Spectroscopic studies on methyl torsional behavior in 1-methyl-2(1H)-pyridone, 1-methyl-2(1H)-pyridinimine, and 3-methyl-2(1H)-pyridone. I. Excited state

The laser induced fluorescence excitation and dispersed fluorescence spectra of three nitrogen heterocyclic molecules 1-methyl-2(1H)pyridone (1MPY), 1-methyl-2(1H)pyridinimine (1MPI), and 3-methyl-2(1H)pyridone (3MPY) have been studied under supersonic jet cooled condition. The methyl torsional and some low frequency vibrational transitions in the fluorescence excitation spectrum were assigned for 1MPY. These new assignments modify the potential parameters to the methyl torsion reported earlier. Some striking similarities exist between the torsional and vibrational transitions in the fluorescence excitation spectra of 1MPY and 1MPI. Apart from pure torsional transitions, a progression of vibration-torsion combination bands was observed for both these molecules. The excitation spectrum of 3MPY resembles the spectrum of its parent molecule, 2-pyridone. The barrier height of the methyl torsion in the excited state of 3MPY is highest amongst all these molecules, whereas the barrier in 1MPI is higher than that of 1MPY. To get an insight into the methyl torsional barrier for these molecules, results of the ab initio calculations were compared with the experimental results. It was found that the conformation of the methyl group undergoes a 60 degrees rotation in the excited state in all these molecules with respect to their ground state conformation. This phase shift of the excited state potential is attributed to the pi*-sigma* hyperconjugation between the out-of-plane hydrogen of the methyl group and the molecular frame. It has been inferred that the change in lowest unoccupied molecular orbital energy plays the dominant role in the excited state barrier formation.     

Development and validation of an RP-HPLC method for quantitative determination of vanillin and related phenolic compounds in Vanilla planifolia

A simple and fast method was developed using RP-HPLC for separation and quantitative determination of vanillin and related phenolic compounds in ethanolic extract of pods of Vanilla planifolia. Ten phenolic compounds, namely 4-hydroxybenzyl alcohol, vanillyl alcohol, 3,4-dihydroxybenzaldehyde, 4-hydroxybenzoic acid, vanillic acid, 4-hydroxybenzaldehyde, vanillin, p-coumaric acid, ferulic acid, and piperonal were quantitatively determined using ACN, methanol, and 0.2% acetic acid in water as a mobile phase with a gradient elution mode. The method showed good linearity, high precision, and good recovery of compounds of interest. The present method would be useful for analytical research and for routine analysis of vanilla extracts for their quality control.     

A mild conversion of phenylpropropnoid into rare phenylbutanoids: (E)-4-(2,4,5-trimethoxyphenyl)but-1,3-diene and (E)-4-(2,4,5-trimethozypheny)but-1-ene occuring in Zingiber cassumunar

(E)-4-(2',4',5'-trimethoxyphenyl)but-1,3-diene (4) and (E)-4-(2',4',5'-trimethoxyphenyl)but-1-ene (6), bioactive phenylbutanoids of Zingiber cassumunar, were synthesized exclusively with trans geometry. Treatment of methylmagnesium iodide with (E)-2',4',5'-trimethoxycinnamaldehyde (2), an oxidized product of abundantly available toxic (Z)-phenylpropanoid (1) of Acorus calamus, gave (E)-4-(2',4',5'-trimethoxyphenyl)but-3-en-2-ol (3) which upon dehydration with copper sulphate/silica gel under microwave irradiation for 3 min afforded 4 in 58% yield. Further, catalytic hydrogenation of 4 with 10% Pd/C afforded 4-(2',4',5'-trimethoxyphenyl)butane (5) which upon dehydrogenation with DDQ/SiO2 afforded hypolipidemic 6 in 54% yield.     

State-resolved unimolecular dissociation of cis-cis HOONO: Product state distributions and action spectrum in the 2nuOH band region

Nascent OH fragment product state distributions arising from unimolecular dissociation of room temperature HOONO, initiated by excitation in the region of the 2nu(OH) band, are probed using laser-induced fluorescence at sub-Doppler resolution. Phase-space simulations of the measured OH rotational distributions are consistent with the dissociation dynamics being statistical and confirm that all major features in the room temperature action spectrum belong to the cis-cis conformer. The phase-space simulations also allow us to estimate the HO-ONO bond dissociation energy of cis-cis HOONO to be D(0)=19.9+/-0.5 kcal/mol, which when combined with the known heat-of-formation data for the OH and NO(2) fragments gives DeltaH(f) (0)(cis-cis HOONO)=-2.5 kcal/mol. In addition to fragment energy release, spectral features in the cis-cis HOONO action spectrum are examined with respect to their shifts upon (15)N isotope substitution and through ab initio spectral simulation using a two-dimensional dipole surface that takes into account the influence of HOON torsional motion on the OH stretching overtone. The two-dimensional spectral simulations, using CCSD(T)/cc-pVTZ dipole surface, qualitatively reproduces features appearing in the action spectrum and suggest that the strong broad feature occurring approximately 570 cm(-1) to the blue of the cis-cis HOONO 2nu(OH) peak, likely involve excitation of HOON-torsion/OH-stretch combination bands originating from thermally populated excited torsional states. A closer examination of the predictions of the two-dimensional model with experiments also reveals its limitations and suggests that a more elaborate treatment, one which includes several additional modes, will likely be required in order to fully explain the room temperature action spectrum. Ab initio calculations of the HOON torsional potential at the CCSD(T)/cc-pVTZ level of theory are also presented and confirm that cis-perp configuration does not correspond to a bound localized minimum on the HOONO potential energy surface.     

High-performance thin layer chromatography method for quantitative determination of four major anthraquinone derivatives in Rheum emodi

A high-performance thin layer chromatographic (HPTLC) method for the rapid and simple quantification of the four major anthraquinone derivatives i.e. physcion, chrysophanol, emodin and chrysophanol glycoside in Rheum emodi is described. HPTLC of anthraquinone derivatives was performed on pre-coated RP-18 F254S HPTLC plates. For achieving good separation, the mobile phase of methanol-water-formic acid (80:19:1, v/v/v) was used. The densitometric determination of anthraquinone derivatives was carried out at 445 nm in reflection/absorption mode. The calibration curves were linear in the range of 20-100 ng for physcion, 80-400 ng for chrysophanol and emodin, and 200-1000 ng for chrysophanol glycoside. The method was found to be reproducible and convenient for quantitative analysis of anthraquinone derivatives in the methanolic extract of rhizomes of R. emodi collected from three different locations of Western Himalaya, India.     

Mesoporous material as catalyst for the production of fine chemical: Synthesis of dimethyl phthalate assisted by hydrophobic nature MCM-41

Aluminum, iron and zinc containing MCM-41 molecular sieves were prepared by the hydrothermal method. The catalyst was characterized by the XRD, BET (surface area), FT–IR and ²⁹Si, ²⁷Al MAS–NMR techniques. The catalytic activity of these molecular sieves was tested with esterification reaction used with phthalic anhydride (PAH) and methanol (MeOH) in the autoclave at 135 °C, 150 °C and 175 °C. Conversion increases with an increase in temperature and mole ratio. The activity of these catalysts followed the order: Al-MCM-41 (112) > Fe-MCM-41 (115) > Al-MCM-41 (70) > Al-MCM-41 (52) > Fe-MCM-41 (61) > Al, Zn-MCM-41 (104) > Al-MCM-41 (30). The reaction yielded both monomethyl phthalate (MMP) and dimethyl phthalate (DMP). The nature of the catalyst sites has been proposed using with water as an impurity. The selectivity of the dimethyl phthalate increases with increase in temperature and mole ratio. The weight of the catalyst was optimized at 0.07 g. The hydrophilic and hydrophobic nature of the catalyst has been explained by the influence of water and the external surface acidity also facilitates the reaction and this has been confirmed by the supporting reaction.     

Chemometric analysis of groundwater quality data of alluvial aquifer of Gangetic plain, North India

Water quality data set from the alluvial region in the Gangetic plain in northern India, which is known for high fluoride levels in soil and groundwater, has been analysed by chemometric techniques, such as principal component analysis (PCA), discriminant analysis (DA) and partial least squares (PLS) in order to investigate the compositional differences between surface and groundwater samples, spatial variations in groundwater composition and influence of natural and anthropogenic factors. Trilinear plots of major ions showed that the groundwater in this region is mainly of Na/K-bicarbonate type. PCA performed on complete data matrix yielded six significant PCs explaining 65% of the data variance. Although, PCA rendered considerable data reduction, it could not clearly group and distinguish the sample types (dug well, hand-pump and surface water). However, a visible differentiation between the water samples pertaining to two watersheds (Khar and Loni) was obtained. DA identified six discriminating variables between surface and groundwater and also between different types of samples (dug well, hand pump and surface water). Distinct grouping of the surface and groundwater samples was achieved using the PLS technique. It further showed that the groundwater samples are dominated by variables having origin both in natural and anthropogenic sources in the region, whereas, variables of industrial origin dominate the surface water samples. It also suggested that the groundwater sources are contaminated with various industrial contaminants in the region.     

A new resin containing benzimidazolylazo group and its use in the separation of heavy metals

A new resin incorporating benzimidazolylazo group into a matrix of polystyrene divinylbenzene has been prepared. The exchange capacity of the resin for the ions mercury(II), silver(I) and palladium(II) as a function of pH has been determined. The resin exhibits no affinity for alkali or alkaline earth metals. It is highly selective for Hg(II), Ag(I) and Pd(II). In column operation, it has been observed that Hg(II), Ag(I) and Pd(II) in trace quantities can be selectively separated from geological, medicinal and environmental samples.     

Thermodynamic metal-ligand stability constants of rare earths with N-p-chlorophenyl-m-substituted benzohydroxamic acids

The thermodynamic metal ligand stability constants of rare earths, La³⁺, Pr³⁺, Nd³⁺, Sm³⁺, Bu³⁺, Gd³⁺ and Tb³⁺, with N-p-chlorophenyl-m-substituted benzohydroxamic acids in dioxan-water (60–70%) media at 25° C, have been determined by the potentiometric method. The effect of basicity of the ligand, central metal ion and the order of stability constants are discussed. The order of stability constants of rare earths with the hydroxamic acids is La<Pr<Nd<Sm<Eu<Gd>Tb.     

Electrocatalytic Hydrogen Evolution Using A Molecular Antimony Complex under Aqueous Conditions: An Experimental and Computational Study on Main-Group Element Catalysis

Electrocatalytic hydrogen gas production is considered a potential pathway towards carbon-neutral energy sources. However, the development of this technology is hindered by the lack of efficient, cost-effective, and environmentally benign catalysts. In this study, a main-group-element-based electrocatalyst, SbSalen , is reported to catalyze the hydrogen evolution reaction (HER) in an aqueous medium. The heterogenized molecular system achieved a Faradaic efficiency of 100 % at −1.4 V vs. NHE with a maximum current density of −30.7 mA/cm². X-ray photoelectron spectroscopy of the catalyst-bound working electrode before and after electrolysis confirmed the molecular stability during catalysis. The turnover frequency was calculated as 43.4 s⁻¹ using redox-peak integration. The kinetic and mechanistic aspects of the electrocatalytic reaction were further examined by computational methods. This study provides mechanistic insights into main-group-element electrocatalysts for heterogeneous small-molecule conversion.