ALL-trans β-CAROTENE-5,6-EPOXIDE IN THYLAKOID MEMBRANES

All- trans β-carotene-5,6-epoxide has been found in the thylakoid membranes of spinach and of the cyanobacterium Synechococcus vulcanus Copeland. The epoxide was extracted from the thylakoid membranes with acetone, and was isolated by high-performance liquid chromatography (HPLC). The structure of the epoxide was identified by means of mass, Raman, and electronic absorption spectroscopy. Changes in the amount of the epoxide, as a result of epoxidation and (apparent) de-epoxidation reactions in the membranes, were traced by analysis of extracts on HPLC. In isolated thylakoid membranes, only the epoxidation reaction took place. The reaction was caused by irradiation or by the addition of ferricyanide, suggesting that electron transport reactions in the membranes are involved in the epoxidation. In intact spinach leaves, however, both epoxidation and de-epoxidation took place; the extent of epoxidation correlated with the intensity of light incident on the leaves. The epoxidation and de-epoxidation of all- trans β-carotene are contrasted with those of xanthophylls (in the violaxanthin cycle).     

Preparation and characterization of spherical polymer packings from polybutadiene for size-exclusion chromatography

Porous polymer spherical particles for column packings in nonaqueous size-exclusion chromatography (SEC) were prepared from 1,2-syndiotactic polybutadiene by suspension and evaporation method. The polymer microbeads obtained were crosslinked by radical reaction between 2-vinyl groups in polybutadiene with ultraviolet radiation, to render them insoluble. These microbeads have wider chromatographic separation width than polystyrene column packings. In addition, the polybutadiene microbeads did not show the excessive retention observed with commercial polystyrene columns for polycyclic aromatic compounds. Therefore, a close correlation between the elution volume and M, for polycyclic aromatic compounds was observed with polybutadiene microbeads columns.     

Participation of lipid peroxidation in rat pertussis vaccine pleurisy. III. Thiobarbituric acid (TBA) reactant and lysosomal enzyme

Activity of lysosomal enzymes, such as N-acetyl-beta-D-glucosaminidase (NAG), was assayed in exudate on a rat model of Bordetella pertussis vaccine pleurisy. Thiobarbituric acid (TBA)-reactive substances (TBA.R) and superoxide dismutase (SOD) activity were then monitored in the exudate on the acute phase response in this inflammatory model. Retention of the exudate in the pleural space increased rapidly after the challenge, and the exudate volume at 24 h reached about three times the volume at 6 h. The activity of SOD at 6 h was shown to be higher than that at 24 h after the challenge, thus showing negative correlations with TBA-R levels and exudate volume. The levels of TBA.R rapidly increased and reached maximum values at 24 h. It was concluded that the above three parameters correlated to the acute phase response in this inflammatory model.     

Identification of conjugation positions of urinary glucuronidated vitamin D3 metabolites by LC/ESI–MS/MS after conversion to MS/MS‐fragmentable derivatives

A liquid chromatography/electrospray ionization–tandem mass spectrometry‐based method was developed for the identification of the conjugation positions of the monoglucuronides of 25‐hydroxyvitamin D₃ [25(OH)D₃] and 24,25‐dihydroxyvitamin D₃ [24,25(OH)₂D₃] in human urine. The method employed derivatization with 4‐(4‐dimethylaminophenyl)‐1,2,4‐triazoline‐3,5‐dione to convert the glucuronides into fragmentable derivatives, which provided useful product ions for identifying the conjugation positions during the MS/MS. The derivatization also enhanced the assay sensitivity and specificity for urine sample analysis. The positional isomeric monoglucuronides, 25(OH)D₃‐3‐ and ‐25‐glucuronides, or 24,25(OH)₂D₃‐3‐, ‐24‐ and ‐25‐glucuronides, were completely separated from each other under the optimized LC conditions. Using this method, the conjugation positions were successfully determined to be the C3 and C24 positions for the glucuronidated 25(OH)D₃ and 24,25(OH)₂D₃, respectively. The 3‐glucuronide was not present for 24,25(OH)₂D₃, unlike 25(OH)D₃, thus we found that selective glucuronidation occurs at the C24‐hydroxy group for 24,25(OH)₂D₃.     

Synthesis of end‐functionalized polyethers by phosphazene base‐catalyzed ring‐opening polymerization of 1,2‐butylene oxide and glycidyl ether

For the living ring‐opening polymerization (ROP) of epoxy monomers, the catalytic activity of organic superbases, tert‐butylimino‐tris(dimethylamino)phosphorane, 1‐tert‐butyl‐2,2,4,4,4‐pentakis(dimethylamino)‐2Λ⁵,4Λ⁵‐catenadi(phosphazene), 2,8,9‐triisobutyl‐2,5,8,9‐tetraaza‐1‐phosphabicyclo[3.3.3]undecane, and 1‐tert‐butyl‐4,4,4‐tris(dimethylamino)‐2,2‐bis[tris(dimethylamino)phosphoranylidenamino]‐2Λ⁵,4Λ⁵‐catenadi(phosphazene) (t‐Bu‐P₄), was confirmed. Among these superbases, only t‐Bu‐P₄ showed catalytic activity for the ROP of 1,2‐butylene oxide (BO) to afford poly(1,2‐butylene oxide) (PBO) with predicted molecular weight and narrow molecular weight distribution. The results of the kinetic, post‐polymerization experiments, and MALDI‐TOF MS measurement revealed that the t‐Bu‐P₄‐catalyzed ROP of BO proceeded in a living manner in which the alcohol acted as the initiator. This alcohol/t‐Bu‐P₄ system was applicable to the glycidol derivatives, such as benzyl glycidyl ether (BnGE) and t‐butyl glycidyl ether, to afford well‐defined protected polyglycidols. The α‐functionalized polyethers could be obtained using different functionalized initiators, such as 4‐vinylbenzyl alcohol, 5‐hexen‐1‐ol, and 6‐azide‐1‐hexanol. In addition, the well‐defined cyclic‐PBO and PBnGE were successfully synthesized using the combination of t‐Bu‐P₄‐catalyzed ROP and click cyclization. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Cyclic sample pooling using two‐dimensional liquid chromatography system enhances coverage in shotgun proteomics

We report a cyclic sample pooling technique devised in two‐dimensional liquid chromatography–electrospray ionization mass spectrometry (LC‐ESI‐MS) shotgun proteomics that renders deeper proteome coverage; we combined low pH reversed‐phase (RP) LC in trifluoroacetic acid in the first dimension, followed by cyclic sample pooling of the eluate and low‐pH RP‐LC in formic acid in the second dimension. The new protocol has a significantly higher resolving power suitable for LC‐ESI‐MS/MS shotgun proteomics. Copyright © 2013 John Wiley & Sons, Ltd.     

Charge density dependence of solution and gel behaviors of maleic acid-containing polyelectrolytes

Two kinds of polyelectrolytes containing maleic acid component (MA copolymers), i.e., poly(styrene-alt-maleic acid) (PSMA) and poly(vinyl methyl ether-alt-maleic acid) (PVMEMA), were investigated on their polymer chain dimensional changes in solution, and also in gel phase for the latter, as a function of the polymer charge density or pH of the (immersing) solution. Being different from common poly(carboxylic acid)s such as poly(acrylic acid), both of the MA copolymers showed maximum in the reduced viscosity or the gel size with increasing the charge density or the solution pH. The maximum in the reduced viscosity was much more significant for PSMA than PVMEMA. To see if intramolecular hydrogen bond between a pair of dissociated and undissociated carboxyl groups in an MA residue contributes to the emergence of the peak or not, similar measurements were performed also in the presence of concentrated urea (5 M). Almost the same values were obtained up to the peak position for the reduced viscosity and the gel swelling degree with increasing pH of the (immersing) solutions, which strongly suggested that the supposed effect is negligible, if any. All the results including those for PVMEMA system were interpreted in terms of the ionomer-like conformational change (ion cluster formation) of polyelectrolytes that has been often observed when the polymer charges are in rather less polar circumstances.     

Synthesis and Cation-Binding Properties of (1→6)-2,5-Anhydro-D-glucitol with 3,4-Di-O-Pentyl and Decyl Groups by Cyclopolymerization of 1,2:5,6-Dianhydro-D-mannitols

Abstract

The cyclopolymerizations of 1,2:5,6-dianhydro-3,4-di-O-pentyl-D-mannitol (1b) and 1,2:5,6-dianhydro-3,4-di-O-decyl-D-mannitol (1c) were carried out using BF₃OEt₂ and t-BuOK. All the resulting polymers consisted of cyclic constitutional units, i.e., the extent of cyclization was 100%. The polymer structures for the polymerization with t-BuOK were (1→6)-2,5-anhydro-3,4-di-O-pentyl-D-glucitol (2b) and (1→6)-2,5-anhydro-3,4-di-O-decyl-D-glucitol (2c), whereas those with BF₃O-decyl₂ comprised 2,5-anhydro-D-glucitols as major units along with other cyclic ones. These polymers were soluble in n-hexane, CHCl₃, and THF, but insoluble in water, which differs from the amphiphilic solubility of (1→6)-2,5-anhydro-3,4-di-O-methyl-D-glucitol (2a). The cation-binding properties of 2b and 2c were examined using alkali-metal picrates in order to compare them with those of 2a. The extraction yields for each cation decreased in the order of 2c < 2b < 2a. Every polymer exhibited a similar cation-binding selectivity in the order Cs⁺ > Rb⁺ > K⁺ ? Na⁺ > Li⁺. The ratio of K⁺ and Na⁺, K⁺/Na⁺, was 4.6 for 2a, 5.1 for 2b, and 7.1 for 2c in the increasing order 2a < 2b > 2c.