Potentiometric study of the protonation and distribution equilibria of d-gluconic-delta-lactone acid in sodium perchlorate solutions at 25 degrees C and construction of a thermodynamic model

The protolytic behavior of d-gluconic-delta-lactone acid has been studied by means of automated potentiometric titrations at different ionic strengths in the range 0.1相似文献   

Surface properties of Reactive Yellow 2 immobilised pHEMA and HEMA/chitosan membranes: characterisation of their selectivity to different proteins

Poly(hydroxyethyl methacrylate), pHEMA, and a composite pHEMA/chitosan networks were synthesized in the membrane form via UV initiated photo-polymerisation in the presence of an initiator ,′-azoisobutyronitrile. Reactive Yellow 2 (RY-2) was covalently immobilised as a dye–ligand onto both membranes. The polarity and surface energy of the investigated membranes were determined by contact angle measurement. The incorporation of chitosan in the pHEMA networks produced more hydrophilic surface, as indicated by contact angle analysis. The binding characteristics of lysozyme, γ-globulins, human serum albumin (HSA) and bovine serum albumin (BSA) to pHEMA-RY-2 and pHEMA/chitosan-RY-2 affinity membranes have been investigated from aqueous solution and their dye–ligand free forms were used as control systems. When chitosan was incorporated in the pHEMA network as a cationic polymer led to higher adsorption capacity for the lysozyme. Selective adsorption behaviour was also observed in the case of pHEMA/chitosan-RY-2 membrane for the lysozyme. The non-specific adsorptions of the lysozyme on the pHEMA and pHEMA/chitosan membranes were about 1.9 and 7.2 mg/ml, respectively. These were negligible for all others investigated proteins. The lysozyme adsorption data was analysed using the first-order and the second-order models. The first-order equation in both affinity membrane systems is the most appropriate equation to predict the adsorption capacities of the adsorbents. The adsorption isotherms well fitted the combined Langmuir–Freundlich model. A theoretical analysis has been conducted to estimate the thermodynamic contributions (changes in enthalpy, entropy and Gibbs free energy) for the adsorption of lysozyme to both dye–ligand immobilised membranes. The adsorption capacities of both dye–ligand immobilised membranes increased with increasing the temperature while decreased with increasing the NaCl concentration. Both affinity membranes are stable when subjected to sanitization with sodium hydroxide after repeated separation–elution cycles.     

Derivatization procedures for the detection of beta(2)-agonists by gas chromatographic/mass spectrometric analysis

An evaluation of derivatization procedures for the detection of beta(2)-agonists is presented. The study was performed with the beta(2)-agonists bambuterol, clenbuterol, fenoterol, formoterol, salbutamol, salmeterol and terbutaline. Different derivatizating agents were employed, aiming to obtain derivatives with high selectivity to be used in the gas chromatographic/mass spectrometric analysis of beta(2)-agonists in biological samples. Trimethylsilylation was compared with different agents and the role of some catalysts was evaluated. Acylation, combined trimethylsilylation and acylation, and the formation of cyclic methylboronates were also studied. Sterical hindrance caused by different substituents at the nitrogen atom of the beta-ethanolamine lateral chain of beta(2)-agonist molecules is mainly responsible for differences in the abundances of the derivatives obtained. The use of catalysts produces an increase in the derivatization yield, especially for compounds with low steric hindrance (substituents with primary and secondary carbon atoms). The formation of trimethylsilyl (TMS) ethers is not influenced by structural molecular differences when only hydroxy groups are involved in derivatization. Combined trimethylsilylation and acylation showed that compounds with a secondary carbon atom linked to the nitrogen atom form mainly N-TFA-O-TMS derivatives, with a small amount of N-TMS-O-TMS derivatives. Compounds with tert-butyl substituents at the amino group (bambuterol, salbutamol and terbutaline) formed O-TMS derivatives as the main products, although a limited amount of trifluoroacylation at the nitrogen atom also occurred. Cyclic methylboronates were formed with bambuterol, clenbuterol, formoterol, salbutamol and salmeterol. Owing to hydroxy substituents in unsuitable positions for ring formation, this procedure was not effective for fenoterol and terbutaline. Mass spectra of different derivatives and tentative fragmentation profiles are also shown. For screening purpose (e.g. sports drug testing), derivatization with MSTFA or BSTFA alone is recommended as a comprehensive derivatization technique for beta(2)-agonists owing to minimal by-product formation; formation of cyclic methylboronates can be useful for confirmation purposes. Detection limits were obtained for the TMS and cyclic methylboronate derivatives using the derivatizing reagents MSTFA and trimethylboroxine, respectively. For most of the compounds, lower detection limits were found for the TMS derivatives.     

Diastereoselective synthesis of 3,4-disubstituted 5-(p-tolylsulfinyl)-5,6-dehydropiperidin-2-ones: chirality transfer in the enantioselective synthesis of ethyl (+)-(3S,4aS,7aS)-1-oxo-octahydro-1H-cyclopenta[c]pyridine-3-carboxylate

The base-mediated reaction of enantiomerically pure -sulfinylketimine (+)-1 with (E)-,β-disubstituted propenoate esters afforded 3,4-disubstituted-5-(p-tolylsulfinyl)-5,6-dehydropiperidin-2-ones 9-13 and 14 with high or complete diastereoselectivity. A sole diastereomer of the four possible ones, with regard to the nature of ester, was isolated, which revealed the stereocontrol of the chiral sulfinyl group in the Michael reaction and transenolization steps. In addition, the enantioselective synthesis of ethyl (+)-(3S,4aS,7aS)-1-oxo-octahydro-1H-cyclopenta[c]pyridine-3-carboxylates (+)-17 is described (five steps; 47% yield; ee 97%). The absolute configuration of stereocentres introduced in (+)-17 was assigned on the basis of ¹H NMR data.     

Diffusion layer titration of dipyrone in pharmaceuticals at a dual-band electrochemical cell

This paper describes the use of a thin-layered dual-band electrochemical cell operating at flow conditions to determine dipyrone (sodium salt of 1-phenil-2,3-dimethyl-4-methylaminomethanesulfonate-5-pyrazolone) by reaction with electrogenerated iodine. The electrolytic cell consisted of two closely spaced gold electrodes, the upper stream electrode serving as the generator electrode and the downstream electrode working as the collector electrode. A linear dynamic range from 2 to 15 μmol l⁻¹ dipyrone was obtained by using a sample volume of 100 μl, with a detection limit of 1.1 μmol l⁻¹. Standard deviation (S.D.) of 3.4% for 20 repetitive injections of a 40 μmol l⁻¹ dipyrone solution and sampling frequency of 90 h⁻¹ were achieved. The results obtained with the thin-layered dual-band electrochemical cell for dipyrone determination in three different pharmaceutical samples compared well with those found by iodimetry with coulometrically generated iodine.     

Multivariate optimisation of the experimental conditions for determination of three methylxanthines by reversed-phase high-performance liquid chromatography

Caffeine (1,3,7-trimethylxanthine), theobromine (3,7-dimethylxanthine) and theophylline (1,3-dimethylxanthine) are the most important naturally occurring methylxanthines. Caffeine is a constituent of coffee and other beverage and included in many medicines. Theobromine and theophylline are formed as metabolites of caffeine in humans, and are also present in tea, cocoa and chocolate products.

In order to improve the chromatographic resolution (R_s) with a good analysis time, experimental designs were applied for multivariate optimisation of the experimental conditions of an isocratic reversed-phase high-performance liquid chromatographic (RP-HPLC) method used for the simultaneous determination of caffeine, theobromine and theophylline. The optimisation process was carried out in two steps using full three-level factorial designs. The factors optimised were: flow rate and mobile phase composition. Optimal conditions for the separation of the three methylxanthines were obtained using a mixture of water/ethanol/acetic acid (75:24:1%, v/v/v) as mobile phase and a flow rate of 1.0 mL min⁻¹. The RP-HPLC/UV method was validated in terms of limit of detection (LOD), limit of quantitation (LOQ), linearity, recovery and the precision, calculated as relative standard deviation (R.S.D.). In these conditions, the LOD was 0.10 μg L⁻¹ for caffeine, 0.07 μg L⁻¹ for theobromine and 0.06 μg L⁻¹ for theophylline. The proposed method is fast, requires no extraction step or derivatization and was suitable for quantification of these methylxanthines in coffee, tea and human urine samples.     

Elucidating interactions of ionic liquids with polymer films using confocal Raman spectroscopy

We report on the molecular interactions between room-temperature ionic liquids (RTILs) and Nafion and PDMS membranes, proving that in contact with these polymers RTILs behave like electrolytes rather than solvents.     

Fractionation of metals and metalloids by chemical bonding from particles accumulated by electrostatic precipitation in an Argentine thermal power plant

A study was undertaken to evaluate the distribution of Al, As, Cr, Cu, Fe, Mn, Ni, Pb, Ti, V and Zn in fly ashes collected in the electrostatic precipitator of a thermal power plant in San Nicolás (Argentina). Five samples were collected during one week of operation. For the fractionation, the scheme applied consisted in extracting the elements in four fractions namely (i) soluble and exchangeable elements; (ii) carbonates, oxides and reducible elements; (iii) bound to sulfidic metals; and (iv) residual elements. Metals and metalloids at μg g^− 1 level were determined in each fraction by inductively coupled plasma optical emission spectrometry (ICP OES). For validation, a standard reference material (SRM 1633 coal fly ash) from NIST was subjected to the same chemical sequential extraction procedure that the samples. X-ray diffraction powder (XRD) analysis and scanning electron microscopy (SEM) were used to characterize the major minerals present in the matrix. Total analyte concentration (in μg g^− 1) varied from 10.6 for Pb to 17,622 for Al. Minimum and maximum concentrations (in μg g^− 1) found in individual samples in the four fractions were: Al, 92.7–9668; As, < 0.3–143; Cr, 2.0–10.4; Cu, < 0.2–35.6; Fe, < 0.3–4992; Mn, < 0.1–128; Ni, < 0.3–139; Pb, < 0.5–9.1; Ti, < 0.3–2243; V, 17.0–112.9; and Zn, < 0.1–68.2. The leachability of the 11 elements under study proved to be different. Low percentages of Al (1%), V (7%) and Cr (8%) were detected in the most bioavailable fraction. Arsenic was found to be most abundant in the non-silicate phase, represented by the second and third fractions, while Cr, Fe, Ni, Pb and Zn were mostly associated to the residual fraction.     

Multiple bonds between main group elements and transition metals, 155. (Hexamethylphosphoramide) methyl(oxo) bis(η-peroxo)rhenium(VII), the first example of an anhydrous rhenium peroxo complex: crystal structure and catalytic properties

Methyl(oxo)bis(η²-peroxo)rhenium(VII)1, the active species of the system CH₃ReO₃/H₂O₂ in the catalytic oxidation of different organic and organometallic compounds, is stabilized by a water molecule attached to the rhenium center. This water molecule can be removed and substituted by hexamethylphosphoramide (HMPA) to yield (hexamethylphosphoramide)methyl(oxo)bis(η²-peroxo rhenium(VII) (3). The synthesis, crystal structure (X-ray difraction study), and catalytic properties of which compound are reported. Crystal data are as follows: monoclinic, space group P2₁/n, A = 900.76(7) pm, B = 1229.80(11) pm, C = 1318.57(11) pm, β = 90.251(7)°, R_w = 0.034 for 1878 reflections. The catalytic properties of compound 3 in the oxidation of olefins with H₂O₂ are similar to those of 1.     

The relationship between the structures of Cu(II) complexes and their chemical transformations

The paper presents the results of a study of M ₂ ^I M ^II(SO₄)₂ compounds withM ^I= K, Rb, Cs or Tl, andM ^II=Cu or Ni, in the interval from room temperature to the melting temperature. All the compounds studied show endo- or exothermic excursions in their DTA curves, corresponding to phase transitions connected with colour changes of the compounds. For M ₂ ^I Cu(SO₄)₂, whereM ^I is K or Tl, several modifications could be prepared at laboratory temperature, probably distortion isomers. No modifications of this type could be prepared, however, for M ₂ ^I Ni(SO₄)₂ compounds.

---

Zusammenfassung Die Ergebnisse einer Untersuchung von M ₂ ^I M ^II(SO₄)₂-Verbindungen Cs, Tl;M ^II=Cu, Ni) im Temperaturbereich von Raum- bis Schmelztemperatur werden beschrieben. Alle untersuchten Verbindungen zeigen in ihren DTA-Kurven mit Farbänderungen einhergehende, durch Phasenumwandlungen bedingte endo- und exotherme Peaks. Bei Laboratoriumstemperatur konnten verschiedene Modifikationen von M ₂ ^I Cu(SO₄)₂ (mitM ^I gleich K oder Tl) hergestellt werden, wobei es sich wahrscheinlich um Distorsionsisomere handelt. Keine Modifikationen dieses Typs konnten jedoch für M ₂ ^I Ni(SO₄)₂ erhalten werden.

---

M ₂ ^I M ^II(SO₄)₂, ¹-, Rb, Cs Tl, aM ¹¹-Cu Ni, . - -, , . M ₂ ^I Cu(SO₄)₂, ¹- l, , , , . , M _i ² Ni(SO₄)₂ .