to develop and synthesize new therapeutic agents with better activity. The mode of actions of certain newly developed antimicrobial agents, however, exhibited very limited effect in treating life threatening systemic infections. Therefore, the advancement of multi-potent and efficient antimicrobial agents is crucial to overcome the increased multi-drug resistance of bacteria and fungi. Cancer, which remains as one of the primary causes of deaths and is commonly treated by chemotherapeutic agents, is also in need of novel and efficacious agents to treat resistant cases. As such, a sequence of novel substituted benzamides was designed, synthesized and evaluated for their antimicrobial and anticancer activities.

Methodology

All synthesized compounds were characterized by IR, NMR, Mass and elemental analysis followed by in vitro antimicrobial studies against Gram-positive (Staphylococcus aureus), Gram-negative (Salmonella typhi and Klebsiella pneumoniae) bacterial and fungal (Candida albicans and Aspergillus niger) strains by the tube dilution method. The in vitro anticancer evaluation was carried out against the human colorectal carcinoma cell line (HCT116), using the Sulforhodamine B assay.

Results, discussion and conclusion

Compound W6 (MIC_{sa, st, kp}?=?5.19 µM) emerged as a significant antibacterial agent against all tested bacterial strains i.e. Gram-positive (S. aureus), Gram-negative (S. typhi, K. pneumoniae) while compound W1 (MIC_{ca, an}?=?5.08 µM) was most potent against fungal strains (A. niger and C. albicans) and comparable to fluconazole (MIC?=?8.16 µM). The anticancer screening demonstrated that compound W17 (IC₅₀?=?4.12 µM) was most potent amongst the synthesized  compounds and also more potent than the standard drug 5-FU (IC₅₀?=?7.69 µM).

Open image in new window

     

In vitro assessment of pediococci- and lactobacilli-induced cholesterol-lowering effect using digitally enhanced high-performance thin-layer chromatography and confocal microscopy

The cholesterol-lowering properties of 12 lactic acid bacteria (LAB) in the absence or presence of 0.3% bile salts were assessed and compared quantitatively and qualitatively in vitro. A new, more sensitive and cost-effective high-performance thin-layer chromatography method combined with digital image evaluation of derivatised chromatographic plates was developed and validated to quantify cholesterol in LAB culture media. The performance of the method was compared with that of the o-phthalaldehyde method. For qualitative assessment, assimilated fluorescently tagged cholesterol was visualised by confocal microscopy. All LAB strains exhibited a cholesterol-lowering effect of various degrees (19–59% in the absence and 14–69% in the presence of bile salts). Lactobacillus plantarum LAB12 and Pentosaceus pentosaceus LAB6 were the two best strains of lactobacilli and pediococci. They lowered cholesterol levels by 59% and 54%, respectively, in the absence and by 69% and 58%, respectively, in the presence of bile salts. Confocal microscopy showed that cholesterol was localised at the outermost cell membranes of LAB12 and LAB6. The present findings warrant in-depth in vivo study.

(A) 3D plots based on scan at 525 nm of (B) derivatized HPTLC plate of separated cholesterol and (C) confocal microscopic image showing the localisation of NBD-cholesterol assimilated by LAB

     

Influence of current collecting and functional layer thickness on the performance stability of La0.6Sr0.4Co0.2Fe0.8O3-δ-Ce0.8Sm0.2O1.9 composite cathode

Journal of Solid State Electrochemistry - The effect of current collecting layer (CCL) and cathode functional layer (CFL) thicknesses on the catalytic activity of the...     

Design and operation of magnetophoretic systems at microscale: Device and particle approaches

Combining both device and particle designs are the essential concepts to be considered in magnetophoretic system development. Researcher efforts are often dedicated to only one of these design aspects and neglecting the interplay between them. Herein, to bring out importance of the idea of integration between device and particle, we reviewed the working principle of magnetophoretic system (includes both device and particle design concepts). Since, the magnetophoretic force is influenced by both field gradient and magnetization volume, hence, accurate prediction of the magnetophoretic force is relying on the availability of information on both parameters. In device design, we focus on the different strategies used to create localized high-field gradient. For particle design, we emphasize on the scaling between hydrodynamic size and magnetization volume. Moreover, we also briefly discussed the importance of magnetoshape anisotropy related to particle design aspect of magnetophoretic systems. Next, we illustrated the need for integration between device and particle design using microscale applications of magnetophoretic systems, include magnetic tweezers and microfluidic systems, as our working example. On the basis of our discussion, we highlighted several promising examples of microscale magnetophoretic systems which greatly utilized the interplay between device and particle design. Further, we concluded the review with several factors that possibly resulted in the lack of research efforts related to device and particle design integration.     

Polymer electrolytes based on acrylonitrile-butadiene-styrene copolymer

One of the approaches to improving the ionic conductivity and the mechanical strength of a solid polymer electrolyte is to use polymers in modified forms, such as polymer blends, copolymers and cross-linked polymers. In this study, a new polymer electrolyte based on the acrylonitrile-butadiene-styrene (ABS) copolymer has been prepared. The ionic conductivity, electrochemical stability and interfacial characteristics of the polymer electrolyte in contact with a lithium electrode have been investigated. The temperature dependence of the conductivity below 20 °C can be described by the Arrhenius equation, and above 20 °C by the VTF equation. Lithium passivation appeared to have taken place in the system. The conductivity and electrochemical characteristics of the system are somewhat similar to those of PAN-based polymer electrolytes. Received: 9 December 1998 / Accepted: 9 March 1999